JWP-15DX: 15 CS Planer with Quick Change

Click here to download manual

For projects that require board thickness to be beyond exact, the New JET 15 inch Straight Knife planer gets the job done with ease. This sweet machine features a monster 3-horsepower motor with two speed gear box to adjust your feed rate for a better finished surface. The innovative Precision Air Strut System (PASS™) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe. Its rock-solid table is constructed of cast iron and features Steel infeed/outfeed table extensions that conveniently fold out of the way. And because even the coolest power planer is one of the messiest machines on the planet, JET’s angled 4 inch dust port keeps your dust hose out of the way for easy hookup on your shop’s dust collection system.

15 inch JET Straight Knife Planer, JWP-15B
has a 5 Year warranty

• Innovative JET - Precision Air Strut System (PASS) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe
• Straight Cutterhead has three high-speed steel knives that lock firmly in place to prevent movement while in use
• Heavy-duty precision ground cast iron table and four post design provides maximum control and support when passing boards through planer.
• Powerful 3-HP motor with v-belt transmission reduces vibration and running noise
• Dual infeed speed control for 16fpm or 20fpm, maximizes cut efficiency
• Maximum depth of cut 1/8 inch, 6 inch cutting height and 15 inch width capacity
• Heavy-duty folding infeed/outfeed tables provide support for work pieces and fold for convenience
• Large hand wheel with positive gear drive easily moves the head to the desired board thickness
• Magnetic Switch with green safety light illuminates when powered
• 4 inch Dust Port hooks up to dust management system and helps keep shop clean

Specifications
Part number	722150
Style (Type)	Floorstanding Model
Type of Cutterhead	Straight Knife
Cutterhead Speed (RPM)	5,200
Cutterhead Diameter (In.)	2-5/8 inch (68mm)
Cuts Per Minute	15600
Number of Knives	3
Maximum Depth of Cut (In.)	3/16 inch
Maximum Full Width Depth of Cut (In.)	1/8 inch
Maximum Planing Width (In.)	15 inch
Maximum Planing Thickness (In.)	6 inch
Minimum Planing Length (In.)	5.6 inch
Feed Rate (FPM)	16 and 20
Number of Speeds	2
Table Size (L x W) (In.)	15 x 21.45 in.
Table Size with Extensions (L x W) (In.)	15 x 21.45 in.
Dust Collection Minimum CFM Required (CFM)	600 CFM
Dust Port Outside Diameter (In.)	4 inch (102mm)
Motor Power (HP)	3
Motor Phase (PH)	1
Motor Voltage (V.)	230
Motor Amps	15
Height	44.8800
Length	29.9200
Weight	313.5000
Width	26.7700

Click here to download manual

The New JET 15 inch helical head planer quickly and quietly transforms rough lumber into smooth boards. This machine means business with a powerful 3 HP motor combined with a helical cutterhead housing 48 staggered carbide quick change knives. The innovative Precision Air Strut System (PASS) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe. The conveniently located two-speed gear box allows for quick and easy feed rate adjustments while removing up to 1/8-inch material with each pass for a smooth finish. A large Precision cast-iron table and infeed/outfeed tables make this planer a beautiful addition to the shop.

15 inch JET Helical Cutterhead Planer, JWP-15BHH
has a 5 Year warranty

• Innovative JET - Precision Air Strut System (PASS) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe
• Helical Cutterhead houses 48 staggered carbide knives that are engineered to align themselves without any adjustment for a superior finish and quieter cut
• Heavy-duty precision ground cast iron table and four post design provides maximum control and support when passing boards through planer.
• Powerful 3-HP motor with v-belt transmission reduces vibration and running noise
• Dual infeed speed control for 16fpm or 20fpm, maximizes cut efficiency
• Maximum depth of cut 1/8", 6" cutting height and 15" width capacity
• Large cast Iron precision ground infeed/outfeed tables provide support for large work pieces
• Large hand wheel with positive gear drive easily moves the head to the desired board thickness
• Magnetic Switch with green safety light illuminates when powered
• 4" Dust Port hooks up to dust management system and helps keep shop clean

Specifications
Part number	722155
Style (Type)	Floorstanding Model
Type of Cutterhead	Helical Head
Cutterhead Speed (RPM)	5,200
Cutterhead Diameter (In.)	2-5/8 inch (68mm)
Cuts Per Minute	Continuous
Number of Knives	48
Maximum Depth of Cut (In.)	1/8 inch
Maximum Full Width Depth of Cut (In.)	1/8 inch
Maximum Planing Width (In.)	15 inch
Maximum Planing Thickness (In.)	6 inch
Minimum Planing Length (In.)	5.6 inch
Feed Rate (FPM)	16 and 20
Number of Speeds	2
Table Size (L x W) (In.)	15 x 46.5 in.
Table Size with Extensions (L x W) (In.)	15 x 49.2 in.
Dust Collection Minimum CFM Required (CFM)	600 CFM
Dust Port Outside Diameter (In.)	4 inch (102mm)
Motor Power (HP)	3
Motor Phase (PH)	1
Motor Voltage (V.)	230
Motor Amps	15
Height	44.8800
Length	29.9200
Weight	330.5000
Width	26.7700

15" Closed Stand Wood Planer

• Table adjusts quickly and accurately with a handwheel through a positive gear drive system

• Cast iron and steel construction for added stability and durability

• Powerful 3 HP totally enclosed fan cooled motor, 3 v-belt delivers full power with magnetic switch

• Steel feed rollers, serrated infeed and smoother outfeed, allow for 1/8" depth of cut

• The gearbox features an automatic chain tensioner

• Exclusive 4" dust port angled to the side designed for efficient chip removal and to keep the dust hose out of the way of your work

• Two steel work return rollers on top of the machine to make transfering your work back easier

• Table locks to assure no table movement while machine is in use

• Set of three infeed and outfeed roller to help support your work piece

• One piece steel stand with lockable casters through a quick-lock foot pedal