Sand two grits in a single pass with a 50-2 Double Drum Sander. Featuring INTELLISAND Technology and a 7-1/2 HP motor, you can significantly reduce the amount of time
you spend sanding.
The 50-2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 7-1/2 HP motor. Available in Single and 3 Phase power.
This model is proudly made in the USA.
What is the difference between your drum sanders and other brands?
Intellisand automatically adjust feed speed to help prevent burning of stock. They also increase abrasive life and prevent damaging sander if over fed, set too deep or stock is thicker in middle or end.
All SuperMax sander have infinitely adjustable conveyor feed rates for precise settings.
All SuperMax sanders use a self-cooling drum which effectively dissipates heat from sanding, thus extending abrasive life, reducing the chance of burning and prevents over-heating and warping of the drum.
All SuperMax drum sanders are precision engineered for long life.
All SuperMax sanders use a computer balanced drum(s) and drive train components to prevent ripple on the surface of stock being processed and to extend life of bearings and other parts.
All SuperMax drum sanders use an exclusive abrasive conveyor belt which offers the best grip and no-give grip to stock being sanded.
All SuperMax drum sanders use a patented self-tightening abrasive attachment system, making the common task of changing abrasives fast, simple and tool free.
Maximum Width (in): 50
Minimum Length (in): 3-1/2
Maximum Thickness (in): 12
Minimum Thickness (in): 1/32
|Dimensions HxWxD (in):||50 x 71 x 31|
|Drum speed:||1740 RPM|
|Dust Hood:||Steel hood, hinged at back, three (3) 4 inch vacuum ports, min. 1800 CFM recommended|
|Ball bearings (1â):||4, sealed and permanently lubricated|
|Conveyor Motor:||220 in.-lb. torque, direct drive D.C. motor, ranged variable 0-15 FPM|
|Drive Motor (TEFC):||7-1/2 HP, 1740 RPM, 208-230V, 60HZ|
|Power Requirements:||1 PH, 50 amp service; 3 PH 30 amp service|
|Shipping Weight (lbs):||820|
|MX-750102||50 x 2 Double Drum, 220V- 1PH|
|MX-750302||50 x 2 Double Drum, 220V- 3PH|
|MX-59120||Abrasive Cleaning Stick|
|60-0350||Replacement Conveyor Belt|
|MX-98-0070||Rack-N-Roll Abrasive Storage Shelf|
|Specify||Pre-Marked Abrasive Rolls, aluminum oxide, 36-220 grit (specify)|
|Specify||Pre-Marked Abrasive Rolls, zirconium (2-5 times longer life over Aluminum Oxide) 24-120 grit (specify)|
|Bulk Paper Usage Chart|
|24 and 36 Grit||60 Grit and Finer|
|Drum Size||Number of Wraps||Drum Size||Number of Wraps|
|Pre-Marked Rolls - Ready toCut|
|60-9036||36 Grit: Premium Pre-Marked Rolls|
|60-9060||60 Grit: Premium Pre-Marked Rolls|
|60-9080||80 Grit: Premium Pre-Marked Rolls|
|60-9100||100 Grit: Premium Pre-Marked Rolls|
|60-9120||120 Grit: Premium Pre-Marked Rolls|
|60-9150||150 Grit: Premium Pre-Marked Rolls|
|60-9180||180 Grit: Premium Pre-Marked Rolls|
|60-9220||220 Grit: Premium Pre-Marked Rolls|
|Zirconium (2-5 times longer life over Aluminum Oxide)|
|60-8024||24 Grit: Klingspor Blue, Pre-Marked Rolls|
|60-8036||36 Grit: Klingspor Blue, Pre-Marked Rolls|
|60-8050||50 Grit: Klingspor Blue, Pre-Marked Rolls|
|60-8060||60 Grit: Klingspor Blue, Pre-Marked Rolls|
|60-8080||80 Grit: Klingspor Blue, Pre-Marked Rolls|
|60-8120||120 Grit: Klingspor Blue, Pre-Marked Rolls|