Exhaust Bender EB-300
Have an automotive repair shop that is constantly outsourcing your exhaust jobs because you dont have the right tube bender for the job? If that is the case look, at the EB-300 exhaust bender from Baileigh Industrial. This just might be tool you need to add profitability back to your jobs. The EB-300 comes with everything you need to get started.
For bending, the EB-300 exhaust bender comes with standard radius tooling from 1-1/2 up to 3 inch OD (for 2-1/4 to 3 inch OD tubing 12 gauge mild steel wall thickness is required). The EB-300 is considered a compression bender as it uses one large hydraulic ram to push the inside radius die into the compression assisted outside counter dies. The outside dies have two hydraulic cylinders that applies pressure at the point of bend on the inside radius die. The end result is that the machine can bend light gauge tubing without folding the material in half. The EB-300 exhaust pipe bender requires 220 volts of single phase power is operated using knee controls, allowing hands to be kept free for material control.
This exhaust bender also comes equipped with tube end forming station. This station includes tooling to expand, flare and swage the tubing. It also allows the operator to create ball joints and flanges.
The EB-300 exhaust bender comes filled with hydraulic fluid and has an oil sight glass to ensure the proper level is maintained at all times. A useful tooling tray is standard as well so the tooling stays with the machine instead of getting lost in a busy auto shop.
Baileigh Industrial exhaust benders are well built to last for decades of profitable production. For more information contact a representative.
Click on link below for list of Standard Tooling included with the bender
List of Standard Tooling
EB300-Half Shoe Spacer Spacer for Half Bending Shoes 1
EB300-Full Shoe Spacer Pacer for Full Length Bending Shoes 2
EB300-4009 1-1/2" Round Tube Full Length Bending Shoe 2
EB300-4010 1-3/4" Round Tube Full Length Bending Shoe 2
EB300-4011 2" Round Tube Full Length Bending Shoe 2
EB300-4012 2-1/4" Round Tube Full Length Bending Shoe 2
EB300-4013 2-1/2" Round Tube Full Length Bending Shoe 2
EB300-4014 3" Round Tube Full Length Bending Shoe 2
EB300-4015 2-1/4" Round Tube Half Length Bending Shoe 1
EB300-4016 2-1/2" Round Tube Half Length Bending Shoe 1
EB300-4017 1-1/2" Round Tube Half Length Bending Shoe 2
EB300-4018 1-3/4" Round Tube Half Length Bending Shoe 2
EB300-4019 2"Round Tube Half Length Bending Shoe 2
EB300-4020 Expander Tip for 1-1/2" to 1-3/4" 1
EB300-4021 Expander Tip for 1-3/4" to 3-1/2" 1
EB300-4025 Pipe Flanger 1-1/2" to 3" 1
EB300-4026 Expander Arbor for 1-3/8" to 3-1/2" 1
EB300-4027 2-1/2" Round Tube Clamp Collet (2 Halves) 1
EB300-4028 2-1/4" Round Tube Clamp Collet (2 Halves) 1
EB300-4029 1-1/2" Round Tube Clamp Collet (2 Halves) 1
EB300-4030 2" Round Tube Clamp Collet (2 Halves) 1
EB300-4031 1-3/4" Round Tube Clamp Collet (2 Halves) 1
Specifications | |
---|---|
Degree of Bend (Max) | 180 degree |
Call Your Baileigh Rep For More Details | 920-684-4990 |
Motor Hp | 4 hp |
Capacity Round OD (Mild Steel) | 1-1/2 inch up to 3 inch OD (for 2-1/4 to 3 inch OD tubing 12 gauge mild steel wall thickness is required) |
Power | 220V / 1-phase |
Product and Accessories | |
---|---|
EB-300 | Exhaust Tube Bender |
EB300-4009 | 1-1/2 inch Round Tube Full Length Bending Shoe |
EB300-4010 | 1-3/4 inch Round Tube Full Length Bending Shoe |
EB300-4011 | 2 inch Round Tube Full Length Bending Shoe |
EB300-4012 | 2-1/4 inch Round Tube Full Length Bending Shoe |
EB300-4013 | 2-1/2 inch Round Tube Full Length Bending Shoe |
EB300-4014 | 3 inch Round Tube Full Length Bending Shoe |
EB300-4015 | 2-1/4 inch Round Tube Half Length Bending Shoe |
EB300-4016 | 2-1/2 inch Round Tube Half Length Bending Shoe |
EB300-4017 | 1-1/2 inch Round Tube Half Length Bending Shoe |
EB300-4018 | 1-3/4 inch Round Tube Half Length Bending Shoe |
EB300-4019 | 2 inch Round Tube Half Length Bending Shoe |
EB300-4020 | Expander Tip for 1-1/2 to 1-3/4 inch |
EB300-4021 | Expander Tip for 1-3/4 to 3-1/2 inch |
EB300-4025 | Pipe Flanger 1-1/2 to 3 inch |
EB300-4026 | Expander Arbor for 1-3/8 to 3-1/2 inch |
EB300-4027 | 2-1/2 inch Round Tube Clamp Collet (2 Halves) |
EB300-4028 | 2-1/4 inch Round Tube Clamp Collet (2 Halves) |
EB300-4029 | 1-1/2 inch Round Tube Clamp Collet (2 Halves) |
EB300-4030 | 2 inch Round Tube Clamp Collet (2 Halves) |
EB300-4031 | 1-3/4 inch Round Tube Clamp Collet (2 Halves) |
EB300-4032 | Segment Expander 1-3/4 to 2-1/8 inch (Red) |
EB300-4033 | Segment Expander 2-1/8 to 2-1/2 inch (Black) |
EB300-4034 | Segment Expander 2-1/2 to 3 inch (Green) |
CALL NOW 800-458-3687 FOR EXPERT ADVISE
OR ADD TO CART FOR YOUR BEST BROTHER-IN-LAW DEAL ON THIS BAILEIGH ITEM, LIMITED QUANTITY AVAILABLE, SALE ENDS 12/31/2024, PC CODE: BAHO2024