The SawStop 10 inch Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStops legendary safety system, ground breaking dust collection and flawless fit and finish its ready to help you get the job done.
Now the Professional Cabinet Saw is available in a 1.75HP motor configuration. Plug in anywhere with 110 volt convenience!
WHATS NEW:
Specification | |
---|---|
1.75HP 110V | |
Overall saw dimensions: |
44 w x 29 3/4 d x 34 h inch
61 3/4 w x 31 1/8 d x 34 h inch
69 1/8 w x 33 d x 34 h inch
85 1/4 w x 33 d x 34 h inch |
Motor: |
1.75 hp, 1 phase, 110 V, 14 A |
Weights: |
367 lbs (with Premium Fence Assembly and 30 inch rails)
408 lbs (with T-Glide Fence System and 36 inch rails) 431 lbs (with T-Glide Fence System and 52 inch rails) |
Shipping weight (approx.): | 381 lbs (table saw only) |
Max. rip, right of blade: |
30 inch (with 30 inch rails)
36 inch (with 36 inch rails) 52 inch (with 52 inch rails) |
All Professional Cabinet Saws | |
Cabinet footprint: | 19 3/8 w x 19 3/8 d inch |
Cast iron table: | 20 w x 27 d inch, 44 w x 27 inch d (w/ extension wings) |
Extension wing: | 12 w x 27 d inch |
Extension table (optional): | 23 3/4 w x 27 d inch (36 inch rails), 40 1/8 w x 27 d inch (52 inch rails) |
Blade: | 40-tooth, professional grade, 5/8 inch arbor |
Blade diameter: | 10 inch |
Blade tilt: | Left |
Blade kerf: | 0.118 inch (3mm) |
Blade plate thickness: | 0.078 inch (2mm) |
Max. depth of cut, blade at 0ú: | 3 1/8 inch |
Max. depth of cut, blade at 45ú: | 2 1/4 inch |
Max. rip, left of blade: | 12 inch |
Dado diameter: | 8 inch (requires a separate brake cartridge and table insert) |
Dado max. width: | 13/16 inch |
Arbor diameter at blade: | 5/8 inch |
Main bearing size: | 62mm OD x 30mm ID |
Second bearing size: | 52mm OD x 25mm ID |
Table in front of blade (max. elevation): | 10 1/4 inch |
Table behind blade (max. elevation): | 7 1/2 inch |
Arbor runout: | 0.001 inch Maximum allowable runout |
Blade lateral movement over full elevation range: | 0.006 inch Maximum |
Table flatness measured diagonally: | 0.010 inch Maximum gap |
Overall table and extension wing flatness: | 0.025 inch Maximum gap |
Blade alignment with miter slot: | 0.010 inch Maximum displacement |
Deviation of miter gauge indexing stops from actual: | + / - 0.25 degrees |
Alignment between spreader and blade: | 0.010 inch Maximum difference |
Miter slots: | T-shaped, 3/4 inch at top, 1 inch at bottom, 3/8 inch deep |
Dust collection port diameter: | 4 inch |
Riving knife / splitter thickness: | 0.078 inch (2mm) |
Blade guard: | polycarbonate, extends only 5/8 inch to right of blade |
Insert: | zero clearance, steel core, ABS surfaces |
Hand wheels: | 7 inch diameter, cast iron with chrome handle |
Belts: | 2 V-ribbed belts arbor belt is static dissipative |
Models and Accessories | |
---|---|
Part Number | Description |
PCS175-PFA30 | 1.75HP Professional Cabinet Saw with 30 inch Premium fence system, rails and extension table |
PCS175-TGP236 |
1.75HP Professional Cabinet Saw with 36 inch Professional T-Glide fence system, rails and extension table |
PCS175-TGP252 |
1.75 HP Professional Cabinet Saw with 52 inch Professional T-Glide fence system, rails and extension table |
Accessories | |
---|---|
Part Number | Description |
TSG-DC | Dust Collection Blade Guard |
TSG-MG | Micro Blade Guard |
TSA-ODC | Over-Arm Dust Collection Assembly (Tubing to connect TSG-DC to 4" port on CNS-DCP) |
MB-PCS-000 | Professional Saw Mobile Base |
CNS-CIWA | Cast Iron Wing Assembly (pair) |
CNS-07-017 | Cast Iron Extension Wing (single) |
OFT30-CNS-000 | 30 inch Out-Feed Table Assembly |
TSBC-10R2 | Brake Cartridge for 10 inch Blade (fits models ICS, PCS, CNS) |
TSDC-8R2 | Dado Brake Cartridge for 8" Blade (fits models, ICS, PCS, CNS) |
TSI-SLD | Standard Lock Down Insert |
TSI-DLD | Dado Lock Down Insert |
CNS-JSC | Job Site Cart |
CNS-DCP | Dust Collection Panel (to allow for 4 or 2.5 inch dust port connection) |
BTS-R-40ATB | Titanium Series Premium Woodworking Blade - 40 Tooth, ATB, Ripping Blade |
BTS-P-80HATB | Titanium Series Premium Woodworking Blade - 80 Tooth, High ATB, Plywood Blade |
CNS-07-148 | Steel Combination Blade - 40 Tooth, ATB, Carbide Tipped |
CB104 184 | Steel Combination Blade - 60 Tooth, ATB, Carbide Tipped |
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1
IN STOCK ITEM ONLY, SUBJECT TO CHANGE, CALL FOR ANY DETAILS @ 800-458-3687 X 1