Benner-Nawman Rebar Benders at

HB-16W

DBR-25WH

The HB-16W portable heavy-duty electric/hydraulic rebar bender helps save valuable man-hours by bending rebar up to 5/8” (#5) grade 60 from 0-135 degrees in-place at the job site. Other features include a double insulated electric motor and a removable bending guide for repeating the same angle bend. The optional 90 degree bending shoe and collar make it simple to repeat 90 degree bends without a guide. The optional bending collar increases the bending radius and minimizes rebar breakage, especially on #5 grade 60. This portable electric/ hydraulic rebar bender ships complete in a steel carrying case with hydraulic oil and a tool kit. Solves bending applications other tools can’t even attempt.

The DBR-25WH is a portable heavy-duty electric/hydraulic rebar bender and straightener. It helps save valuable man-hours by cleanly and efficiently bending or straightening bent rebar. It functions as a simple 90-degree portable electric rebar bender. The interchangeable bending hook covers rebar diameters from #4 to #8 grade 60. Maximum pressure for bending and straightening ranges from 8.5 to 11 tons. It’s portable and versatile enough to bend or straighten rebar in-place with its push/pull hydraulic capabilities. It will bend a 90-degree angle in only (4) seconds. The bending head also rotates 360 degrees. Ships complete in a wooden carrying case with hydraulic oil and a tool kit. Solves bending applications other tools can’t even attempt.

Specifications

Maximum Bending Diameter

5/8” #5 Rebar (16mm) - Grade 60

Bending Angle

0 - 135 degrees / 8 Seconds

Bending Speed

115V 50/60Hz / 10 amps

Power Supply

33 lbs (15 kg)

Weight

22.8” (585mm) x 7.6” (195mm) x 8” (205mm)

Click here for product specification sheet

Specifications

Maximum Bending Diameter

1” #8 Rebar (25mm) Grade 60

Bending Angle

Up to 94 degrees (1/2”) - up to 90 degrees ( 1”)

Bending Speed

115V 50/60Hz / 12 amps

Power Supply

57.3 lbs (26 kg)

Weight

25.75” (660mm) x 10.5” (270mm) x 7.8” (200mm)

Click here for product specification sheet

DBD-16X

DBD-20X

The DBD-16X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #5 (5/8”) grade 60 at the job site or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The dial-type angle selector can be set to accurately bend any angle from 0-180 degrees. Bends (3) each #3 rebar or (2) each #4 rebar or (1) each #5 rebar at one time. An emergency stop switch and two side lifting handles are standard features. Ships complete with set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control switch for hands-free bending

The DBD-20X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #6 (3/4”) grade 60 at the job site or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The dial-type angle selector can be set to accurately bend any angle from 0-180 degrees. An emergency stop switch and two side lifting handles are standard features. The DBD-20X portable rebar bender comes complete with set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control switch for hands-free bending

Specifications

Maximum Bending Diameter

5/8” (#5) Rebar (16mm) Grade 60

Bending Angle

Up to 180 degrees / 5 seconds

Bending Speed

115V 50/60Hz / 10 amps

Power Supply

90 lbs (40.8 kg)

Weight

16.6” (425mm) x 12.5” (320mm) x 16.2” (415mm)

Click here for product specification sheet

Specifications

Maximum Bending Diameter

3/4” (#6) Rebar (19mm) Grade 60

Bending Angle

Up to 180 degrees / 7 seconds

Bending Speed

115V 50/60Hz / 15 amps

Power Supply

134.5 lbs (61 kg)

Weight

16.4” (420mm) x 18” (462mm) x 16.2” (415mm)

Click here for product specification sheet

DBD-25X

DBD-32X

The DBD-25X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #7 (7/8”) grade 60 at the job site or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The lever-type angle selector can be set to accurately bend any angle from 0-180 degrees. An emergency stop switch and two lifting handles are standard features. The DBD-25X portable rebar bender comes complete with a set of (6) bending rollers in a steel carrying case, a tool kit, a bender cover, and a standard foot pedal control switch for hands-free bending. Optional stands, circular pattern rollers, and a highway trailer unit are available

The DBD-32X is a heavy-duty portable table-type bender. This unit is the largest 115 volt portable rebar bender available. This powerful electrically driven mechanical unit will easily bend 1-1/8” Grade 60 rebar 180 degrees in only 8 seconds. This fast and accurate bender is a valuable tool for small to medium size production shops. It comes standard with a hands-free foot pedal control switch and a complete bending radius roller set. This unit is available separately or in combination with a cutter mounted on a skid, stand or trailer unit. An optional stand is also available

Specifications

Maximum Bending Diameter

7/8” (#7) Rebar (22mm) Grade 60

Bending Angle

Up to 180 degrees / 6 seconds

Bending Speed

115V 50/60Hz / 12 amps

Power Supply

190 lbs (86 kg)

Weight

19” (490mm) x 21.5” (550mm) x 17.2” (440mm)

Click here for product specification sheet

Specifications

Maximum Bending Diameter

1-1/8” (#9) Rebar (29mm) Grade 60

Bending Angle

Up to 180 degrees / 8 seconds

Bending Speed

115V 50/60Hz / 12 amps

Power Supply

397 lbs (180 kg)

Weight

23” (590mm) x 24.2” (620mm) x 18.7” (480mm)

Click here for product specification sheet

DBD-25H

This heavy-duty portable bender helps to save valuable man-hours by effortlessly bending rebar up to #8 (1") Grade 60 at job sites or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The lever-type angle selector can be set to accurately bend any angle from 0-180 degrees. Bends (4) each #3 rebar, (3) each #4, (2) each #5 or #6 rebar and (1) #7 or #8 rebar at one time. The roller chart makes it easy to select the correct combination of rollers to achieve an inside bending diameter of six times the rebar diameter. An emergency stop switch and two lifting handles are standard features. The DBD-25H portable rebar bender comes complete with (9) bending rollers in two steel carrying cases, a tool kit, a bender cover, and a standard foot pedal control switch for hands-free bending. Optional circular pattern bending rollers are available. Benner-Nawman backs it with a one-year warranty

Specifications

Maximum Bending Diameter

#8 (1") (25mm) Grade 60

Bending Angle

0 – 180 degrees

Bending Speed

9 Seconds for 180 degree bend

Power Supply

115V 50/60Hz -15 amps

Weight

210 lbs. (95 kg)

Click here for product specification sheet