Semi-Automatic Dual Mitering Horizontal Band Saw BS-24SA-DM
Made in Taiwan
Horizontal and Vertical Band Saw Catalog
Need a little more capacity than the BS-20SA-DM, but want to keep all the great features? Enter the BS-24SA-DM. Baileigh Industrial took many of the
ideas that were already in place with the BS-20 series band saws and applied them to the BS-24 series.
The BS-24SA-DM is a dual mitering semi automatic bandsaw with the capability to miter 60 degrees left and right with its swivel head. But even though it can
miter both ways capacity was not sacrificed. The BS-24SA-DM can cut a full 18 round at 90 degrees and has a 15 x 24 inch rectangle capacity as well.
The 220 Volt three phase BS-24SA-DM requires a 1-1/2 inch band saw blade, making it very accurate and fast cutting. The BS-24SA-DM is also variable speed
allowing for infinite blade speed adjustments for 106 to 317 feet per minute. This allows the user to fine tune the proper speed for different materials like mild steel, bronze or
aluminum.
The hydraulic descent pressure can be adjusted by the operator achieving faster cut times and longer blade life, depending on what material the operator is cutting.
The return position of the metal cutting head can be altered to achieve faster cycle times between cuts, when cutting smaller dimensioned pieces.
Baileigh Industrial horizontal band saws are built to the highest quality standards on the market and will offer any fabrication or machine shop decades of
precision sawing. Call a representative to find out more about this and all the other band saws we offer.
|
Specifications
|
|
Model
|
BS-24SA-DM
|
|
Return
|
Hydraulic
|
|
Miter Adjustment
|
Dual Miter Swivel Head
|
|
Miter Angle
|
0 - 60 degree Left and Right
|
|
Motor
|
5 hp
|
|
Table Height
|
31.5 inch
|
|
Capacity Round 45 degree
|
17.5 inch
|
|
Capacity Round 90 degree
|
18.1 inch
|
|
Capacity Rectangle 90 degree
|
17 x 24 inch
|
|
Capacity Round 90 x 45 x 60 degree
|
18 x 15.7 x 11 inch
|
|
Capacity Square 90 degree
|
18.1 inch
|
|
Blade Guide
|
Carbide x Roller
|
|
Blade Size (H x W x L)
|
1.5 x .051 x 209.84 inch
|
|
Blade Speed (fpm)
|
106 - 317
|
|
Descent Control
|
Pressure Assist Hydraulic
|
|
Drive
|
Belt x Pulley
|
|
Power
|
220 Volt Three Phase
|
|
Shipping Weight
|
3234 lbs.
|
|
Shipping Dimensions
|
111.4 x 44.9 x 73.2 inch
|
specifications subject to change without notice.
B-COOL
B-COOL5
Looking for a good bio-degradable cutting fluid for your saws? We think we have what is the best, Code named B-Cool, this is the first saw coolant good
enough for Baileigh Industrial to sell. B-Cool is a flood coolant formulated to assist in most metal cutting and machining operations on ferrous, non-ferrous and specialty alloys. B-Cool
cutting fluid is non-chlorine, non-sulfur, non-phenol and non-nitrate based formula. Unlike other cutting fluids on the market Baileigh Industrial's B-Cool is a non-petroleum based product
formulated with bio-degradable ingredients making cleanup a breeze.
Available in both 1 and 5 gallon quantities, B-Cool saw coolant will last longer than others on the market as well. It has a 20-1 mixing ratio, meaning more coolant for the money. The
results of this cutting coolant have been superior and have allowed Baileigh Industrial to feel comfortable putting our name on it. B-Cool is designed for any machine that uses a flood
coolant system for cooling.
American Made Band Saw Blades
We have been manufacturing band saw blades sine 1926!
Order custom bandsaw blades here - We have
been manufacturing Since 1926!
