PL-1340 220V, 1PH, 2HP. 13 x 39 inch |
PL-1640 220V, 3PH, 7-1/2HP. 16 x 40 inch |
PL-1860 220V, 3PH, 7-1/2HP. 18 x 60 inch |
PL-2060 220V, 3PH, 15HP. 20 x 60 inch |
PL-2080 220V, 3PH, 15HP. 20 x 80 inch |
|
Metal Lathe PL-1340 Made In Taiwan The PL-1340 precision metal lathe from Baileigh Industrial is perfect for those machine shops where precision cannot be compromised. Like all Baileigh Industrial precision lathes, this small yet sturdy lathe is built to exacting specifications using only the best quality components. The PL-1340 is powered by 220 volt single phase power which makes it great for those shops where power selection is limited. The PL-1340 is a gear head metal lathe that offers eight speeds that vary from 70 to 2000 RPM. It also uses precision ground and hardened slide ways for all movement of the machining carriage. But, even the best ways are only as good as the castings they are attached to, so to make the PL-1340 one of the most rigid in its class, Baileigh Industrial only uses the best castings in the industry for both fit and finish. Other features included as standard on the PL-1340 precision metal lathe are; a halogen light, three jaw chuck, flood coolant system, backsplash, four way tool post and steady and follow rests. Another nice feature of the PL-1340 is that it has a factory installed Mitutoyo DRO (digital read out) great for making precise cuts. Contact a representative for more information |
Specifications | |
---|---|
Model | PL-1340 |
Set Over | +/- .375 inch |
Speed | 70 - 2000 rpm |
Spindle Bore | 1.5 inch |
Threads Diametrical Qty Type | 32 / 8 - 120 D.P. |
Threads Imperial Qty Type | 31 / 4 - 56 T.P.I. |
Threads Metric Qty Type | 26 / .4 - 7 mm pitch |
Threads Module Qty Type | 21 / .2 - 3 M.P. |
Spindle Taper Sleeve | Morse #3 |
Spindle Taper Nose | Morse #5 |
Tailstock Quill Dia | 1.65 inch |
Tailstock Quill Taper | Morse #3 |
Tailstock Quill Travel | 4.5 inch |
Compound Rest Travel | 2.68 inch |
Compound Rest Width | 3 inch |
Center Height | 6.5 inch |
Bed Length | 5.125 inch |
Bed Width | 7.375 inch |
Bend Height | 11.41 inch |
Longitudinal Feeds Metric Qty Speed | 32 / .052 - 13.92 mm / rev. |
Main Motor | 2 hp |
Longitudinal Feeds Imperial Qty Speed | 32 / .0020 - .5480 inch / rev. |
Lead Screw Diameter | .875 inch |
Lead Screw Thread Pitch | 8 T.P.I. |
Max. Swing In Gap Length | 4.5 inch |
Max. Swing Over Bed | 13 inch |
Max. Swing Over Cross Slide | 7.79 inch |
Max. Swing In Gap Dia | 18.75 inch |
Cross Slide Travel | 6.29 inch |
Cross Slide Width | 4.625 inch |
Cutting Tool Max Section | .625 x .625 inch |
Distance Between Centers | 40 inch |
Feed Rod | .75 dia. |
Power | 220V 1-Phase |
Shipping Weight | 1,628 lbs. |
Shipping Dimensions | 79 x 33 x 59 inch |
|
Baileigh Precision Lathe PL-1640 Made In Taiwan The PL-1640 metal working lathe is the perfect combination of size and power. This precision lathe features a 16 inch swing and 40 inch between centers and has features that will allow your shop to grow for years. The PL-1640 is built to Baileigh industrials high standards and has everything that a machine shop could want. The PL-1640 has a full cast iron base that is integrated into the main frame of the lathe, making this one of the most rigid lathes on the market. It is powered by a 7.5 hp motor and can turn rpms form 30 to 2000 through its 12 speeds. The PL-1640 metal working lathe is built to withstand years of use in any metal working shop and features precision ground and hardened ways. The PL-1640 comes standard with a factory installed Mitutoyo DRO (digital read out) for making precise cuts, halogen light, a three jaw chuck, steady rest and follow rest. All this in one complete package. For more information on this or any of the Baileigh Industrial metal lathes, contact our representative. |
Specifications | |
---|---|
Model | PL-1640 |
Speed | 30 - 2000 rpm |
Spindle Bore | 2.0625 inch |
Threads Diametrical Qty Speed | 32 / 4 - 32 D.P. |
Threads Imperial Qty Speed | 40 / 2 - 56 T.P.I. |
Threads Metric Qty Speed | 53 / .4 - 14 mm pitch |
Threads Module Qty Speed | 44 / .4 - 7 M.P. |
Spindle Taper Sleeve | Morse #4 |
Spindle Taper Nose | Morse #6 |
Tailstock Quill Dia | 2.125 inch |
Tailstock Quill Taper | Morse #4 |
Tailstock Quill Travel | 4.75 inch |
Compound Rest Width | 4.33 inch |
Center Length | 40 inch |
Center Height | 7.086 inch |
Compound Travel | 4.75 inch |
Bed Height | 12.20 inch |
Bed Length | 74.75 inch |
Bed Width | 11.81 inch |
Longitudinal Feeds Metric Qty Speed | 40 / .032 - .640 mm / rev. |
Main Motor | 7.5 hp |
Longitudinal Feeds Imperial Qty Speed | 40 / .0012 - .0252 inch / rev. |
Lead Screw Diameter | 1.25 inch |
Lead Screw Thread Pitch | 4 T.P.I. |
Max. Swing In Gap Length | 6.125 inch |
Max. Swing Over Bed | 16 inch |
Max. Swing Over Cross Slide | 9.45 inch |
Max. Swing In Gap Dia | 23.42 inch |
Cross Feeds Imperial Qty Speed | 40 / .0006 - .0126 inch / rev. |
Cross Feeds Metric Qty Speed | 40 / .015 - .320 mm / rev. |
Cross Slide Travel | 9 inch |
Cross Slide Width | 7.08 inch |
Cutting Tool Max Section | .625 x .625 inch |
Feed Rod | .708 dia. |
Power | 220V / 3-Phase |
Shipping Weight | 4,400 lbs. |
Shipping Dimensions | 91 x 65 x 44 inch |
specifications subject to change without notice |
|
Engine Lathe PL-1860 Made in Taiwan The Baileigh Industrial PL-1860 engine lathe is a great investment that out performs other lathes in this class. It is affordable, rugged, reliable and easy to operate. The PL-1860 includes a vast array of features and accessories as standard equipment. Things like the Mitutoyo 2 Axis Digital Readout System, 8 inch 3-Jaw Universal Chuck, 8 inch Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Rear Splash Guard, and Halogen Work Light are all included. Constructed from 100 percent cast iron, the PL-1860 engine lathe is built to last and is known for consistent performance and durability even under the most demanding work conditions. Precision ground and hardened ways on the PL-1860 are further protected by a Turcite-B coating, which offers years of protection to the ways when under the most grueling turning conditions. The PL-1860 gear head lathe has 12 different speed combinations allowing for speeds between 80 and 2000 RPM. A powerful 7-1/2 HP motor allows for heavy cuts to be shaved off of the turned part. This allows for better turned surfaces, faster production, and longer tooling life. Contact a representative for more information. |
Specifications | |
---|---|
Model | PL-1860 |
Speed | 30 - 2000 rpm |
Spindle Bore (in) | 2.375 |
Threads Diametrical Qty Speed | 32 / 4 - 32 D.P. |
Threads Imperial Qty Speed | 40 / 2 - 56 T.P.I. |
Threads Metric Qty Speed | 53 / .4 - 14 mm pitch |
Threads Module Qty Speed | 44 / .4 - 7 M.P. |
Spindle Taper Sleeve | Morse #4 |
Spindle Taper Nose | Morse #6 |
Tailstock Quill Dia (in) | 2.125 |
Tailstock Quill Taper | Morse #4 |
Tailstock Quill Travel (in) | 4.75 |
Compound Rest Width (in) | 4.92 |
Center Length (in) | 60 |
Center Height (in) | 9 |
Compound Travel (in) | 5.31 |
Bed Height (in) | 12.20 |
Bed Length (in) | 74.75 |
Bed Width (in) | 11.81 |
Longitudinal Feeds Metric Qty Speed | 40 / .032 - .640 mm / rev. |
Main Motor | 7.5 hp |
Longitudinal Feeds Imperial Qty Speed | 40 / .0012 - .0252 / rev. |
Lead Screw Diameter (in) | 1.25 |
Lead Screw Thread Pitch | 4 T.P.I. |
Max. Swing In Gap Length (in) | 6.125 |
Max. Swing Over Bed (in) | 18 |
Max. Swing Over Cross Slide (in) | 11.3125 |
Max. Swing In Gap Dia (in) | 25.196 |
Cross Feeds Imperial Qty Speed | 40 / .0006 - .0126 / rev. |
Cross Feeds Metric Qty Speed | 40 / .015 - .320 mm / rev. |
Cross Slide Travel (in) | 9 |
Cross Slide Width (in) | 7.08 |
Cutting Tool Max Section (in) | .625 x .625 |
Feed Rod | .708 dia. |
Power | 220V / 3-phase |
Shipping Weight | 5,060 Lbs |
Shipping Dimensions (in) | 112 x 65 x 44 |
|
Gap Bed Lathe PL-2060 Made in Taiwan The PL-2060 gap bed lathe has a 20 inch swing and 60 inch between the centers and is the perfect size for almost any machine shop or fabrication shop where a precision cut is the most important thing. The PL-2060 has a 15 hp motor that is run on220 volts of three phase power. This is more than enough power to handle the most demanding jobs. The body of the PL-2060 is made from cast iron that is precisely machined to exacting tolerances to ensure a rigid and stable platform in which to work. Baileigh Industrial only uses the best casting suppliers for their lathes. The ways are polished and have integrated wipers to keep them moving like the day they were ne for years to come. Other key features of the PL-2060 gap bed lathe are digital readouts for both the x and y axis, making it easier than ever to make perfect cuts. A 12 inch 3 jaw chuck with a 3-1/8 inch bore is also standard. Baileigh Industrial tries to include all that is necessary to get your machine up and running, this includes longitudinal rapid traverse , 8 inch back plate, coolant system, steady rest, follow rest, headstock chuck guard with micro switch, micrometer saddle stop, rear splash guard, and halogen work light. If you would like more information on the PL-2060 bed gap lathe, contact a Southern-Tool representative. |
Specifications | |
---|---|
Model | PL-2060 |
Speed | 20 - 1550 rpm |
Spindle Bore | 3.125 inch |
Spindle Nose | D1-8 inch |
Threads Diametrical Qty Speed | 50 / 4 - 112 D.P. |
Threads Imperial Qty Speed | 60 / 2 - 112 T.P.I. |
Threads Metric Qty Speed | 60 / .2 - 14 mm pitch |
Threads Module Qty Speed | 50 / .2 - 7 M.P. |
Spindle Taper Sleeve | Morse #5 |
Spindle Taper Nose | Morse #7 |
Tailstock Quill Dia | 2.9375 inch |
Tailstock Quill Taper | Morse #5 |
Tailstock Quill Travel | 6.3125 inch |
Compound Rest Travel | 10 inch |
Center Length | 80.313 inch |
Center Height | 10 inch |
Bed Width | 16.125 inch |
Longitudinal Feeds Metric Qty Speed | 50 / .037 - .983 mm / rev. |
Main Motor | 15 hp |
Longitudinal Feeds Imperial Qty Speed | 50 / .0014 - .0387 inch / rev. |
Lead Screw Diameter | 1.5 inch |
Lead Screw Thread Pitch | 4 T.P.I. |
Max. Swing In Gap Length | 7.0625 inch |
Max. Swing Over Bed | 20 inch |
Max. Swing Over Cross Slide | 13 inch |
Max. Swing In Gap Dia | 26.375 inch |
Cross Feeds Imperial Qty Speed | 50 / .0007 - .01935 inch / rev. |
Cross Feeds Metric Qty Speed | 50 / .0185 - .52 mm / rev. |
Cross Slide Travel | 12.5 inch |
Power | 220V / 3-phase |
Shipping Weight | 5,456 lbs. |
Shipping Dimensions | 121 x 54 x 67 inch |
specifications subject to change without notice |
|
Precision Metal Lathe PL-2080 Made in Taiwan When size of your lathe does matter, look at the PL-2080 precision metal lathe from Baileigh Industrial. This engine lathe has an ample 20 inch swing over bed with 80 inch between centers and a powerful 15HP motor. This powerful motor turns the precision gear head with different 12 speeds to a range of rpms from 20 to 1500. Everything about the PL-2080 says power. The body of the PL-2080 is made from the best cast iron to ensure a rigid and stable platform in which to work. The cast pieces are fully integrated with the head stock, making sure every joint is tight. The ways are polished and have integrated wipers to keep them moving like the day they were new for years to come. But just because this is one monster of a machine, dont think we forgot the features. The PL-2080 precision metal lathe comes with Mitutoyo 2 axis digital readout system, 12 inch 3-jaw universal chuck, longitudinal rapid traverse , 10 inch back plate, coolant system, steady rest, follow rest, headstock chuck guard with micro switch, micrometer saddle stop, rear splash guard, and halogen work light. If you would like more information on the PL-2080 precision metal lathe, contact a Southern-Tool representative. |
Specifications | |
---|---|
Model | PL-2080 |
Speed | 20 - 1550 rpm |
Spindle Bore | 3.125 inch |
Spindle Nose | D1-8 inch |
Threads Diametrical Qty Speed | 50 / 4 - 112 D.P. |
Threads Imperial Qty Speed | 60 / 2 - 112 T.P.I. |
Threads Metric Qty Speed | 60 / .2 - 14 mm pitch |
Threads Module Qty Speed | 50 / .2 - 7 M.P. |
Spindle Taper Sleeve | Morse #5 |
Spindle Taper Nose | Morse #7 |
Tailstock Quill Dia | 2.9375 inch |
Tailstock Quill Taper | Morse #5 |
Tailstock Quill Travel | 6.3125 inch |
Compound Rest Travel | 10 inch |
Center Length | 80.313 inch |
Center Height | 10 inch |
Bed Width | 16.125 inch |
Longitudinal Feeds Metric Qty Speed | 50 / .037 - .983 mm / rev. |
Main Motor | 15 hp |
Longitudinal Feeds Imperial Qty Speed | 50 / .0014 - .0387 inch / rev. |
Lead Screw Diameter | 1.5 inch |
Lead Screw Thread Pitch | 4 T.P.I. |
Max. Swing In Gap Length | 7.0625 inch |
Max. Swing Over Bed | 20 inch |
Max. Swing Over Cross Slide | 13 inch |
Max. Swing In Gap Dia | 26.375 inch |
Cross Feeds Imperial Qty Speed | 50 / .0007 - .01935 inch / rev. |
Cross Feeds Metric Qty Speed | 50 / .0185 - .52 mm / rev. |
Cross Slide Travel | 12.5 inch |
Power | 220V / 3-phase |
Shipping Weight | 6,050 lbs. |
Distance Between Centers | 80 inch |
Shipping Dimensions | 121 x 54 x 67 inch |
specifications subject to change without notice |
Models | |
---|---|
PL-1340 | 220V 1PHASE 2 HP PRECISION LATHE. 13 SWING. 39 LENGTH. 1-1/2 BORE |
PL-1640 | 220V 3 PH 7-1/2 HP PRECISION LATHE. 16 SWING. 40 LENGTH |
PL-1860 | 220V 3 PH 7-1/2 HP PRECISION LATHE. 18 SWING 60 LENGTH. 2-3/8 BORE |
PL-2060 | 220V 3 PH 15 HP PRECISION LATHE. 20 SWING 60 LENGTH. 3-1/8 BORE |
PL-2080 | 220V 3 PH 15 HP PRECISION LATHE. 20 SWING 80 LENGTH. 3-1/8 BORE |
CALL 800-458-3687 FOR AVAILABILITY & SHIPPING CHARGES, IF ANY. ** SALE ENDS 11/11/2024
CALL 800-458-3687 FOR AVAILABILITY & SHIPPING CHARGES, IF ANY. ** SALE ENDS 11/11/2024
CALL 800-458-3687 FOR AVAILABILITY & SHIPPING CHARGES, IF ANY. ** SALE ENDS 11/11/2024
ADD TO CART TO FOR FREE SHIPPING
CALL 800-458-3687 FOR AVAILABILITY & SHIPPING CHARGES, IF ANY. ** SALE ENDS 11/11/2024