DAKE Elec-Draulic II Hydraulic Presses

HYDRAULIC PRESSES - ELEC-DRAULIC II-DOUBLE ACTING
908025-2	8-025	25-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908050-2	8-050	50-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908075-2	8-075	75-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908080-2	8-080	75-ton Elec-Draulic II Press, 220/440-3 ph 10HP
908150-2	8-150	150-ton Elec-Draulic II Press, 220/440-3 ph 10 HP
908025-4	8-025	25-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908050-4	8-050	50-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908075-4	8-075	75-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908080-4	8-080	75-ton Elec-Draulic II Press, 220/440-3 ph 10HP
908150-4	8-150	150-ton Elec-Draulic II Press, 220/440-3 ph 10 HP
908025	8-025	25-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908050	8-050	50-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908075	8-075	75-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908080	8-080	75-ton Elec-Draulic II Press, 220/440-3 ph 10HP
908150	8-150	150-ton Elec-Draulic II Press, 220/440-3 ph 10 HP
713510	713510	Remote pressure regulator valve kit.

Elec-draulic II Presses Model 8-025 25 Ton Capacity

The 25 ton electric-hydraulic II dual acting press has an adjustable table, 15 IPM pressing speed and a double-acting cylinder. This series is great for super-sensitive ram control with simple operation.

Features:

Electric operation provides smooth, consistent pressing action
Variable ram speed allows fingertip control of ram movement for precise pressure control
H-frame mounted control allows convenient control of press when workhead is out of operatorâs reach
Adjustable table permits easy vertical movement by means of self-locking hoist
Double-acting cylinder permits pulling as well as pressing ram action
Safety valve protects against overloads
T-ring seals prevent pressure loss
Optional bolt flange for tooling attachment may be substituted for flat ram nose

Standar Equipment

Frame
2 Steel V-Blocks
Flat Ram Nose
Safety Relief Valve
Self-locking Table Hoist
Double Acting Workhead
2 Steel Table Plates
Pressure Gauge

Model Options

Traversing head
Bolt-on Flange Adaptor

Specifications
Model Number	8-025
Part Number	908025
Capacity (tons)	25
Operation	Electric
Horsepower	2
Voltage	220V/440V, 3-Phase
Width Between Uprights (in)	32-3/4
Width Between Table Channels (in)	7-1/4
Minimum Ram To Table (in)	11-3/4
Maximum Ram To Table (in)	46-3/4
Ram Travel (in)	10
Screw Travel (in)	n/a
Horizontal Workhead Travel (in)	n/a
Footprint (in)	43-1/2 x 36
Height (in)	83
Weight (lbs)	1,060
Base (in)	43-1/2 x 36
Ram Advance Speed	n/a
Pressing Speed (in/m)	15
RPM	1,800
Air Pressure	n/a

Elec-draulic II Presses Model 8-050 50 Ton Capacity

The 50 ton electric-hydraulic II dual acting press has a 2 horsepower motor, 8 IPM pressing speed, and is 86 inches tall. The dual acting ram allows for super-sensitive ram control with simple operation.

Features:

Electric operation provides smooth, consistent pressing action
Variable ram speed allows fingertip control of ram movement for precise control
H-frame mounted control allows convenient control of press when workhead is out of operatorâs reach
Adjustable table permits easy vertical movement by means of self-locking hoist
Double-acting cylinder permits pulling as well as pressing ram action
Safety valve protects against overloads
T-ring seals prevent pressure loss

Standar Equipment

Frame
2 Steel V-Blocks
Flat Ram Nose
Safety Relief Valve
Self-locking Table Hoist
Double Acting Workhead
2 Steel Table Plates
Pressure Gauge

Model Options

Traversing head
Bolt-on Flange Adaptor

Specifications
Model Number	8-050
Part Number	908050
Capacity (tons)	50
Operation	Electric
Horsepower	2
Voltage	220V/440V, 3-Phase
Width Between Uprights (in)	32-3/4
Width Between Table Channels (in)	7-1/4
Minimum Ram To Table (in)	10-1/8
Maximum Ram To Table (in)	45-1/8
Ram Travel (in)	10
Screw Travel (in)	n/a
Horizontal Workhead Travel (in)	n/a
Footprint (in)	43-1/2 x 36
Height (in)	86
Weight (lbs)	1,360
Base (in)	43-1/2 x 36
Ram Advance Speed	n/a
Pressing Speed (in/m)	8
RPM	1,800
Air Pressure	n/a

Elec-draulic II Presses Model 8-075 75 Ton Capacity

The 75 ton electric-hydraulic II dual acting press offers a ram pressing speed of 5 IPM, has a 2 horsepower motor, and 44 inches between the uprights. The dual acting ram allows for super-sensitive ram control with simple operation.

Elec-draulic II Presses Model 8-080 75 Ton Capacity

The 75 ton electric-hydraulic II dual acting press offers extra fast pressing power with a 30 IPM pressing speed to cut down on production time. The dual acting ram allows for super-sensitive ram control with simple operation.

Features:

Electric operation provides smooth, consistent pressing action
Variable ram speed allows fingertip control of ram movement for precise control
H-frame mounted control allows convenient control of press when workhead is out of operatorâs reach
Adjustable table permits easy vertical movement by means of self-locking hoist
Double-acting cylinder permits pulling as well as pressing ram action
Safety valve protects against overloads
T-ring seals prevent pressure loss

Standar Equipment

Frame
2 Steel V-Blocks
Flat Ram Nose
Safety Relief Valve
Self-locking Table Hoist
Double Acting Workhead
2 Steel Table Plates
Pressure Gauge

Model Options

Traversing head
Bolt-on Flange Adaptor

Specifications
Model Number	8-075	8-080
Part Number	908075	908080
Capacity (tons)	75	75
Operation	Electric	Electric
Horsepower	2	10
Voltage	220V/440V, 3-Phase	220V/440V, 3-Phase
Width Between Uprights (in)	44	44
Width Between Table Channels (in)	8-1/4	8-1/4
Minimum Ram To Table (in)	7-5/8	7-5/8
Maximum Ram To Table (in)	37-5/8	37-5/8
Ram Travel (in)	10	10
Screw Travel (in)	n/a	n/a
Horizontal Workhead Travel (in)	n/a	n/a
Footprint (in)	55-1/2 x 36	55-1/2 x 36
Height (in)	86	86
Weight (lbs)	1.950	2,100
Base (in)	55-1/2 x 36	55-1/2 x 36
Ram Advance Speed	n/a	n/a
Pressing Speed (in/m)	5	30
RPM	1,800	1,800
Air Pressure	n/a	n/a

Elec-draulic II Presses Model 8-150 150 Ton Capacity

The 150 ton electric-hydraulic II dual acting press offers a ram pressing speed of 17 IPM, has a 10 horsepower motor, and is 95 inches tall. The dual acting ram allows for super-sensitive ram control with simple operation.

Features:

Electric operation provides smooth, consistent pressing action
Variable ram speed allows fingertip control of ram movement for precise control
H-frame mounted control allows convenient control of press when workhead is out of operator’s reach
Adjustable table permits easy vertical movement by means of self-locking hoist
Double-acting cylinder permits pulling as well as pressing ram action
Safety valve protects against overloads
T-ring seals prevent pressure loss

Standar Equipment

Frame
2 Steel V-Blocks
Flat Ram Nose
Safety Relief Valve
Self-locking Table Hoist
Double Acting Workhead
2 Steel Table Plates
Pressure Gauge

Model Options

Traversing head
Bolt-on Flange Adaptor

Specifications
Model Number	8-150
Part Number	908150
Capacity (tons)	150
Operation	Electric
Horsepower	10
Voltage	220V/440V, 3-Phase
Width Between Uprights (in)	48
Width Between Table Channels (in)	12-1/4
Minimum Ram To Table (in)	11-3/4
Maximum Ram To Table (in)	31-3/4
Ram Travel (in)	16
Screw Travel (in)	n/a
Horizontal Workhead Travel (in)	n/a
Footprint (in)	66 x 42
Height (in)	95
Weight (lbs)	3,620
Base (in)	66 x 42
Ram Advance Speed	n/a
Pressing Speed (in/m)	17
RPM	1,800
Air Pressure	n/a


Model 8-025 25 Ton Capacity	Model 8-050 50 Ton Capacity	Model 8-075 75 Ton Capacity	Model 8-080 75 Ton Capacity	Model 8-150 150 Ton Capacity