Shown with optimal dust collector and fume exhauster
|
20"-22" Dry Cut Mitering Saws Complete with 10 or 20 HP TEFC motor,
magnetic starter with 110 volt at the pushbuttons, cabinet base, air-operated
chain hold-down vise;
up to 60° right of center
Fast, Low Cost Cutting of Hardened Tool Steel,
Drills, Reamers,
Bars, Pipe, Angle Iron, Tubing, Flat Stock & Rod.
Capacity: 90° 3" solid • 6" Most Shapes •
30°-45°—2.5" Most Solids • 4" Most Shapes
Cutting Head swivels 60° right of center.
Indicators for 15°, 30°, and 45°. Cutting head and pedestal are mounted on a
rugged swing arm secured in lubricated-for-life bearings. Lock to hold desired
angle is quick and easy to operate.
Use a steel blade to cut plastic, and with
an oil mist spray to cut aluminum, copper and nonferrous material
|
|
Specifications |
| Wheel
Capacity |
20" or 22"
diameter |
| Motor |
10 or 20 HP
Special Hi-Torque, 3 Phase |
| Starter |
Magnetic
with thermal overload; 110 volt at the pushbuttons |
| Spindle
Bearings |
Heavy-duty
sealed ball bearings. Lubricated for life |
| Arbor
Shaft |
1" |
| Drive |
Multiple
“V” belt, raw-edge sure grip, stretch resistant |
| Safety
Guards |
Cut-off
wheel and guards exceed safety code requirements |
| Stop |
Adjustable
down stop limits depth of chop stroke |
| Vise |
Air-operated chain hold-down vise |
|
Hydraulic Power Head |
(PH
models only) with hydraulic feed control valve for smooth
accurate cutting |
| Wheel
Wear Compensator |
(WWC &
PH models only) senses end of cut, returns
wheel to up position. |
|
Oscillation |
(OSC
models only) For improved cutting, reduced burr and longer wheel life;
Oscillator: 1/3 HP gear motor |
|
Shipping Weight |
650-1600
lbs |
|
Options/Accessories |
|
Product # |
Description |
| 209002 |
Dust
Collector Fume Exhauster |
| 209020 |
Miter Hood |
| 209403 |
Outboard
Support |
| 209404 |
24" Air
Operated Work Length Gage |
| 209502 |
Oil Mist
Spray (Nonferrous Cutting) |
|
Note: Work Length Gage automatically swings up out of the
way when the part is cut |
Everett Dry Cut Abrasive Blades |
|
Cutting Speeds (average) |
|
Size |
Material
|
Time |
|
2" (90°) |
Steel Pipe |
5 sec. |
|
4" (90°) |
Steel
Channel |
10 sec. |
|
2" (45°) |
Steel Pipe |
8 sec. |
|
1" (45°) |
Cold Rolled Steel |
3 sec. |
|
20"-22" Mitering Machines (Up to 60°
Right of Center) 20 HP
|
|
Product # |
Description |
| 200162 |
20"-22" MIT
20HP 208 Volt 3Ø Mag Starter |
| 200163
|
20"-22" MIT
20HP 230 Volt 3Ø Mag Starter |
| 200165
|
20"-22" MIT
20HP 440 Volt 3Ø Mag Starter |
|
20"-22" Mitering Machines (Up to 60°
Right of Center)
20 HP Mitering
Hydraulic Power Head Models (PH) |
|
Product # |
Description |
| 202162
|
20"-22" MIT
PH 20HP 208 Volt 3 |
| 202163
|
20"-22" MIT
PH 20HP 230 Volt 3 |
| 202165 |
20"-22" MIT
PH 20HP 440 Volt 3Ø |
|
20"-22" Machines (Up to 60° Right of
Center)
20 HP Mitering Hydraulic
Power Head Models (PH)
with patented Wheel Wear Compensator (WWC) |
|
Product # |
Description |
| 204162 |
20"-22" MIT
PH WWC 20HP 208 Volt 3Ø |
| 04163
|
20"-22" MIT
PH WWC 20HP 230 Volt 3Ø |
| 204165 |
20"-22" MIT
PH WWC 20HP 440 Volt 3Ø |
|
20"-22" Mitering Machines (Up to 60°
Right of Center)
20 HP Mitering
Models with patented Oscillation (OSC): |
|
Product # |
Description |
| 200362
|
20"-22" MIT
OSC 20HP 208 Volt 3Ø Mag Starter |
| 200363
|
20"-22" MIT
OSC 20HP 230 Volt 3Ø Mag Starter |
| 200365
|
20"-22" MIT
OSC 20HP 440 Volt 3Ø Mag Starter |
|
20"-22" Mitering Machines (Up to 60°
Right of Center)
20 HP Mitering
Hydraulic Power Head Models (PH) with patented Oscillation (OSC):
|
|
Product # |
Description |
| 202362
|
20"-22" MIT
PH OSC 20HP 208 Volt 3Ø |
| 202363
|
20"-22"
MIT PH OSC 20HP 230 Volt 3Ø |
| 202365
|
20"-22" MIT
PH OSC 20HP 440 Volt 3Ø |
|
20"-22" Mitering Machines (Up to 60°
Right of Center) 20 HP Mitering
Hydraulic Power Head Models (PH) with patented Wheel Wear Compensator (WWC)
Oscillation |
|
Product # |
Description |
| 204362
|
20"-22" MIT
PH WWC OSC 20HP 208 Volt 3Ø |
| 204363
|
20"-22" MIT
PH WWC OSC 20HP 230 Volt 3Ø |
| 204365
|
20"-22" MIT
PH WWC OSC 20HP 440 Volt 3Ø |
|
|
|
