chat now with southern tool
Technical Sales 1–800–458–3687

Baileigh PT-510HD Plasma Table

PT-510 Plasma table
Click image to enlarge

The PT-510HD CNC plasma table can cut a 5 ft X 10 ft plate of steel up to 5/8 inch thick and up to 3/8 inch steel plate at full production speed. This cnc plasma machine comes standard with a heavy duty 60 Amp Thermo Dynamics plasma cutting system that requires 220 volts of single phase power so it can work in virtually any fabrication shop.

The PT-510HD CNC plasma cutting table comes standard with a ruggedly constructed square and rectangle box frame, built to easily handle the weights of loading the machine at maximum capacity (note: the machine was built to easily handle a 1 inch thick piece of steel plate that is 5 ft X 10 ft). The machine is so well built that it weighs in at an impressive 3520 lbs of heavy steel construction. Like all Baileigh CNC plasma tables it comes pre-built so there is minimal assembly required, noting that this is a serious industrial machine and not a kit model like other hobby machines on the market.

This CNC plasma cutting table comes standard with our easy to use design software that can be loaded into any basic PC and downloaded via an included communication wire or remotely by USB stick. A sturdy operation control station includes basic stop, start, and run functions as well as a large operator control console screen with key pad controls. This CNC plasma machine can run any program designed by the software and controls the X, Y & Z axes. The Z axes has automatic height detection allowing for perfect arc distance at all times even on uneven materials, making each cut perfect, every time.

The PT-510HD CNC plasma table has an industrial grade gantry travel system for the X, Y & Z axes. They ride on heavy Thomson shafts with needle bearing shuttles that use wiper dies to keep the welding dust out of the bearing for a smooth transfer without any chatter. The gantry is driven by Panasonic servo bushless motors that are controlled by Panasonic servo motion controllers so the machine is dead on accurate compared to other models that use simple stepper motor designs.

Like all Baileigh CNC plasma cutting tables the PT-510HD is an industrial grade plasma table that will provide the fabrication shop with decades of profitable use

Baileigh Industrials line of CNC plasma tables are unlike anything currently on the market in its price range.  Available in standard and heavy duty models, these plasma tables include everything necessary to get started at an affordable price.

The standard model plasma tables are available in two versions; either with or without auto height detection.  Auto height detection has proven very popular for plasma tables that regularly cut material over 3/8â€Âù thick and for cutting variable material heights during a program. 

Every Baileigh Industrial CNC plasma table features a standalone pedestal.  The standard models utilize a hand held control for the movement of the plasma head, while the heavy duty models incorporate a live screen to watch the cutting process.  In addition, the live screen also allows for limited programming within the unit.

The Baileigh Industrial heavy duty line of CNC plasma tables comes with the auto height detection standard and uses high quality industrial grade Panasonic® servo motors to control the movement of the gantry and Thermal Dynamics® plasma system, while the standard models feature high quality, robust stepper motors and a down draft table for years of trouble free use.

PT-510HD

  • 5' x 10' Cutting Area
  • High Quality Panasonic® Servo Motors on X and Y Axis
  • E-Z Load Material Side Rails
  • Fully Welded Main Frame Will Support Up to 1" Thick Mild Steel
  • Heavy Duty Extruded Aluminum Gantry
  • Automatic Height Detection System
  • Industrial Cable Track
  • Hardened, Ground and Polished Slide Ways
  • Control Console with Programming
  • 10.5" Display
  • Includes 2 Sets of Easy to Use Programming Software
  • Heavy Duty Construction weighs 3500lbs
  • Factory Assembled
  • 220V Single Phase 60hz
  • 156 x 91 x 65 / wgt 3396 lbs
A60 A80 A120

When Baileigh Industrial decided to launch the best value in CNC plasma cutting tables on the market, they knew that an inferior cutting system would only hurt the reputation that Baileigh Industrial has built over the years.  That being said, Baileigh Industrial decided to partner with Thermal Dynamics and offer the Cutmaster Automation Series line of plasma cutters.

Baileigh Industrial is offering three versions that are perfect for use with their plasma tables, the A60, A80, and the robust A120.  Just pick the version that best fits your needs and get cutting.

Baileigh Plasma Tables Sold Only with Baileigh Plasma Cutting System
Tables are not Sold separately

PT-510HD
NO LONGER AVAILABLE - CALL FOR NEW PART NUMBER
Mfg. item #: PT-510HD
BAIPT-510HD
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

353
A60
THERMADYNE CUT MASTER A-60 AUTOMATIC PLASMA CUTTING SYSTEM, (3/8 PRODUCTION). 220V SINGLE PHASE, 25 CABLE
Mfg. item #: A60
BAIA60
lease to own for as little as:$67 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,372.23

1655
A80
THERMADYNE CUT MASTER A-80 AUTOMATIC PLASMA CUTTING SYSTEM, (1/2 PRODUCTION). 220V SINGLE PHASE, 25 CABLE
Mfg. item #: A80
BAIA80
lease to own for as little as:$84 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,202.30

648
A120
THERMADYNE CUT MASTER A-120 AUTOMATIC PLASMA CUTTING SYSTEM, (5/8 PRODUCTION). 220V SINGLE PHASE, 25 CABLE
Mfg. item #: A120
BAIA120
lease to own for as little as:$103 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$5,172.14

1655
Copyright © 2018 Smith-Hamilton, Inc
0.005 150419 18:39