chat now with southern tool
Technical Sales 1–800–458–3687

Hud-Son Specialty and Hydraulic Sawmills

Oscar-52-23 Oscar 52 Portable Sawmillflag

OSCAR 52 Pro Portable Sawmill

The Oscar 52 inch is only available with ground track due to the width exceeding D.O.T. regulations. Hud-Son's sawmills are currently being used in many unique applications including paper mills, log home building, and furniture making. Hud-Son is singular in our ability to handle oversized wood or crooked wood, making 52 inch  mills to meet your needs. The 23 HP V-twin engine is standard.

Standard features include:

  • 52 inch log capacity
  • gas or diesel engines available in a variety of horse power
  • electric start
  • Centrifugal clutch
  • 1.5 inch band wheel bearings
  • 25 inch band wheels
  • 12 V winch power head adjustment system
  • dual measuring system with quarter scale and standard inches or metric
  • blade lubrication system
  • extra heavy duty carriage head
  • four post system with 2 inch square tube
  • 5.5 inch Centrifugal dual belt drive clutch and drive pulley
  • bandblade lubrication tank
  • powder coat finish
  • double hard Hud-Son bandblades
  • Standard industrial with Carter blade guides
  • 3 adjustable log dogs

The Oscar 52 sawmill  mill is available with a variable speed dual sided power drive wheel  feed system driven with a heavy duty 12 volt motor. Call for pricing on diesel models

Oscar 52 Bandsaw Mill
OSC52-23 52 in Oscar cutting head w/ 23HP gas engine with electric start engine and 3X Ground Tracks
OSC52-35 52 in  Oscar cutting head w/35HP gas engine with electric start engine and 3X Ground Tracks
OSC52-40 52 in  Oscar cutting head w/40HP gas engine with electric start engine  and 3X Ground Tracks

 

OSC60-34D Oscar 60 Portable Sawmillflag

OSCAR 60 Portable Sawmill

This type of wood can be turned into valuable lumber with the Hud-Son 60 sawmill , table tops and bar tops. The Hud-Son 60 custom made sawmill comes optional with a 34 HP diesel engine, call for pricing or a Subaru 40 HP  gasoline engine.  30 inch  band wheels, 5.5 inch Centrifugal dual belt drive clutch and drive pulley, 1 15/16 inch shafts and  pillow block bearings on drive and driven band wheels, 56 inch max cut between guides, 40 inch maximum cut height, and a 28 inch depth of cut. Comes with a 20 ft heavy duty 3x6 inch box beam ground track system with log dogs and adjustable support legs, heavy duty 12V winch for raising and lowering the head, blade lubrication system, 2 inch square tubing frame with large structural gussets, dual measuring system 4, 5, 6, 8, quarter scale and standard 1 inch scale.  This mill has a durable long lasting baked on powder coat finish.

The Oscar 60 mill comes standard with a variable speed  dual sided power drive wheel  feed system driven with a heavy duty 12 volt motor. 

This wood can be turned into valuable lumber, table tops and bar tops. The Hud-Son 60” sawmill comes with a 34 HP diesel engine. Freight FOB from Barneveld, NY 13304.

Features:

  • 20 ft track and dual powerfeed
  • 30 inch band wheels
  • 5.5 inch centrifugal dual belt drive clutch and drive pulley
  • 1.5 inch pillow block bearings on drive and driven band wheels
  • 56 inch between guides
  • 42 inch maximum cut height, and a 28 inch depth of cut
  • Comes with 20 ft heavy duty 3x6 inch box beam ground track system with log dogs and adjustable support legs
  • Carter blade guides
  • 12V winch for raising and lowering the head
  • large blade lubrication tank
  • 2 inch square tubing frame with large structural gussets
  • dual measuring system 4, 5, 6, 8, quarter scale and standard 1 inch scale
  • This mill also has a durable powder coat finish.
Oscar 60 Bandsaw Mill
OSC60-34D 60 in  Oscar cutting head w/34HP diesel enging with Electric Start and 20' Track, ** Dual Powerfeed

 

FarmBoss-23 Farm Boss 36 Portable Sawmillflag

Farm Boss 36 Portable Sawmill

 Within 10 minutes of arrival youre ready to cut lumber. The 2x2 inch steel 4-post frame is extra heavy duty and rugged for long term dependability. Equipped with an electric powered winch for touch of a button height adjustment makes this sawmill user friendly and ready to cut on the spot. Whether towing or around the farm, the Farm Boss is sure to meet your needs Available options include 31 HP V-twin and 34 HP diesel, call for pricing on diesel models,  larger (5.5 gallon) lube tank, 12 V power feed w/adjustable speed control forward and reverse, trailer extension per foot, 12 volt cable operated log loader and turner w/ramps, 25 inch  bandwheels, (upgrade) extra log dog assembly, bandmill blade WM167, optional electric brake axle, and a RPM and hour meter gas model

Features include 3

  • 36 inch Diameter Log Capacity
  • 24 ft bed 3x6 box beam Trailer System
  • 23 HP V-Twin Overhead Valve Engine
  • Turnkey Electric Start
  • Steel Lubrication Tank
  • Electric Blade Height Adjustment At The 1/16th Inch Level
  • 19 inch Bandwheels
  • Fenders (set of two) with light kit
  • Heavy Duty Head Construction 2 inch Tubular Steel Framing
  • Refined Style Log Dogs
  • Hud-Son Guides
  • Bottom Board 1 inch Capability
  • Strategic Peavey Anchor Points Designed In Bed
  • Powder Coat Finish - NEW
  • Built ready to accept power feed
Oscar FARM BOSS 36 - 36 inch Profssional Potable Bandsaw Mill
OSCFB36-21 Oscar Farm Boss 36 - 36 inch Diameter Log Capacity - 23hp Gas
WM167 Bandmill Blade - WM167 Bladesaw Blade

 

H360-23 H360 Hydraulic Portable Sawmillusa.jpg

H 360 Hydraulic Portable Sawmill

It comes with a 23 hp engine, adjustable power feed, a hydraulic log loader, and hydraulic log turner. The clamping of log, and back stop adjustments are done manually. Freight FOB Barneveld, NY 13304.

Optional Upgrades Available:

  • 31 HP Engine,  power log dogs and backstops - Call for pricing

Features include

  • 36 inch diameter log capacity, accepts logs up to 18 ft long
  • 23 HP engine electric start
  • 3 adjustable log dogs squaring pins
  • 24 ft bed 3x6 box beam trailer with cross supports
  • light kit for road, travel, fenders, and brake axle
  • 6 adjustable support legs
  • extra large lube tank
  • centrifugal clutch
  • extra heavy duty carriage head
  • four post system with 2 inch square tube
  • 12V winch powers height adjustment
  • standard industrial 1.5 inch pillow block bearing on drive and driven bandwheels
  • 19 inch diameter bandwheels
  • Hud-Son bandmill blades
  • powder coat finish
  • standard with Hud-Son shoe guides
  • dual measuring system: 4, 5, 6 and 8 quarter scale and standard 1 inch with 1/16 inch scale
  • hydraulic log loader
  • hydraulic log turner, and a 12 volt power feed
H 360 portable Sawmill
OSC360HD-23 24' Trailer with Oscar H360 Hydraulic - 36in Diameter Log Capacity - 23 HP Gas
OSC360HD-35 24' Trailer with Oscar H360 Hydraulic - 36in Diameter Log Capacity - 35HP Gas
OSC360HD-40 24' Trailer with Oscar H360 Hydraulic - 36in Diameter Log Capacity - 40 HP Gas

Call 800-458-3687 for pricing on the Deisel option

Hydraulic Accessories & Options
LKP  Light Kit Premium Rear Leg Mount  - Sawmill Options
LKM  Light Kit Magnet Mount  - Sawmill Options
RPM  RPM and Hour Meter  - Sawmill Options
LTS-5  Large Bolt On Lube Tank System  - Sawmill Options
MFL  Muffler U[grade Kit, Low Noise  - Sawmill Options
DB1  Hud-Son Chainsaw Debarker Attachment  - Sawmill Options
WM167  Replacement Band Blade for 330, 236, H360, FB.  - Sawmill Options
WM221-1.5  Replacement Band Blade for the 52, FB.  - Sawmill Options

 

Why buy a Hud-Son Portable Sawmill?
- Top ten reasons why a Hud-son is the right choice

  1. DESIGN

    Hud-Son uses a 4-Post head design. This allows for more head stability and reduces the chance for sag or uneven cuts. With an inner H-frame bearing support system, this applies less stress on the bearings and drive shafts. The H-frame uses no camber in the wheels for tracking. Camber causes unnecessary stress which leads to early bearing and shaft fatigue (see photo).

  2. SERVICE

    WHEN NEEDED, IT IS SIMPLE. EASY ACCESS TO ALL THE BEARINGS, SHAFTS AND BELTS MAKE ADJUSTMENTS AND SERVICE SIMPLE. BLADE CHANGES ARE EASY, NO REALIGNING OR ADJUSTMENTS TO MAKE.

  3. BLADE GUIDES

    HUD-SON USES THEIR VERY OWN GUIDES. WITH SUPPORT ON THE TOP, BOTTOM AND BACK OF THE BLADE, WHERE CAN IT GO? OUR GUIDES LIMIT THE CHANCE OF BLADE WANDER. THE LOWER SUPPORT HOLDS THE BLADE UP AND DECREASES THE CHANCE OF DIVING WHILE MOST COMPANIES USE ONLY TOP SUPPORT. YES, WE DO SELL OUR GUIDES SEPARATELY.

  4. VALUE

    COMPARE, THERE IS NO OTHER MILL ON THE MARKET THAT HAS STANDARD FEATURES FOR THE PRICE OF A HUD-SON. NO ONE.

  5. PAINT

    WE CARE THAT YOU ARE COMPLETELY SATISFIED WITH YOUR RECENT PURCHASE. WE POWDER COAT ALL OUR SAWMILLS, POWDER COATING IS DURABLE JUST LIKE YOUR HUD-SON! EACH PART IS CAREFULLY PREPARED AND COATED TO KEEP YOUR NEWEST INVESTMENT LOOKING LIKE IT, FOR YEARS TO COME.

  6. QUALITY ASSURED

    EVERY SINGLE UNIT PASSES A VIGOROUS 28 POINT INSPECTION. EACH SAWMILL IS TESTED WITH WOOD, NOT JUST VISUALLY LOOKED AT. IT IS NOT EASY TO EARN THE RIGHT TO WEAR THE HUD-SON LABEL.

  7. AVAILABILITY

    HUD-SON SAWMILLS ARE ALL MANUFACTURED AT OUR FACILITY IN BARNEVELD, NY. OUR SAWMILLS ARE AVAILABLE AT OVER 40 LOCATIONS THROUGHOUT THE U.S., CANADA AND EUROPE. THIS BRINGS SERVICE AND AVAILABILITY CLOSER TO YOU.

  8. WARRANTY

    ALL OUR MILLS, SMALL TO LARGE HAVE 2 YEAR LIMITED WARRANTIES. WE STAND BEHIND OUR PRODUCTS. WE DO NOT HIDE BEHIND THE SMALL PRINT.

  9. DRIVE LINE

    ALL OUR BANDWHEELS FROM 16 - 30 inch IN SIZE HAVE TIGHT FITTING LATHE CUT PYRATHANE BELTING. THIS COMPLETES THE MATCH AND BALANCE WITH THE WHEEL, BELT, BEARINGS AND SHAFTS. THIS REMOVES THE VIBRATION MILLS WITH LOOSE BELTS HAVE AND IMPROVES THE QUALITY OF YOUR CUT.

  10. PORTABILITY

    ALL HUD-SON MILLS ARE PORTABLE, SOME WITH A 4 WHEELER OR GOLF CART, SOME WITH A PICK UP TRUCK, SOME EVEN TWO GUYS CAN CARRY.

    HUD-SON HAS THE ONLY MILL TO GO ON THE MARKET. HUD-SON DESIGNS THEIR MILLS WITH YOU THE CUSTOMER IN MIND. WE KNOW THAT YOUR MILL NEEDS TO GO TO CAMP, HOME OR EVEN TO WORK WITH YOU. HUD-SON MILLS WILL MAKE THE TRIP.

OSC52-23
52 IN OSCAR CUTTING HEAD W/ 23HP GAS ENGINE WITH ELECTRIC START ENGINE & 3X GROUND TRACKS
Mfg. item #: OSC52-23
HUDOSC52-23
lease to own for as little as:$350 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$17,495.00

167
OSC52-35
52 IN OSCAR CUTTING HEAD W/35HP GAS ENGINE WITH ELECTRIC START ENGINE & 3X GROUND TRACKS
Mfg. item #: OSC52-35
HUDOSC52-35
lease to own for as little as:$370 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$18,495.00

167
OSC52-40
52 IN OSCAR CUTTING HEAD W/40HP GAS ENGINE WITH ELECTRIC START ENGINE & 3X GROUND TRACKS
Mfg. item #: OSC52-40
HUDOSC52-40
lease to own for as little as:$388 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$19,395.00

167
OSC60-34D
60 IN OSCAR CUTTING HEAD W/34HP DIESEL ENGING WITH ELECTRIC START & 20 TRACK, ** DUAL POWERFEED
Mfg. item #: OSC60-34D
HUDOSC60-34D
lease to own for as little as:$860 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$43,000.00

167
OSCFB36-21
CALL 1-800-458-3687 FOR PRICING ON THIS ITEM
Mfg. item #: OSCFB36-21
HUDOSCFB36-21
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

167
WM167
Mfg. item #: WM167
HUDWM167
FREE shipping when ordered with a machine from this manufacturer.20
$37.04

167
OSC360HD-23
24 TRAILER WITH OSCAR H360 HYDRAULIC - 36IN DIAMETER LOG CAPACITY - 23 HP GAS
Mfg. item #: OSC360HD-23
HUDOSC360HD-23
lease to own for as little as:$392 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$19,595.00

167
OSC360HD-35
24 TRAILER WITH OSCAR H360 HYDRAULIC - 36IN DIAMETER LOG CAPACITY - 35HP GAS
Mfg. item #: OSC360HD-35
HUDOSC360HD-35
lease to own for as little as:$412 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$20,595.00

167
OSC360HD-40
24 TRAILER WITH OSCAR H360 HYDRAULIC - 36IN DIAMETER LOG CAPACITY - 40 HP GAS
Mfg. item #: OSC360HD-40
HUDOSC360HD-40
lease to own for as little as:$430 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$21,495.00

167
LKP
CALL 1-800-458-3687 FOR PRICING ON THIS ITEM
Mfg. item #: LKP
HUDLKP
FREE shipping when ordered with a machine from this manufacturer.20
Call for Price

167
LKM
CALL 1-800-458-3687 FOR PRICING ON THIS ITEM
Mfg. item #: LKM
HUDLKM
FREE shipping when ordered with a machine from this manufacturer.20
Call for Price

167
RPM
RPM AND HOUR METER - SAWMILL OPTIONS
Mfg. item #: RPM
HUDRPM
FREE shipping when ordered with a machine from this manufacturer.20
$60.00

167
LTS-5
CALL 1-800-458-3687 FOR PRICING ON THIS ITEM
Mfg. item #: LTS-5
HUDLTS-5
FREE shipping when ordered with a machine from this manufacturer.20
Call for Price

167
MFL
CALL 1-800-458-3687 FOR PRICING ON THIS ITEM
Mfg. item #: MFL
HUDMFL
FREE shipping when ordered with a machine from this manufacturer.20
Call for Price

167
DB1
CALL 1-800-458-3687 FOR PRICING ON THIS ITEM
Mfg. item #: DB1
HUDDB1
FREE shipping when ordered with a machine from this manufacturer.20
Call for Price

167
WM221-1.5
REPLACEMENT BAND BLADE FOR THE 52, FB. - SAWMILL OPTIONS
Mfg. item #: WM221-1.5
HUDWM221-1.5
FREE shipping when ordered with a machine from this manufacturer.20
$60.00

167
Copyright © 2016 Smith-Hamilton, Inc
0.011 160413 07:18