Technical Sales 1–800–458–3687

Baileigh Drill Press

DP-0625E Drill Press DP-1000E Belt Driven Drill Press DP-1000VS Variable Speed Drill Press DP-1200VS Variable Speed Drill Press
DP-0625E
Drill Press
DP-1000E
Belt Driven Drill Press
DP-1000VS
Variable Speed Drill Press
DP-1200VS
Variable Speed Drill Press
DP-1250VS-HS High Speed Drill Press DP-1250VS Drill Press DP-1400VS Variable Speed Drill Press DP-1500VS Variable Speed Drill Press
DP-1250VS-HS
High Speed Drill Press
 DP-1250VS
Drill Press
DP-1400VS
Variable Speed Drill Press
DP-1500VS
Variable Speed Drill Press
DP-1000G Gear Driven Drill Press DP-1500G Drill Press DP-1850G Gear Driven Drill Press  Floor Drill Press DP-2012F-HD-V2
DP-1000G
Gear Driven Drill Press
DP-1500G
Drill Press
DP-1850G
Gear Driven Drill Press
DP-2012F-HD
Floor Drill Press

 

 DP-0625E Drill Press

 DP-0625E Drill Press

This economical belt driven drill press runs smoothly even at full capacity - this 14 inch drill press lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.

Features:

  • .5 hp motor requires 110 volt power and will work at any shop or site.
  • Belt driven head drills a maximum capacity of 5/8” steel.
  • 5 speeds in the range from 250 to 2900 rpm to suit your application.
  • 2-7/8 inch steel column eliminates flexing even when drilling at full capacity.
  • Rigid cast iron base and table add strength to the drill’s structure.
  • Includes a safety shield around the drill head to protect you.
  • Baileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone from our experienced team.
Specifications
Item Number DP-0625E
Spindle Speeds 5
Swing 14 inch
Diameter of Column 2-7/8 inch
Base Size 25-3/4 x 16-1/2 inch
Table Size 11 x 11 inch
Quill Diameter 1-3/4 inch
Spindle Nose to Table 6 inch Min to 36 inch Max
Spindle Nose to Base 48 inch
Spindle Taper B16
Table Angle Adj 360 deg
Main Motor 1/2 hp
Rpm 250, 700, 1150, 1900, and 2900
Drill Capacity Steel 5/8 inch
Power 110 Volt
Shipping Weight 240lbs
Special Notes Includes B-16 1-16mm Keyless Chuck
Shipping Dimensions (Inches) 69x44x23

 

DP-1000E Belt Driven Drill Press

DP-1000E Belt Driven Drill Press

This economical belt driven drill press runs smoothly even at full capacity - the DP-1000E is a 15-1/2 inch drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.

Features:

  • .5 hp motor requires 110 volt power and will work at any shop or site.
  • Belt driven head drills a maximum capacity of 1” steel.
  • 5 speeds in the range from 250 to 2900 rpm to suit your application.
  • 3-1/8 inch steel column eliminates flexing even when drilling at full capacity.
  • Rigid cast iron base and table add strength to the drill’s structure.
  • Includes a safety shield around the drill head to protect you.
  • Baileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone from our experienced team.
Specifications
Item Number DP-1000E
Swing 15-1/2 inch
Diameter of Column 3-1/8 inch
Spindle Travel 3 inch
Base Size 23 x 16 inch
T-Slot Width 1/2 inch
Table Size 12-1/2 x 12-1/2 inch
Speeds 5
Quill Diameter 2 inch
Spindle Nose to Table 5-1/2 Min. To 35-1/2 inch Max.
Spindle Nose to Base 47-1/2 inch
Spindle Taper MT2
Table Angle Adj 360 deg
Main Motor 1/2 hp
Rpm 250, 700, 1150, 1900, and 2900
Drill Capacity Steel 1 inch
Power 110 Volt
Shipping Weight 290lbs
Special Notes B-16 1-16mm Keyless Chuck, MT2 to B16 Arbor, Drift Key
Certification CE
Shipping Dimensions (Inches) 60x44x21

 

Baileigh Drill Press Variable Speed DP-1000VS

Baileigh Drill Press Variable Speed DP-1000VS

Made in Taiwan

16 inch Drill Press Machine The DP-1000VS variable speed drill press has a very wide column to eliminate flexing when drilling at full capacity.  The base and table are made from a very rigid casting adding to the strength of this 1 inch maximum capacity drilling machine. The inverter driven head allows the machinist or fabricator to run tooling at the proper speed for each drill or tap size available.  Running at the exact speed extends tooling life, something that can't be accomplished on other drills like pulley driven styles.   The DP-1000VS drill press also comes standard with a coolant system, guarding and a halogen light. To find out more information about our variable speed drill presses, please call a representative.

Specifications
Model DP-1000VS
Quill Diameter 2.44 inch
Spindle Nose to Table 23.8 inch
Spindle Nose to Base 45.3 inch
Spindle Speed 150 – 3000 rpm
Spindle Taper MT 3
Table Slot .625 inch
Tapping Capacity Cast Iron 3/4 inch
Table Size 18.1 x 14.2 inch
Tapping Capacity Steel 5/8 inch
Main Motor 2 hp
Drill Capacity Cast Iron 1.25 inch
Drill Capacity Steel 1 inch
Power 220V Single Phase
Shipping Weight 579 lbs.
Spindle Travel 5.3 inch
Column Diameter 3.62 inch
Base Dimensions L x W 27 x 19 inch
Shipping Dimensions 32 x 24 x 79 inch

 

 Variable Speed Drill Press DP-1200VS

 Variable Speed Drill Press DP-1200VS

Built to last for years, the DP-1200VS floor drill press is an economical option for any shop. With a 22 inch swing, this variable-speed drill press will prove an ideal investment for any machinist or fabricator.

Features:

  • 2 hp motor runs on just 220 volts of single-phase power.
  • Tackles a maximum drilling capacity of 1-1/16 inch mild steel.
  • Heavy duty spindle transfers power to the #3 Morse taper tooling .
  • Speed potentiometer dial controls powerful inverter-driven head.
  • Variable drilling speed, ranging from 10 to 2250 rpm, lets you choose the right setting to suit your application.
  • Digital readout displays actual spindle rpm, ensuring precise results time after time.
  • Features an auto-reversing tap function with up to .1/2 inch capacity.
  • Wide column provides extra support and rigidity to reduce flexing even during the toughest drilling sessions.
  • Base and 16-3/4 x 19 inch table are made of a heavy iron casting to increase rigidity.
  • Very large .625 inch T-slots let a vise or fixture securely hold your material.
  • Movable coolant system, with magnetic fixture, sprays out where you need it to extend drill bit and tap lifespan.
  • Covered by a 1-year parts warranty and lifetime technical support by phone from Baileighs team of experienced reps.
Specifications
Item Number DP-1200VS
Country of Manufacture Taiwan
Swing 20.8 inch
Diameter of Column 4 inch
Distance Between Spindle Nose and Base 1-1/4 Min. / 23-1/2 inch Max.
Base Size 25-3/4 x 16-1/2 inch
Table Size 16-3/4 x 19 inch
Quill Diameter 3 inch
Stroke 6 inch
Spindle Nose to Table 36.41 inch
Spindle Nose to Base 44-1/2 inch
Spindle Speed 10-2,250 RPM
Spindle Taper MT3
Table Slot .625 inch
Tapping Capacity 1/2 inch
Main Motor 2 hp
Drill Capacity Steel 1-1/16 inch
Power 220V / 1-phase
Shipping Weight 650lbs
Drill Capacity 1.25 inch
Spindle Travel 5.9 inch
Column Diameter 4.52 inch
Shipping Dimensions (Inches) 60x44x82

 

High Speed Drill Press DP-1250VS-HS

High Speed Drill Press DP-1250VS-HS

Looking to upgrade your current drill? This variable-speed drill press includes all the features of Baileighs DP-1250VS but rotates at speeds above 3000 rpm which is perfect for thermal friction drilling (tooling not included).  This process lets the drill bit melt through the material and creates walls that can then be tapped.

Features:

  • 2 hp motor runs on 220-volt single-phase power.
  • Wide 20 inch swing.
  • High speed drill press handles a maximum capacity of 1.25 inch mild steel.
  • Includes quality auto-reversing tapping feature with a capacity of .75 inch mild steel.
  • Efficient Delta inverter drives the mighty #4 Morse taper spindle and regulates the amount of power and rpms to the spindle.
  • Variable speed range from 100 to 4000 rpm lets you select the optimal setting for your application.
  • Inverter lets you set the rpm to your desired speed within the continuous range instead of just a few settings.
  • Machined, polished worktable offers large .625 inch T-slots for your work-holding device.
  • 4.5 inch wide column minimizes flex and maintains accuracy.
  • Heavy-duty cast iron base has a built-in coolant system to extend tooling life.
  • Automatic tool ejector make it easy to adjust the drill press for a given project.
  • Protective spindle shield with limit switch keeps you and your shop safe.
  • Comes standard with a halogen work light to help you get the job done under dark conditions.
  • Baileigh backs this high speed drill press with a 1-year parts warranty plus our unbeatable lifetime technical support.
Specifications
Item Number DP-1250VS-HS
Country of Manufacture Taiwan
Motor 2 hp
Quill Diameter 2.95 inch
Spindle Nose to Table 36.41 inch
Spindle Nose to Base 48.22 inch
Spindle Speed High 540 - 4000 rpm
Spindle Speed Low 85 - 540 rpm
Spindle Taper MT 4
Table Slot .625 inch
Tapping Capacity 3/4 inch
Motor Coolant 1/8 hp
Power 220V / 1-phase
Shipping Weight 865lbs
Swing 20.8 inch
Drill Capacity 1.5 inch
Spindle Travel 5.9 inch
Column Diameter 4.52 inch
Base Dimensions L x W 27 x 19 inch
Shipping Dimensions (Inches) 60x44x79

 

Baileigh Drill Press DP-1250VS

Baileigh Drill Press DP-1250VS

Made in Taiwan

20 inch Heavy Duty Drill Press Baileighs DP-1250VS heavy duty drill press has a wide column for extra support to reduce flexing during heavy drilling sessions at maximum capacity, being 1-1/4 inch diameter mild steel.  This machine has a powerful inverter driven head that is controlled through a speed potentiometer dial and digital read out for displaying actual quill RPM. This variable speed drill press uses a heavy # 4 Morse Taper to transfer the power from the spindle to the quill.  To further the rigidity the base and table are made of a heavy casting with very large T-Slots to secure vise or material.  The base includes a powerful coolant system that is sprayed out at the quill behind a quality splash and safety guard.  The coolant system increases drill bit and tap life. This heavy duty, variable speed, floor drill press is commonly in stock for quick shipments. It offers any machinist or fabricator a great value for the investment.  If you have additional questions please don't hesitate to call.

Specifications
Model DP-1250VS
Quill Diameter 2.95 inch
Spindle Nose to Table 36.41 inch
Spindle Nose to Base 48.22 inch
Spindle Speed High 245 – 2000 rpm
Spindle Speed Low 85 – 540 rpm
Spindle Taper MT 4
Table Slot .625 inch
Tapping Capacity 3/4 inch
Table Size 22 x 18.5 inch
Main Motor 2 hp
Power 220V / 1-phase
Shipping Weight 847 lbs.
Swing 20.8 inch
Drill Capacity 1.5 inch
Spindle Travel 5.9 inch
Column Diameter 4.52 inch
Base Dimensions L x W 27 x 19 inch
Shipping Dimensions 40 x 25 x 83 inch

 

DP-1400VS Variable Speed Drill Press

DP-1400VS Variable Speed Drill Press

Built using the finest components, the DP-1400VS floor drill press draws strength from its sturdy base and column that wont flinch during the heaviest drilling sessions. With a unique table that pivots 360 degrees, this variable-speed drill press will prove an ideal investment for any machinist or fabricator.

Features

  • 2 hp motor runs on just 220 volts of single-phase power.
  • Tackles a maximum drilling capacity of 1.25 inch mild steel.
  • Heavy duty spindle transfers power to the #3 Morse taper tooling .
  • Speed potentiometer dial controls powerful inverter-driven head.
  • Variable drilling speed, ranging from 80 to 2500 rpm, lets you choose the right setting to suit your application.
  • Digital readout displays actual spindle rpm, ensuring precise results time after time.
  • Features an auto-reversing tap function with up to .625 inch capacity.
  • Wide column provides extra support and rigidity to reduce flexing even during the toughest drilling sessions.
  • Base and 25.5 x 17.75 inch table are made of a heavy iron casting to increase rigidity.
  • Very large .511 inch T-slots let a vise or fixture securely hold your material.
  • Coolant system, stored in the base, sprays out at the end of the spindle behind the splash and safety guard to extend drill bit and tap lifespan.
  • Covered by a 1-year parts warranty and lifetime technical support by phone from a team of experienced reps.
Specifications
Item Number DP-1400VS
Country of Manufacture Taiwan
Spindle Travel 5.9 inch
Table Size 18-3/4 x 12-1/4 inch
Quill Diameter 2.44 inch
Spindle Nose to Table 28-1/2 inch
Spindle Nose to Base 44-3/4 inch
Spindle Speed High 230 - 2500 rpm
Spindle Speed Low 80 - 1000 rpm
Spindle Taper MT 3
Table Slot .551 inch
Tapping Capacity 5/8 inch
Table Angle Adj 360 deg
Main Motor 2 hp
Power 220V / 1-phase
Shipping Weight 710lbs
Special Notes Includes integrated table vise
Swing 18 inch
Drill Capacity 1.25 inch
Column Diameter 4 inch
Base Dimensions L x W 7.75 x 25.5 inch
Shipping Dimensions (Inches) 60x44x88

 

Variable Speed Drill Press DP-1500VS

Variable Speed Drill Press DP-1500VS

Made in Taiwan

20 inch Drill Press Machine Baileigh model DP-1500VS heavy duty drill press comes standard with power feed and a quality auto reversing tap feature.  This is a quality made machine using only the best quality castings and base metals to support rigidity when drilling at maximum capacity with the power down feed. The base and drill table is made from a heavy casting that has oversized T-Slots for secure clamping of a vise or fixture. This variable speed drill press has an inverter driven head whose quill speed can be properly adjusted to each different drill size that really will extend tooling life. Adjustments to the speed can be done by a speed potentiometer dial, noting the RPM is displayed on the digital read out. Additional standard features of this quality floor type drill press are a safety guard with limit switch, a powerful coolant system, and a bright halogen light.  To find out more about this quality product, please feel free to speak with one of our trained representitives.

Specifications
Model DP-1500VS
Quill Diameter 2.95 inch
Quill Feed .0078, .004, .002 inch per rev.
Spindle Nose to Table 22.75 inch
Spindle Nose to Base 40.75 inch
Spindle Speed High 245 – 2000 rpm
Spindle Speed Low 65 - 540 rpm
Spindle Taper MT 4
Table Slot .625 inch
Tapping Capacity .937 inch
Table Size 22 x 18.5 inch
Main Motor 2 hp
Drill Capacity Cast Iron 1.75 inch
Drill Capacity Steel 1.5 inch
Power 220V Single Phase
Shipping Weight 902 lbs.
Spindle Travel 5.9 inch
Column Diameter 4.52 inch
Base Dimensions L x W 27 x 19 inch
Shipping Dimensions 40 x 25 x 83 inch

 

Gear Driven Drill Press DP-1000G

Gear Driven Drill Press DP-1000G

Equipped to run at 4 different speeds, the gear-driven drill press is as versatile as it is tough. For an economical price, you can add this drill built to Baileighs exacting quality standards to your shop

  • 1.5 hp motor requires 110 volts of power and will run in any fabrication or machine shop.
  • Maximum capacity of up to 1 inch mild steel.
  • Transmission offers multiple speeds (125, 420, 535, and 1740 rpm) for drilling and tapping an array of different materials.
  • Sturdy 4 inch diameter column reduces flexing to ensure accurate results.
  • You can easily adjust the gear head up or down on the column.
  • Comes standard with a heavy cast iron base and adjustable table.
  • Includes a protective guard around the spindle for your safety.
  • Bright halogen work light bends to provide visibility where you need it.
  • Baileigh covers this drill press with a 1-year warranty plus lifetime technical support by phone.
Specifications
Item Number DP-1000G
Table Size 19.75 x 13.75 inch
Motor 1.5 hp
Spindle Speed 125, 420, 535, 1740 rpm
Spindle Taper MT 3
Tapping Capacity 5/8 inch
Power 110V
Shipping Weight 484 lbs.
Drill Capacity 1 inch
Spindle Travel 5.3 inch
Base Dimensions L x W 15.5 x 19.5 inch
Shipping Dimensions 66 x 22 x 28 inch
specifications subject to change without notice

 

Gear Driven Drill Press DP-1500G

Drill Press DP-1500G

With a cast iron base and a sturdy steel column, this 20 inch DP-1500G gear-driven drill press offers the rigid strength you need for heavy drilling jobs.

Feautres:
  • 3.5 hp motor runs on 220 volt 3-phase power.
  • Drills a maximum capacity of 1.5 inch mild steel.
  • Includes an auto tapping feature with a 1.3 inch capacity.
  • Variable-speed drill press lets you select the correct setting for a project within the continuous range of 108 to 1800 rpm.
  • Standard #4 Morse taper transfers power from the gear head to the material.
  • Cast iron base and mighty 5.5 inch diameter steel column eliminate flexing for heavy feeds at max capacity.
  • 20 x 16 inch table features large T-slots for a vise or fixture to hold material securely.
  • Includes a chuck, coolant system and a flexible halogen work light as standard features, not upgrades.
  • Protective shield around drill head keeps you and your shop safe.
  • Baileigh backs this heavy-duty drill press for sale with a 1-year parts warranty. You can also count on our team for technical support by phone over the machine’s lifetime of use.
Specifications
Item Number DP-1500G
Table Size 20 x 16 inch
Motor 3.5 hp
Spindle Speed 108 - 1800 rpm
Spindle Taper MT 4
Tapping Capacity 1.3 inch
Power 220V / 3-phase
Shipping Weight 990lbs
Drill Capacity 1.5 inch
Spindle Travel 7.48 inch
Base Dimensions L x W 19.5 x 28 inch
Shipping Dimensions (Inches) 86x23x37

 

Gear Driven Drill Press - DP-1850G

Gear Driven Drill Press - DP-1850G

The DP-1850G drill press harnesses a lot of power for its price. This gear driven drill press can handle those bigger, tougher jobs at your fabrication or machine shop.

Features:

  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4 inch swing to tackle large pieces of material.
  • Drills a maximum capacity of 1.57 inch with a tapping capacity of up to 1 inch
  • Gear head turns at speeds between 90 and 2425 rpm, so you can select the right speed for almost any application.
  • #4 Morse spindle taper feed is electric and completely adjustable.
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity.
  • 21-1/4 x 17-1/4 inch work table with X-pattern T-Slots.
  • .7 inch table-slots allow for a vise or fixture to get a firm hold on the material.
  • Includes an electronic power-down feed and a coolant system to prolong the drill’s lifetime of use.
  • Equipped with a chuck and an automatic tool ejector to adapt to your project quickly and easily.
  • Comes standard with a protective shield and a halogen light for safer drilling in your shop and elsewhere.
  • Baileigh covers this gear-driven drill press with a 1-year parts warranty plus our unbeatable lifetime technical support by phone.
Specifications
Item Number DP-1850G
Spindle Speeds 12
Max. Drill Capacity 1.57 inch
Max. Tapping Capacity 7/8 inch
Swing 26-3/4 inch
Distance from Spindle to Table 4 to 24-3/8 inch
Distance from Spindle to Base 47 inch
Spindle Taper MT-4
Spindle Travel 7-3/4 inch
Spindle Speed Range 90-2,425 RPM
Power Feed .0047 inch, .0094 inch, .0157 inch
Table Size 17-1/4 x 21-1/4 inch
Base Size 33 x 25 inch
T-Slot Width .7 inch
Motor 2 hp
Power 220V 3-phase
Shipping Weight 1225lbs
Shipping Dimensions (Inches) 60x44x90

 

floor drill press

Floor Drill Press DP-2012F-HD-V2

Need more capacity from your drill press, well look at the DP-2012F-HD-V2 floor frill press to see if it will fit your needs. This mammoth has a 20 inch swing and a cast iron 16.5 x 18.5 inch oversized table and can handle just about anything that you can throw at it. The 3.6 inch diameter column and 24 x 16.5 inch cast iron base makes for one rigid structure.

The DP-2012F-HD-V2 uses 110 volts to turn its MT4 spindle to 3,200 rpms. The range of speeds is done through the sue of six pulleys that give the DP-2012F-HD-V2 12 spindle speeds. It also includes a drill chuck that can open to a maximum of 3/4 inch. For more information on the DP-2012F-HD-V2 or any other Baileigh Industrial equipment, call and speak to a representative today.

 

Specifications
Iten Number DP-2012F-HD-V2
Spindle Speeds 12-220 to 3,200 rpm
Distance from Spindle to Table 26 inch
Distance from Spindle to Base 46.75 inch
Table Size (lenght) 16.5 inch
Table Size (width) 18.5 inch
Swing 20 inch
Spindle MT4
Drill Capacity 1.25 inch
RPM 150 - 4,200
Spindle Travel 4.75 inch
Drill Chuck Capacity 1/32 - 5/8 inch (JT3 key)
T-Slot Size 3 at 5/8 inch
Power 110v
Lenght 35.4 inch
Width 25.6 inch
Heigh 66.7 inch
Horse Power 2 hp
Weight (lbs) 259

Floor Drill Press DP-2012F-HD-V3

Need more capacity from your drill press, well look at the DP-2012F-HD-V3 floor frill press to see if it will fit your needs. This mammoth has a 20 inch swing and a cast iron 16.5 x 18.5 inch oversized table and can handle just about anything that you can throw at it. The 3.6 inch diameter column and 24 x 16.5 inch cast iron base makes for one rigid structure.

The DP-2012F-H3-V3 uses 200 volts single phase to turn its MT4 spindle to 3,200 rpms. The range of speeds is done through the sue of six pulleys that give the DP-2012F-HD-V3 12 spindle speeds. It also includes a drill chuck that can open to a maximum of 3/4 inch. For more information on the DP-2012F-HD-V3 or any other Baileigh Industrial equipment, call and speak to a representative today.

Specifications
Iten Number DP-2012F-HD-V3
Spindle Speeds 12-220 to 3,200 rpm
Distance from Spindle to Table 26 inch
Distance from Spindle to Base 46.75 inch
Table Size (lenght) 16.5 inch
Table Size (width) 18.5 inch
Swing 20 inch
Spindle MT4
Drill Capacity 1.25 inch
RPM 150 - 4,200
Spindle Travel 4.75 inch
Drill Chuck Capacity 1/32 - 5/8 inch (JT3 key)
T-Slot Size 3 at 5/8 inch
Power 220v Single Phase
Lenght 35.4 inch
Width 25.6 inch
Heigh 66.7 inch
Horse Power 2 hp
Weight (lbs) 259

 

There are no listed accessories.

DP-0625E
110 VOLT POLY-V BELT METAL DRILL PRESS, MANUAL FEED, 5/8 MILD STEEL DRILLING, 1/4 TAPPING
Mfg. item #: DP-0625E
BAIDP-0625E
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,034.05

25
DP-1000E
110 VOLT POLY-V BELT METAL DRILL PRESS, MANUAL FEED, 1 MILD STEEL DRILLING, 3/8 TAPPING
Mfg. item #: DP-1000E
BAIDP-1000E
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,317.35

25
DP-1000VS
220 VOLT SINGLE PHASE INVERTER DRIVEN DRILL PRESS. MANUAL FEED. 1 MILD STEEL DRILLING CAPACITY.
Mfg. item #: DP-1000VS
BAIDP-1000VS
lease to own for as little as:$59 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,971.35

25
DP-1200VS
220V 1 PHASE VARIABLE SPEED (VFD) DRILL PRESS. MANUAL FEED. 1-1/16 MILD STEEL (1-1/4 CAST IRON).
Mfg. item #: DP-1200VS
BAIDP-1200VS
lease to own for as little as:$71 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,549.90

25
DP-1250VS-HS
220 VOLT SINGLE PHASE INVERTER DRIVEN HIGH SPEED DRILL PRESS. 1-1/4 MILD STEEL DRILLING CAPACITY
Mfg. item #: DP-1250VS-HS
BAIDP-1250VS-HS
lease to own for as little as:$103 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$5,132.16

25
DP-1250VS
220 VOLT 1 PHASE INVERTER DRIVEN DRILL PRESS. MANUAL FEED. 1-1/4 MILD STEEL DRILLING CAPACITY.
Mfg. item #: DP-1250VS
BAIDP-1250VS
lease to own for as little as:$76 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,823.32

25
DP-1400VS
220 VOLT 1 PHASE INVERTER DRIVEN DRILL PRESS, INTEGRATED VISE, TAPPING, 1-1/4 MILD STEEL CAPACITY
Mfg. item #: DP-1400VS
BAIDP-1400VS
lease to own for as little as:$85 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$4,230.99

25
DP-1500VS
220 VOLT 1 PHASE INVERTER DRIVEN DRILL PRESS. 3 SPEED POWER DOWN FEED. 1-1/2 MILD STEEL CAPACITY.
Mfg. item #: DP-1500VS
BAIDP-1500VS
lease to own for as little as:$90 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,501.34

25
DP-1000G
110 VOLT GEAR DRIVEN DRILL PRESS. MANUAL FEED. 1 MILD STEEL DRILLING CAPACITY.
Mfg. item #: DP-1000G
BAIDP-1000G
lease to own for as little as:$59 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,971.35

25
DP-1500G
220 VOLT THREE PHASE GEAR DRIVEN DRILL PRESS. POWER FEED. 1-1/2 MILD STEEL DRILLING CAPACITY.
Mfg. item #: DP-1500G
BAIDP-1500G
lease to own for as little as:$88 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,411.23

25
DP-1850G
220 VOLT THREE PHASE GEAR DRIVEN DRILL PRESS. POWER FEED, COOLANT SYSTEM, MT4 SPINDLE, CSA
Mfg. item #: DP-1850G
BAIDP-1850G
lease to own for as little as:$142 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$7,114.74

25
DP-2012F-HD-V2
110V 20 FLOOR DRILL PRESS 12 SPINDLE SPEEDS, 16.5X18.5 TABLE MT4 (REQUIRES DEDICATED 20A CIRCUIT)
Mfg. item #: DP-2012F-HD-V2
BAIDP-2012F-{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,128.48

25
DP-2012F-HD-V3
220V SINGLE PHASE 20 FLOOR DRILL PRESS 12 SPINDLE SPEEDS, 16.5X18.5 TABLE MT4, LED WORK LIGHT
Mfg. item #: DP-2012F-HD-V3
BAIDP-2012F-{01
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,128.48

25
Copyright © 2020 Smith-Hamilton, Inc
0.013 200504 10:55