Extremely Heavy Duty A solidly built Machine designed to withstand the rigors of day to day production sanding. compare this Machine to ANY on the Market We are sure you will make a clear cut choice - The VEGA EBS-6 controls and easy adjustments, making duplication of turnings fast, easy and fun. All Vega Edge Belt Sanders include thoughtfully designed features which allow greater productivity and durability at a truly realistic price.
BELT TENSION ASSEMBLY
A superior idler pulley mechanism makes belt tracking insensitive to belt tension changes. The 5 inch Urethane coated steel pulley withheavy sealed bearings provides excellent belt support.
TABLE SUPPORT BRACKET
The main table support brackets allow the table to be tilted up 15 degrees and down 48 degrees by loosening the very secure tee handle. Table also adjusts in and out. Table can be adjusted vertically to provide 4 inch bias. No wrenches required. Table adjusts in and out to provide desired clearance from the belt. Table size is 12 x 48 inch.
ADJUSTABLE CURVE PLATTEN
(Accessory) It is always a challenge to sand large curves without producing a series of arcs. This accessory solves the problem for a wide range of shapes. The large adjusting knob varies the arc of a curve from flat to about a 12 inch radius. Quickly attaches to the rear of the sander and can be used with Accessory Side Table.
(Accessory) A 1/20 HP 110 volt Gearhead Motor oscillates the idler pulley to provide 1 inch belt movement 32 cycles per minute. An electrical disconnect is provided should you want to use it in a non-oscillating mode. Very easy to install on standard unit.
|Vega Edge Sanders & Oscillating Edge Sanders - Made in the USA|
|71104||EBS6-2 Edgebelt Sander, with 1 side table, Miter Gage, 2Hp, 1Ph, 220V, TEFC Motor with magnetic starter|
|71105||EBS6-3 Edgebelt Sander, with 1 side table, Miter Gage, 3Hp, 3Ph, 220V, TEFC motor with magnetic starter|
|71177||EBS6-2 OSC Edgebelt Sander, with Oscillating Drive, 1 side table, Miter Gage, 2Hp, 1Ph, 220V, TEFC Motor with magnetic starter|
|71178||EBS6-3 OSC Edgebelt Sander, with Oscillating Drive, 1 side table, Miter Gage, 3Hp, 3Ph, 220V, TEFC motor with magnetic starter|
Above models include 1 side table with support brackets, mitre gage, two (2) adjustable dust pick-ups, and one 8" x 48" platten.
|Vega Edge Sanding Accessories|
|71013||Oscillating Drive - Bolts on to provide 1 inch belt excursion for longer belt life and more efficient stock removal|
|71066||Second Side Table Second Side Table - Same as standard Front Table. Can be used with the Adjustable Curve Platten or the Rear Flat Platten.|
|71080||End Table Assy End Table Assembly - Fully adjustable for height and tilt. Operates with 5 inch diameter idler pulley for sanding inside radiuss.|
|71102||Adjustable Curve Platten - For sanding large radius inside curves|
|71166||Additional Flat Platten, 8 x 48 inch - Rear Flat Platten Bolts on to provide a second flat sanding station. Constructed of Hard Maple covered with graphite impregnated canvas.|