Baileigh VM-942 Vertical Milling Machine

Baileighs VM-942 milling machine is solidly built with tons of standard options for an economical price. The casting of the machine is forged using Meehanite for extra rigidity meaning, less vibration, offering better tolerances and longer tool life.  The spindle on the head is a robust NST # 40 which offers a better transfer of power from the variable speed transmission, than an R-8 spindle would.

The X, Y and Z axis of the VM-942 milling machine are induction hardened, then surface ground and finally treated with Turcite-B offering a longer and more precise life. All three axis have a power feed that is coupled to a three axis DRO (digital read out).  The J-Head is variable speed producing speeds as low as 60 up to 4200 RPM.

Like all Baileigh milling machines there is a lot of value in this model for a moderate investment that will offer the machinist decades of service.

Specifications
Model	VM-942
Table Size (L/W)	42 in / 9 in
Table Load Capacity	770 lbs
T-slot Size	3 at .625 in
Travel - Manual X-axis	30 in
Travel - Manual Y-axis	12 in
Travel - Manual Z-axis	16 in
Travel - Auto X-axis	28.5 in
Travel - Auto Y-axis	12 in
Travel - Auto Z-axis	16 in
Spindle Taper	NST #40
Spindle Speed	60 - 4200 rpm
Spindle Feed Per Rev.	.0015 in / .003 in / .006 in
Spindle Diameter	3.37 in
Spindle Head Swivel	45 deg. (F&R) 90 deg(R&L)
Spindle Travel	5 in
Spindle Nose to Table (min/max)	0 - 16 in
Spindle Center to Column (min/max)	0 - 12 in
Cross Travel of Ram	12 in
Motor Spindle	3 hp
Motor Coolant Pump	1/8 hp
Power Requirement	220v / 1 phase
Shipping Dimensions	60 in /60 in / 75 in
Shipping Weight	2200 lbs

There are no listed accessories.