Technical Sales 1–800–458–3687

SMH Series Specs

 

 

Specifications
Model A B C D E F
SMH-1/2T 5-1/2 4 5/8 2 1-1/4 7/8 1-3/8
SMH-1T 6-5/8 5 3/8 2-1/8 1-7/6 1-1/8 1-9/16
SMH-1-1/2T 7-3/4 6 2-5/8 1-7/16 1-1/4 1-3/4
SMH-2T 8-7/8 6 1/4 2-5/8 2-1/2 1-3/8 2
SMH-3T 8-1/2 6 3-5/8 2-3/4 1-3/4 2-1/4
SMH-5T 9-1/2 7 4-1/2 3 2 2-5/8
SMH-10T 17-1/2 7 12-1/4 4 3 3-1/2

1/2, 1, 1-1/2, 2, 3, 5 TON HOISTS 10 TON HOIST

IMPORTANT: Before installation, read owner¹s manual for additional warnings and precautions. Not for use in explosive environment.

NOTE: Custom lifts are available in any length desired. However, custom lift hoists are not returnable. Hand chain drop equals lift length on standard lifts.

CAUTION: Be sure that supporting structures and load-attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.


Specifications
Model Cap¹y (lbs) Standard Lifts (ft) Headroom (in) No. of Falls Load Chain (Dia/mm) Req. Hand Chain (ft) To Lift Load 1 ft. Lbs Pull to Lift Cap¹y Net Wt (lbs)
SMH-1/2T 1,100 10,15,20,30 13 1 5 32 49 20,25,29,40
SMH-1T 2,200 10,15,20,30 15 1 6.3 37 80 27,33,38,51
SMH-11/2T 3,520 10,15,20,30 17-1/2 1 7 58 82 41,49,56,69
SMH-2T 4,400 10,15,20,30 18-1/2 1 8 70 91 46,53,60,75
SMH-3T 6,820 10,15,20,30 23-1/2 2 7 116 86 60,71,80,102
SMH-5T 11,000 10,15,20,30 28 2 9 172 97 91,106,122,153
SMH-10T 22,000 10,15,20,30 35 4 9 344 104 177,205,232,287

There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.
Copyright © 2024 Smith-Hamilton, Inc
0.001 150419 18:39