Plate Roll PR-613
Made in Taiwan
The PR-613 plate roll from Baileigh Industrial is just what every HVAC shop is looking for. It has the ability to roll 13 gauge mild steel over its full 6ft length to a minimum diameter of 7-1/8 inch. All three rolls of the PR-613 are hydraulically driven by a 220 volt three phase 2 hp motor. By having all three rolls hydraulically driven this will increase the efficiency of the finished product. The back roll on the PR-613 plate roll is also controlled by the hydraulic system and has a digital position indicator, so the operator knows exactly where the roll is at all times.
To ensure accuracy of the rolls during the forming process the frame on the PR-613 is made from plate steel. These pieces of steel frame work are integrated and fully welded to reduce and virtually eliminate any flexing that can occur at full capacity.
The PR-613 plate roll uses a control pedestal for some of the bending functions; forward, reverse, up, and down. Coning on the PR-613 is not a problem at all. An independent control box allows the operator to raise or drop one side of the back roll for accurate coning. To ensure operator safety, we have included dual emergency stop cables that are located on both the back and front of the machine. For more information on the PR-613, contact a representative today.
|Roll Speed||5.85 rpm.|
|Upper Roll Dia.||4.75 inch|
|Roll Adjustment Back||Hydraulic|
|Minimum Forming Dia||7.125 inch|
|Capacity (Mild Steel)||13 ga. (.090 inch)|
|Forming Width||72 inch|
|Power||220V / 3-phase|
|Shipping Weight||4,950 lbs.|
|Shipping Dimensions||112 x 30 x 50 inch|
220V 3PHASE HYDRAULIC PLATE ROLL. 6 LENGTH 13 GAUGE MILD STEEL CAPACITY - MADE IN TAIWAN (WEIGHT = 4950 LBS)
CALL 800-458-3687 EXT 1 FOR OUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS ITEM
Mfg. item #: PR-613
lease to own for as little as:$350 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1