Baileigh Rotary Draw Bender Accessories

Rotary Indexing Table

What is the perfect complement to any computer controlled Baileigh Tube and Pipe Bender?  A rotary indexing table, of course.

A Baileigh Industrial tube bender fitted with a rotary positioning table allows for accurate bends in varying planes, as well as consistent measurements between bends. Available for the RDB-250, 325, and 350-TS, the tables are available in lengths of 5, 10, 15, and 20', there is a table perfect for any size shop.  Only have some jobs that would require the rotary indexing table, it can be attached or taken off of the pipe bender with ease.

The table comes with an 8" three jaw chuck with 2-1/2 inch thru hole that allows for longer pieces of tubing than the table length. Chuck can handle up to 4-1/2 inch OD. The minimum OD is 1/4 inch.  The table has a linear indicator strip so the operator can set up accurate distances between bends. Mechanical stops can be positioned for the start of each bend. Using the mechanical stops is very beneficial for repeatability on bigger production runs.  Another nice feature of the table is that the positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings.  These bearings are placed on eccentric shafts, which allows for tolerance adjustment allowing the most accurate results.

For more information, please contact Baileigh Industrial at 800-458-3687

Click on part number below to be directed to pricing table

ANGLE FINDERS INSTANTLY IMPROVE ACCURACY WHEN TUBE BENDING ON VARYING PLANES! WORKS WITH ANY BRAND OF BENDER!

The AF-360D angle finder or tubing bender plane of bend degree indicator is a must for any fabricator who is working with hand railing, auto chassis, etc., anything that requires an accurate rotation of the previous bend completed, before performing the next bend. A tube or pipe bender that has a positioning table is complimented with the attachment of an AF-360D angle finder. When bending complex exhaust with multiple bends on varying planes (if you can imagine rotating the tube up into the air and then down again to clear a drive shaft or suspension). There is also a benefit when bending hand railing to rotate pipe 32° for the stairwell pitch. Knowing where the plane of bend is exactly saves time and materials, and increases profit to the tubing bender

• Attach the AF-360D to the following end of tube or pipe before bending, complete a bend and rotate material accurately to desired degree and before next bend.
• Digital indicator accurately detects where plane of bend is within total 360 ° rotation in 180° increments.
• Fits 3/4" OD, up to 3.5" OD
• Ensures that pipe or tube stays on a level plane.
• Immediate payback due to material savings when tube bending.
• Perfect for all applications that require more than one bend in material.

Click on part number below to be directed to pricing table

Universal Bending Plate

These types of machines can bend with standard tooling and be limited to bend only up to 206 degrees when standard tubing and pipe dies are being used. However, if the fabricator needs to bend solid bar or rounds to into various shapes, then the RDB electric programmable controllers can bend in either direction using the UBP-1200 universal bending plate.

The UBP-1200 universal bend plate is made from solid steel for long life and comes with the plate that gets bolted to the drive plate on the universal bender.  It comes with a round center die, removable pin for start and stop of bend, as well as the roller counter die assembly.  With multiple holes drilled and tapped throughout the plate the fabricator has endless capabilities on one simple tooling set.

Call your Baileigh representative to find out more about the universal bend plate option for your universal bender with electronic programmable controllers.  We typically have this in stock for same day shipments.  Of course confirm that this option will work with your model of machine before ordering.

Click on part number below to be redirected to pricing table