|
![]() |
![]() |
VMD-30VS Vertical Mill Drill | VMD-828G Vertical Mill Drill | VMD-931G Vertical Mill Drill |
|
Vertical Mill Drill VMD-30VS Made in Taiwan When combining two different functions into one machine, the designer has to be careful to not lose the best functions of the original machines. Baileigh Industrials VMD-30VS mill drill is a perfect example of that. They took the popular DP-1250VS drill press and mated it with a 29 x 8 inch milling table. The result is nothing more than remarkable. This may be the perfect mill drill for any fabrication shop or school looking to save space yet not skimp on features. The VMD-30VS is an inverter driven variable speed mill drill that runs on 220 volts of single phase power. The Delta inverter allows the VMD-40VS to turn at speeds from 0 to 2500 rpm. Being able to infinitely adjust tooling speed is important to prolong tooling life and save money. In order to strengthen the VMD-30VS to be able to handle the stresses of milling, the column from the DP-1250VS was shortened and a full cast iron base was put in its place. The whole assembly then sit on top of a full metal base that integrates a flood coolant system to further gain tool life |
Specifications | |
---|---|
Model | VMD-30VS |
X Axis Travel | 14.5 inch |
Y Axis Travel | 6.67 inch |
Spindle Nose to Table | 19.7 inch |
Spindle Speed | 150-2500 RPM |
Spindle Taper | R8 |
Tapping Capacity | .625 inch |
Table Size | 28.75 x 8.25 inch |
T Slots | .625 inch |
Motor Coolant | 1/8 hp |
Power | 220V Single Phase |
Shipping Weight | 616 lbs. |
Drill Capacity | 1.125 inch |
Spindle Travel | 5.9 inch |
Shipping Dimensions | 60 x 44 x 68 inch |
![]() |
VMD-828G - VERTICAL MILL DRILL Dont have the space for both a gear-driven drill press and a milling machine? The VMD-828G combines 2 functions in 1 space-efficient machine. This mill drill lets you set the right speed for a given application, providing greater control and extending tooling life. Features:
|
Specifications | |
---|---|
Item Number | VMD-828G |
Spindle Speeds | 90, 210, 345, 670, 1180, 1970 RPM |
Table Size | 28.75 x 8.25 inch |
Motor | 2 hp |
X Axis Travel | 19-1/2 inch |
Y Axis Travel | 9 inch |
Spindle Nose to Base | 16.14 inch |
Spindle Stroke | 4-3/4 inch |
Spindle Taper | R8 |
T Slots | 0.550 inch |
Coolant Pump | 1/8 hp |
Power | 110V |
Shipping Weight | 710 lbs. |
Drill Capacity | 1.5 inch |
Spindle Travel | 4.75 inch |
Shipping Dimensions | 60 x 44 x 48 inch |
specifications subject to change without notice |
![]() |
VMD-931G - VERTICAL MILL DRILL Ever wish you had a milling table on your drill press? Thats why we came up with the VMD-931G. Unlike most milling machine-drill combinations, this multi-functional vertical mill drill lets you select the right speed to suit your application and cut down on tooling wear and tear. Features:
|
Specifications | |
---|---|
Item Number | VMD-931G |
Table Size | 31.5 x 9.45 inch |
Head Miter | 90 deg Left and Right |
Motor | 2 hp |
X Axis Travel | 22 inch |
Y Axis Travel | 7.48 inch |
Spindle Nose to Table | 17.32 inch |
Spindle Speed | 90,210,345,670,1180,1970 RPM |
Spindle Stroke | 4.75 inch |
Spindle Taper | R8 |
T Slots | 0.55 inch |
Coolant Pump | 1/8 hp |
End Mill Size | 1.25 inch Max |
Power | 110V |
Shipping Weight | 710 lbs |
Drill Capacity | 1.5 inch |
Spindle Travel | 4.75 inch |
Shipping Dimensions | 69 x 44 x 70 inch |
specifications subject to change without notice |
Models | |
---|---|
VMD-30VS | 220V SINGLE PHASE INVERTER DRIVEN MILLING AND DRILLING MACHINE |
VMD-828G | 110V GEAR DRIVEN MILL AND DRILL, INCLUDES STAND, COOLANT SYSTEM, WORK LIGHT, AND R8 SPINDLE, 8 X 28 TABLE |
VMD-931G | 110V GEAR DRIVEN MILL AND DRILL, INCLUDES STAND, COOLANT SYSTEM, WORK LIGHT, POWER X, AND R8 SPINDLE, 9 X 31 TABLE |
CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER -IN LAW DEAL ON THIS BAILEIGH ITEM
CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER -IN LAW DEAL ON THIS BAILEIGH ITEM