An abrasive blasting pot is a pressure vessel used to contain a supply of abrasive material during the abrasive blasting process. Used as part of an abrasive blasting system, the abrasive blasting pot delivers a mixture of abrasive and compressed air to the blast nozzle for surface preparation. The Blastmaster 3.5 Cu. Ft. HP-Series Abrasive Blasting Pot has a pressure-hold remote control system, allowing the abrasive blasting pot to remain pressurized when the remote control switch is activated or deactivated, shortening the activation cycle. Typical applications include blast rooms, blast yards, bridges, oil refineries, pipelines, and storage tanks. Common abrasives used include aluminum oxide, crushed glass, garnet, mineral abrasives, slags, and steel grit/shot.
Increased Production
The Blastmaster 130 Remote Control System is for high production applications, where an operator is frequently activating and deactivating the remote control switch during operator
repositioning.
Enhanced Safety
OSHA requires an air-blast pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by
the operator (29 CFR 1910.244(b)). The remote control system meets the OSHA requirement by providing a Fail-to-Safe configuration, which will deactivate the remote control system in the
event the operator drops or loses control of the remote control switch.
Portability
A heavy-duty handle, 16 inch semi-pneumatic tires, and lifting lugs allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.
Features:
|
The Blastmaster 130 Remote Control System is a pressure-hold remote control system that uses a signal from the remote control switch to remotely activate and deactivate an abrasive blasting pot |
The Blastmaster 3.5 cu. ft. M-Series Abrasive Blasting Pot steep angle, 90 degree cone bottom provides significantly improved abrasive flow versus a 60 degree dished cone. | |
The Blastmaster® Maxum III Abrasive Metering Valve screw-type design delivers superior metering, providing a precise air and abrasive mixture for maximizing production. |
Blastmaster Junior Extractor Moisture Separator Blastmaster Junior Extractor Moisture Separator removes excess moisture, oil, and other debris from compressed airbefore entering the abrasive blasting pot. |
|
Abrasive Screen, Heavy-Duty Lid and Umbrella The abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the abrasive blasting pot. |
|
Loading Skid The Loading Skid helps to protect the valves from damage while transporting the air-blast pot. |
|
Abrasive Cut-Off Switch System
The Abrasive Cut-Off Switch System allows the operator to use the Abrasive Blasting Hose to blow down |
3.5 Cu. Ft. HP-Series Abrasive Blasting Pots (w/Tungsten Carbide) | |
---|---|
Model | Description |
1035024 | Pneumatic Remote Control System and 1-1/2 inch Metering Valve |
1035024PKA | (PN#1035024) + 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator |
1035024LS | (PN#1035024) + Loading Skid |
1035024PKALS | (PN#1035024) + 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid |
Installed with: | |
1035030 | 12V DC Electric Remote Control System and 1-1/2 inch Metering Valve |
1035030PKA | (PN#1035030) + 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator |
1035030LS | (PN#1035030) + Loading Skid |
1035030PKALS | (PN#1035030) + 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid |
Installed with: | |
1035036 | 120V AC Electric Remote Control System and 1-1/2 inch Metering Valve |
1035036PKA | (PN#1035036) + a 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator |
1035036LS | (PN#1035036) + Loading Skid |
1035036PKALS | (PN#1035036) + a 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid |
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -PNEUMATIC REMOTE CONTROL SYSTEM & 1
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035024) + 1-1/2 EXTRACTOR ABRA
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035024) + LOADING SKID
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035024) + 1-1/2 EXTRACTOR ABRA
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -12V DC ELECTRIC REMOTE CONTROL SYST
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035030) + 1-1/2 EXTRACTOR ABRA
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035030) + LOADING SKID
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035030) + 1-1/2 EXTRACTOR ABRA
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -120V AC ELECTRIC REMOTE CONTROL SYS
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035036) + A 1-1/2 EXTRACTOR AB
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035036) + LOADING SKID
SOUTHERN TOOL NO LONGER SUPPORTS OR DISTRIBUTES THIS PRODUCT LINE -(PN#1035036) + A 1-1/2 EXTRACTOR AB