Hydraulic Press HSP-66M
Made in Poland
The HSP-66M is the first in our line of motorized h-frame presses. This heavy duty press is built using only the best quality components and craftsmanship. A fully welded 3/8 inch plate steel frame will take more than the 66 tons that the industrial grade hydraulic system can throw at it. Weighing in at just over 1500 pounds, you know that this press is made to last.
The robust 2 hp 220 volt three phase motor has two working speeds; a rapid descent speed and a slow approach speed. There is also an option for the operator to use a hand pump for even more control. Once the job is done the HSP-66M h-frame press has an automatic cylinder return.
The table on the HSP-66M is nothing short of remarkable. Fabricated to exacting tolerances, the table features two support pins that are 2 inch in diameter and allow the table to be locked in at the correct working height. The HSP-66M also includes lifting chains to help with the placement of the table.
Other features of the HSP-66M h-frame press include a pressure regulator, ram cap, chrome piston, head screw, and a cylinder that is moveable left or right within the framework itself. Contact a representative for more information.
Specifications | |
---|---|
Model | HSP-66M |
Return Speed | .5 inch / sec. |
Maximum Pressure | 3408 psi |
Motor | 2 hp |
Piston Head Diameter | 3.94 inch |
Pump Speed | .871 / 3.619 / gal/min. |
Oil Capacity | 7.92 gal |
Working Speed | .086 inch / sec. |
Working Width | 29.52 inch |
System Oil Capacity | 2.11 gal |
Lowering Speed | .362 inch / sec. |
Maximum Capacity | 66 tons |
Cylinder Stroke | 15.75 inch |
Cylinder Movable | Yes |
Cylinder Diameter | 8.26 inch |
Rpm | 3000 |
Power | 220V / 3-phase |
Shipping Weight | 1,507 lbs. |
Shipping Dimensions | 60 x 40 x 81 inch |
Set of V blocks