Lock Former Pittsburgh Machine LF-20
Made in Taiwan
HVAC shops demand a lot out of their equipment, so when Baileigh Industrial developed the LF-20 Pittsburgh machine, they knew it had to be able to last. The LF-20 Pittsburgh machine is made from only the highest quality components which include an all steel forming head and hardened with ground shafts. The steel forming rolls on this Pittsburgh machine are case hardened using matching cut gears and needle bearings throughout for years of use and abuse.
Running on 220 volt single phase power the Baileigh Industrial LF-20 is great for making Pittsburgh joints on sheet metal up to 20 gauge . Using approximately 1 inch of material for each lock, the LF-20 has pocket depth ranges from 5/16 inch to 3/8 inch, so material waste is kept to a minimum.
The LF-20 lock former from Baileigh Industrial also has other attachments available, each creating a unique joint. These optional attachments are double seam, drive cleat, flange attachment, and right angle. This do it all is a must in any shop. Give a Representative a call today for information on this or any other machine in their lineup.
|Depth Of Pocket Adjustable||.314 up to .375 inch|
|Power||220V / 1-phase|
|Shipping Weight||320 lbs.|
|Shipping Dimensions||60 x 44 x 68 inch|
|specifications subject to change without notice|
|Double Seam Rolls||Drive Cleat Rolls||Flange Attachment||Right Angle Rolls|
|Capacity||20-26 GA||20-26 GA||20-26 GA||20-26 GA|
|Approx. Material Used||1 in (25mm)||2-1/8 in (54mm)||up to 3/16 in (5mm)||up to 3/8 in (9.5mm)|
|Size||3/8 in Seam (9.5mm)||1-1/8 in Width (28mm)||up to 3/16 in Height (5mm)||up to 3/8 in Height (9.5mm)|
EXCLUSIVE BROTHER-IN-LAW SPECIAL CALL 800-458-3687 X1 FOR MORE DETAILS ** LIMITED TIME OFFER