Technical Sales 1–800–458–3687

DAKE Elec-Draulic II Hydraulic Presses


Click image to enlarge

dake-make-in-the-usa-logo

HYDRAULIC PRESSES - ELEC-DRAULIC II-DOUBLE ACTING
908025-2 8-025 25-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908050-2 8-050 50-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908075-2 8-075 75-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908080-2 8-080 75-ton Elec-Draulic II Press, 220/440-3 ph 10HP
908150-2 8-150 150-ton Elec-Draulic II Press, 220/440-3 ph 10 HP
908025-4 8-025 25-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908050-4 8-050 50-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908075-4 8-075 75-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908080-4 8-080 75-ton Elec-Draulic II Press, 220/440-3 ph 10HP
908150-4 8-150 150-ton Elec-Draulic II Press, 220/440-3 ph 10 HP
908025 8-025 25-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908050 8-050 50-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908075 8-075 75-ton Elec-Draulic II Press, 220/440-3 ph 2 HP
908080 8-080 75-ton Elec-Draulic II Press, 220/440-3 ph 10HP
908150 8-150 150-ton Elec-Draulic II Press, 220/440-3 ph 10 HP
713510 713510 Remote pressure regulator valve kit.

For super-sensitive, double-acting ram control and simple operation.
Model 8-025 shown

Features

  • Electric operation provides smooth, consistent pressing action.
  • Variable ram speed allows fingertip control of ram movement for precise pressure control.
  • H-frame mounted control allows convenient control of press when workhead is out of operator's reach.
  • Adjustable table permits easy vertical movement by means of self-locking hoist.
  • Double-acting cylinder permits pulling as well as pressing ram action.
  • Safety valve protects against overloads.
  • T-ring seals prevent pressure loss.
  • Optional bolt flange for tooling attachment may be substituted for flat ram nose.

Standard Equipment

  • Frame
  • Two forged steel V-blocks
  • Flat ram nose
  • Pump
  • Safety relief valve
  • Self-locking table hoist
  • Double-acting workhead
  • Two forged steel table plates
  • Motor (2, 7.5, 10hp; 230/460-3-60)
  • Pressure gauge
  • 4-way throttling valve
Specifications
model
8-025
number
908025
capacity (tons) 25
horsepower 2
rpm
1,800
ram speed-press 15
ram speed-return 35
A width between uprights
32-3/4
B width between table channels
7-1/4
C minimum ram to table
11-3/4
D maximum ram to table
46-3/4
E ram travel 10
JxK base (inches)
43-1/2x36
L height (inches) 83
weight (lbs)
1,060

 

For super-sensitive, double-acting ram control and simple operation.
Model 8-025 shown

Features

  • Electric operation provides smooth, consistent pressing action.
  • Variable ram speed allows fingertip control of ram movement for precise pressure control.
  • H-frame mounted control allows convenient control of press when workhead is out of operator's reach.
  • Adjustable table permits easy vertical movement by means of self-locking hoist.
  • Double-acting cylinder permits pulling as well as pressing ram action.
  • Safety valve protects against overloads.
  • T-ring seals prevent pressure loss.
  • Optional bolt flange for tooling attachment may be substituted for flat ram nose.

Standard Equipment

  • Frame
  • Two forged steel V-blocks
  • Flat ram nose
  • Pump
  • Safety relief valve
  • Self-locking table hoist
  • Double-acting workhead
  • Two forged steel table plates
  • Motor (2, 7.5, 10hp; 230/460-3-60)
  • Pressure gauge
  • 4-way throttling valve
Specifications
model
8-050
number 908050
capacity (tons) 50
horsepower 2
rpm
1,800
ram speed-press 8
ram speed-return 22
A width between uprights
32-3/4
B width between table channels
7-1/4
C minimum ram to table
10-1/8
D maximum ram to table
45-1/8
E ram travel 10
JxK base (inches)
43-1/2x36
L height (inches) 86
weight (lbs)
1,360



 

For super-sensitive, double-acting ram control and simple operation.
Model 8-025 shown

Features

  • Electric operation provides smooth, consistent pressing action.
  • Variable ram speed allows fingertip control of ram movement for precise pressure control.
  • H-frame mounted control allows convenient control of press when workhead is out of operator's reach.
  • Adjustable table permits easy vertical movement by means of self-locking hoist.
  • Double-acting cylinder permits pulling as well as pressing ram action.
  • Safety valve protects against overloads.
  • T-ring seals prevent pressure loss.
  • Optional bolt flange for tooling attachment may be substituted for flat ram nose.

Standard Equipment

  • Frame
  • Two forged steel V-blocks
  • Flat ram nose
  • Pump
  • Safety relief valve
  • Self-locking table hoist
  • Double-acting workhead
  • Two forged steel table plates
  • Motor (2, 7.5, 10hp; 230/460-3-60)
  • Pressure gauge
  • 4-way throttling valve
Specifications
model
8-075
8-080
number 908075 908080
capacity (tons) 75 75
horsepower 2 10
rpm
1,800
1,800
ram speed-press 5 30
ram speed-return 15 80
A width between uprights 44 44
B width between table channels
8-1/4
8-1/4
C minimum ram to table
7-5/8
7-5/8
D maximum ram to table
37-5/8
37-5/8
E ram travel 10 10
JxK base (inches)
55-1/2x36
55-1/2x36
L height (inches) 86 86
weight (lbs)
1,950
2,100

For super-sensitive, double-acting ram control and simple operation.
Model 8-025 shown

Features

  • Electric operation provides smooth, consistent pressing action.
  • Variable ram speed allows fingertip control of ram movement for precise pressure control.
  • H-frame mounted control allows convenient control of press when workhead is out of operator's reach.
  • Adjustable table permits easy vertical movement by means of self-locking hoist.
  • Double-acting cylinder permits pulling as well as pressing ram action.
  • Safety valve protects against overloads.
  • T-ring seals prevent pressure loss.
  • Optional bolt flange for tooling attachment may be substituted for flat ram nose.

Standard Equipment

  • Frame
  • Two forged steel V-blocks
  • Flat ram nose
  • Pump
  • Safety relief valve
  • Self-locking table hoist
  • Double-acting workhead
  • Two forged steel table plates
  • Motor (2, 7.5, 10hp; 230/460-3-60)
  • Pressure gauge
  • 4-way throttling valve
Specifications
model
8-150
number 908150
capacity (tons) 150
horsepower 10
rpm
1,800
ram speed-press 17
ram speed-return 38
A width between uprights 48
B width between table channels
12-1/4
C minimum ram to table
11-3/4
D maximum ram to table
31-3/4
E ram travel 16
JxK base (inches)
66x42
L height (inches) 95
weight (lbs)
3,620

 

908025-2
DAKE MODEL 8-025 - 25-TON ELEC-DRAULIC II PRESS, 220V/3PH/60HZ 2 HP
Mfg. item #: 908025-2
DAKE908025-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908050-2
DAKE MODEL 8-050 - 50-TON ELEC-DRAULIC II PRESS, 220V/3PH/60HZ 2 HP
Mfg. item #: 908050-2
DAKE908050-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908075-2
DAKE MODEL 8-075 - 75-TON ELEC-DRAULIC II PRESS, 220V/3PH/60HZ 2 HP
Mfg. item #: 908075-2
DAKE908075-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908080-2
DAKE MODEL 8-080 - 75-TON ELEC-DRAULIC II PRESS, 220V/3PH/60HZ 10HP
Mfg. item #: 908080-2
DAKE908080-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908150-2
DAKE MODEL 8-150 - 150-TON ELEC-DRAULIC II PRESS, 220V/3PH/60HZ 10 HP
Mfg. item #: 908150-2
DAKE908150-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908025-4
DAKE MODEL 8-025 - 25-TON ELEC-DRAULIC II PRESS, 440V/3PH/60HZ 2 HP
Mfg. item #: 908025-4
DAKE908025-4
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908050-4
DAKE MODEL 8-050 - 50-TON ELEC-DRAULIC II PRESS, 440V/3PH/60HZ 2 HP
Mfg. item #: 908050-4
DAKE908050-4
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908075-4
DAKE MODEL 8-075 - 75-TON ELEC-DRAULIC II PRESS, 440V/3PH/60HZ 2 HP
Mfg. item #: 908075-4
DAKE908075-4
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908080-4
DAKE MODEL 8-080 - 75-TON ELEC-DRAULIC II PRESS,440V/3PH/60HZ 10HP
Mfg. item #: 908080-4
DAKE908080-4
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908150-4
DAKE MODEL 8-150 - 150-TON ELEC-DRAULIC II PRESS,440V/3PH/60HZ 10 HP
Mfg. item #: 908150-4
DAKE908150-4
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

107
908025
MODEL 8-025 - 25-TON ELEC-DRAULIC I
Mfg. item #: 908025
DAKE908025
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

587
908050
MODEL 8-050 - 50-TON ELEC-DRAULIC I
Mfg. item #: 908050
DAKE908050
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

573
908075
MODEL 8-075 - 75-TON ELEC-DRAULIC I
Mfg. item #: 908075
DAKE908075
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

573
908080
MODEL 8-080 - 75-TON ELEC-DRAULIC I
Mfg. item #: 908080
DAKE908080
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

573
908150
MODEL 8-150 - 150-TON ELEC-DRAULIC
Mfg. item #: 908150
DAKE908150
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

573
713510
DAKE MODEL 713510 - REMOTE PRESSURE REGULATOR VALVE KIT.
Mfg. item #: 713510
DAKE713510
Call for freight quote on this item or we will confirm freight charges before shipping.1
$714.00

107
Copyright © 2024 Smith-Hamilton, Inc
0.013 230531 14:02