|
The BS-330SA is a metal cutting band saw capable of cutting 13" OD and
is the perfect semi automatic band saw for cutting at 90 degrees or single miter
angles. This saw can cut up to 13" x 18½" material, meaning you get more value
for your investment than with any other saw on the market. Quick releases allow
the operator to change the miter angle in seconds. Each gear driven metal
cutting bandsaw we offer has variable speed, miter heads, and a hydraulic
controlled descent devise for perfect feeds and longer blade life. The vise uses
a hydraulic clamping system and after the cut is complete the blade stops, the
vise opens and the head lifts to the start position for the next piece to be
cut. Our band saws are constructed of a heavy cast iron saw head and base and
the blades are guided via a tungsten carbide insert offering rigidity and
accuracy. Each band saw has a powerful coolant system and a broken blade
tensioning devise that shuts down the machine if the blade breaks. |
The BS-330SA metal band saw has a hydraulic descent for larger production
runs that increases blade life and reduces operator fatigue. It has a hydraulic
descent control device for the down feed, that is reset when the head is
automatically lifted. This metal bandsaw series can cut up to 13" OD capacities.
This series of band saw requires 220V, Three Phase, 60 Hertz. The BS-330SA semi
automatic horizontal bandsaw has a miter saw head that can cut from 90 to 45
degrees. This series of horizontal band saw comes standard with a variable speed
drive allowing the operator to fine tune the blade speed from 114' to 262' /
min. The BS-330SA metal cutting saw series requires a 1-1/4" wide saw blade by
.042" wall thickness, making this series a very precise miter saw. These band
saws offer more cutting capacity in a variable speed miter saw than any other
saw on the market, for the investment. Baileigh Industrial provides quality
bandsaws at an exceptional value |
