chat now with southern tool
Chat Now!
Call 1-800-458-3687
Monday - Friday 8:00 AM- 7:00 PM ET

 

Save 10% on Select  jet metalworking machinery logo Metalworking Machines
Free Freight on ALL
Jet and Wilton Metalworking and Metalforming Machines.

Hud-Son Oscar Portable Bandsaw Mills

 

Oscar 121 - 21" Portable Sawmill
oscar 121 Oscar 121
 
Oscar 328 - 28" Portable Sawmill
oscar 121 Oscar 121
 
Oscar 236 - 36" Portable Sawmill
OSCAR 236 OSCAR 236
OSCAR 236 OSCAR 236
 

 

usa.jpg

OSCAR 121

By far the most portable band saw mill that can perform as well as larger sawmills. This bandmill is so portable that most ATV 4 wheelers can tow them almost anywhere. Why buy a used portable saw mill when you can get a brand new mill for a great price.

Oscar 121 comes standard with a 10HP engine, cuts 21" diameter logs, Hud-Son guides and has 2 six foot ground tracks. Also a towable trailer is available for off road or deep woods milling. This will totally out perform chain saw mills with the narrow kerf cut. The Hud-Son thin kerf band mill blades save lumber and you get a smoother finish.

Estimated Weight (lbs): complete unit: 435 lbs

  • 21" Maximum Diameter Log Capability
  • 2-6' Ground Tracks w/log dog assembly (12' Total)
  • Manual Start 10 HP Overhead Valve Engine
  • Hand Crank Height Adjustment
  • 16" Diameter Band Wheels with Pyrathane Belt
  • Powder Coat Finish
  • Hud-Son Shoe Guides
  • Centrifugal Clutch
  • Standard Hud-Son Band Blade
  • Hud-Son Double Support Bandwheel System with 1 1/2" Pillow Block Bearings
  • Hud-Son Guides
  • Lube Tank
Oscar 121 - 21" Portable Sawmill
OSC121G Oscar-121 - 21" Capacity (Log Diameter) - 10hp Gas Engine
WM132 Bandmill Blade - WM132 Bladesaw Blade
TRK6 6 Fool Track Extension

 

flag

OSCAR 328

The Oscar 328 Bandmill will accept 28" diameter logs with 12' of 2" angle iron track and is very affordable. It will even fit in the back of a short box pick-up truck! This model has a 10 HP motor. Also a trailer is available for off road or deep woods towing. Optional electric model available. Includes a 5 hp 230 volt single phase motor. Options include 6 foot  track extensions w/log dog assembly, bandmill blades WM132, and a RPM & hour meter.

The Oscar 328 Bandmill is the new addition to the Hud-son line of sawmills.  It will accept 28 inch diameter logs with 12ft of 2inch angle iron track for an affordable price.  It will even fit in the back of a short box pick-up truck! This model has a 10 HP Briggs and Stratton motor.

  • 28" Maximum Diameter Log Capability
  • 12' Ground Tracks w/log dog assembly
  • Manual Start 10 HP Overhead Valve Engine
  • Hand Crank Height Adjustment
  • 16" Diameter Band Wheels with Pyrathane Belt
  • Powder Coat Finish
  • Centrifugal Clutch
  • Standard Hud-Son Band Blade
  • Hud-Son Double Support Bandwheel System with 1 1/2" Pillow Block Bearings
  • Bottom Board 1" Capability
  • Hud-Son Shoe Guides
  • Outside Guards
  • Center Guards
  • Lube Tank

Oscar 328 - 28" Portable Sawmill
OSC328G Oscar 328  28" Capacity (Log Diameter) - Complete 28'' Unit 10 HP
OSC328E Oscar 328E -  28" Capacity (Log Diameter) - 5hp Electric Motor 220V/1Ph
WM132 Bandmill Blade - WM132 Bladesaw Blade 
TRK6 6 Foot Track Extension

 

flag

OSCAR 236

This sawmill is Hud-Son's best selling unit with many features offered by larger mills at a great price. The Oscar 236 makes quick work of any log-to-lumber needs using a 12 volt winch to control the height of the sawmill head. Oscar 36" also features a 16 HP V-Twin Overhead Valve Motor, allowing you to slice through any wood up to 36" in diameter. Oscar 236 is available in the ground track unit or complete unit with a towable trailer.

  • 36" Diameter Log Capability
  • 2 - 7' Ground Tracks log dog assembly
  • 16 Hp V Twin
  • Briggs & Stratton Overhead Valve Engine
  • Four Post System 1.5" Square Tube Steel Frame
  • Electric Start
  • Built in Lubrication Tank also functions as a Cross Support
  • Electric Power Height Adjustment in 1/16" Increments
  • Vibration Reducing Pyrathane Bandwheel Belting
  • Hud-Son Guides
  • Botton Board 1" Capability
  • DoubleHard Hud-Son Saw Blades
  • Centrifugual Clutch
  • Powder Coat Finish
Oscar 236 - 36" Portable Sawmill
OSC236G-16 Oscar 236 - 36" Capacity (Log Diameter) - 16HP Standard Ground Track Unit, 14'- 2 piece track
OSC236G-23 Oscar 236 - 36" Capacity (Log Diameter) - 23HP Standard Ground Track Unit, 14'- 2 piece track
OSC236GT-16 Oscar 236 - 36" Capacity (Log Diameter) - 16 HP 20' trailer unit
OSC236GT-23 Oscar 236 - 36" Capacity (Log Diameter) - 23 HP 20' trailer unit
WM167 Bandmill Blade - WM167 Bladesaw Blade
TRK7 7 Foot Track Extension

 

Why buy a Hud-Son Portable Sawmill?
- Top ten reasons why a Hud-son is the right choice

  1. DESIGN

    Hud-Son uses a 4-Post head design. This allows for more head stability & reduces the chance for “sag” or “uneven” cuts. With an inner H-frame bearing support system, this applies less stress on the bearings & drive shafts. The H-frame uses no “camber” in the wheels for tracking. Camber causes unnecessary stress which leads to early bearing & shaft fatigue (see photo).

  2. SERVICE

    WHEN NEEDED, IT IS SIMPLE. EASY ACCESS TO ALL THE BEARINGS, SHAFTS AND BELTS MAKE ADJUSTMENTS AND SERVICE SIMPLE. BLADE CHANGES ARE EASY, NO REALIGNING OR ADJUSTMENTS TO MAKE.

  3. BLADE GUIDES

    HUD-SON USES THEIR VERY OWN GUIDES. WITH SUPPORT ON THE TOP, BOTTOM AND BACK OF THE BLADE, WHERE CAN IT GO? OUR GUIDES LIMIT THE CHANCE OF BLADE WANDER. THE LOWER SUPPORT HOLDS THE BLADE UP AND DECREASES THE CHANCE OF "DIVING", WHILE MOST COMPANIES USE ONLY TOP SUPPORT. YES, WE DO SELL OUR GUIDES SEPARATELY.

  4. VALUE

    COMPARE, THERE IS NO OTHER MILL ON THE MARKET THAT HAS STANDARD FEATURES FOR THE PRICE OF A HUD-SON. NO ONE.

  5. PAINT

    WE CARE THAT YOU ARE COMPLETELY SATISFIED WITH YOUR RECENT PURCHASE. WE POWDER COAT ALL OUR SAWMILLS, POWDER COATING IS DURABLE JUST LIKE YOUR HUD-SON! EACH PART IS CAREFULLY PREPARED AND COATED TO KEEP YOUR NEWEST INVESTMENT LOOKING LIKE IT, FOR YEARS TO COME.

  6. QUALITY ASSURED

    EVERY SINGLE UNIT PASSES A VIGOROUS 28 POINT INSPECTION. EACH SAWMILL IS TESTED WITH WOOD, NOT JUST VISUALLY LOOKED AT. IT IS NOT EASY TO EARN THE RIGHT TO WEAR THE HUD-SON LABEL.

  7. AVAILABILITY

    HUD-SON SAWMILLS ARE ALL MANUFACTURED AT OUR FACILITY IN BARNEVELD, NY. OUR SAWMILLS ARE AVAILABLE AT OVER 40 LOCATIONS THROUGHOUT THE U.S., CANADA AND EUROPE. THIS BRINGS SERVICE AND AVAILABILITY CLOSER TO YOU.

  8. WARRANTY

    ALL OUR MILLS, SMALL TO LARGE HAVE 2 YEAR LIMITED WARRANTIES. WE STAND BEHIND OUR PRODUCTS. WE DO NOT HIDE BEHIND THE SMALL PRINT.

  9. DRIVE LINE

    ALL OUR BANDWHEELS FROM 16" - 30" IN SIZE HAVE TIGHT FITTING LATHE CUT PYRATHANE BELTING. THIS COMPLETES THE MATCH AND BALANCE WITH THE WHEEL, BELT, BEARINGS AND SHAFTS. THIS REMOVES THE VIBRATION MILLS WITH "LOOSE BELTS" HAVE AND IMPROVES THE QUALITY OF YOUR CUT.

  10. PORTABILITY

    ALL HUD-SON MILLS ARE PORTABLE, SOME WITH A 4 WHEELER OR GOLF CART, SOME WITH A PICK UP TRUCK, SOME EVEN TWO GUYS CAN CARRY.

    HUD-SON HAS THE ONLY "MILL TO GO" ON THE MARKET. HUD-SON DESIGNS THEIR MILLS WITH YOU THE CUSTOMER IN MIND. WE KNOW THAT YOUR MILL NEEDS TO GO TO CAMP, HOME OR EVEN TO WORK WITH YOU. HUD-SON MILLS WILL MAKE THE TRIP.

HUDOSC121G mfg. item #: OSC121G
$3799.00    
OSCAR-121 - 21 IN CAPACITY (LOG DIAMETER) - 10HP GAS ENGINE
lease to own for as little as:$76 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDOSC328G mfg. item #: OSC328G
$4399.00    
OSCAR 328 28 IN CAPACITY (LOG DIAMETER) - COMPLETE 28 FT FT UNIT 10 HP
lease to own for as little as:$88 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDOSC328E mfg. item #: OSC328E
$4799.00    
OSCAR 328E - 28 IN CAPACITY (LOG DIAMETER) - 5HP ELECTRIC MOTOR 220V/1PH
lease to own for as little as:$96 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDWM132 mfg. item #: WM132
$43.51    
WM132 BLADE FOR O-328
  314
FREE shipping when ordered with a machine from this manufacturer.20


HUDTRK6 mfg. item #: TRK6
$405.00    
6 FOOT TRACK EXTENSION
  314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDOSC236G-16 mfg. item #: OSC236G-16
$7099.00    
OSCAR 236 - 36 IN CAPACITY (LOG DIAMETER) - 16HP STANDARD GROUND TRACK UNIT, 14 FT - 2 PIECE TRACK
lease to own for as little as:$142 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDOSC236G-23 mfg. item #: OSC236G-23
$7399.00    
OSCAR 236 - 36 IN CAPACITY (LOG DIAMETER) - 23HP STANDARD GROUND TRACK UNIT, 14 FT - 2 PIECE TRACK
lease to own for as little as:$148 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDOSC236GT-16 mfg. item #: OSC236GT-16
$9649.00    
OSCAR 236 - 36 IN CAPACITY (LOG DIAMETER) - 16 HP 20 FT TRAILER UNIT
lease to own for as little as:$193 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDOSC236GT-23 mfg. item #: OSC236GT-23
$9949.00    
OSCAR 236 - 36 IN CAPACITY (LOG DIAMETER) - 23 HP 20 FT TRAILER UNIT
lease to own for as little as:$199 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1


HUDWM167 mfg. item #: WM167
$47.03    
WM167 BLADE FOR O-330
  314
FREE shipping when ordered with a machine from this manufacturer.20


HUDTRK7 mfg. item #: TRK7
$560.00    
7 FOOT TRACK EXTENSION
lease to own for as little as:$11 per month! 314
Call for freight quote on this item or we will confirm freight charges before shipping.1



  • Hours: Monday - Friday
    8:00 AM to 7:00 pm Eastern
  • Toll Free: 1-800-458-3687
    786-866-9865

  • Fax: 865-376-9792
  • American Express American Express American Express
  •  
Copyright © 2014 Smith-Hamilton, Inc
0.006 2053 10:46:10