Blastmaster 3.5 cu. ft. S-Series Abrasive Blasting Pot

At a Glance
highlights
Accessories

An abrasive blasting pot is a pressure vessel used to contain a supply of abrasive material during the abrasive blasting process. Used as part of an abrasive blasting system, the abrasive blasting pot delivers a mixture of abrasive and compressed air to the blast nozzle for surface preparation. The Blastmaster 3.5 Cu. Ft. S-Series Abrasive Blasting Pot uses a pressure-release remote control system, allowing the vessel to depressurize when the remote control switch is deactivated, dropping a pop-up valve for the abrasive blasting pot to be refilled. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, railcar shops, and storage tanks. Common abrasives used include aluminum oxide, crushed glass, garnet, mineral abrasives, and slags.

Reduced Cost
The Blastmaster 123 Remote Control System allows the operator to remotely activate and deactivate the abrasive blasting pot from the nozzle, eliminating the need for a pot tender.

Enhanced Safety
OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). The remote control system meets the OSHA requirement by providing a Fail-to-Safe configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.

Portability
A heavy-duty handle, 10 inch semi-pneumatic tires, and lifting lugs allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.

Features:

3.5 Cubic Foot Capacity
Blastmaster Exhaust Muffler
Galvanized pipe fittings
Two lifting lugs
10 inch semi-pneumatic tires
Empty weight: 291 lbs
Overall height: 48 inch
Fill height: 42 inch
Width: 21 inch
Depth: 25 inch

	The Blastmaster 125 Remote Control System is a dual Fail to Safe configuration including a 1-1/2 inch inlet valve, 1 inch outlet valve, abrasive trap, remote control line, and a remote control switch.
	The Blastmaster 3.5 cu. ft. M-Series Abrasive Blasting Pot steep angle, 90 degree cone bottom provides significantly improved abrasive flow versus a 60 degree dished cone.

	Blastmaster Junior Extractor Moisture Separator Blastmaster Junior Extractor Moisture Separator removes excess moisture, oil, and other debris from compressed air before entering the abrasive blasting pot.
	Abrasive Screen, Heavy-Duty Lid and Umbrella The abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the abrasive blasting pot.

3.5 Cu. Ft. S-Series Abrasive Blasting Pots
Model	Description
1035003	Pneumatic Remote Control System and 1-1/2 inch Metering Valve
1035003PKA	(PN#1035003) + 1-1/4 inch Extractor Abrasive Blasting Pot Moisture Separator
1035003LS	(PN#1035003) + Loading Skid
1035003PKALS	(PN#1035003) + 1-1/4 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid
	Installed with:
1035006	12V DC Electric Remote Control System and 1-1/2 inch Metering Valve
1035006PKA	(PN#1035006) + 1-1/4 inch Extractor Abrasive Blasting Pot Moisture Separator
1035006LS	(PN#1035006) + Loading Skid
1035006PKALS	(PN#1035006) + 1-1/4 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid
	Installed with:
1035009	120V AC Electric Remote Control System and 1-1/2 inch Metering Valve
1035009PKA	(PN#1035009) + 1-1/4 inch Extractor Abrasive Blasting Pot Moisture Separator
1035009LS	(PN#1035009) + Loading Skid
1035009PKALS	(PN#1035009) + 1-1/4 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid
All of the above configurations are also available with a 1-1/4 inch Blastmaster Bantam Abrasive Metering Valve