Technical Sales 1–800–458–3687

Dake Drill Presses

 Model TB-16 Bench Model Drill Press 5/8 inch drill capacity  Model TB-16V Bench Model Drill Press 5/8 inch drill capacity  Model SB-16 Floor Model Drill Presses 5/8 inch drill capacity
Model TB-16
Bench Model Drill Press
5/8 inch drill capacity
 Model TB-16V
Bench Model Drill Press
5/8 inch drill capacity
Model SB-16
Floor Model Drill Presses  
5/8 inch drill capacity
 Model SB-25V Floor Model Drill Presses 1 inch drill capacity  SB-32V Floor Model Drill Presses Model 1-1/4 inch drill capacity

Model SB-250V Floor Model Drill Presses 1inch drill capacity

POWER DOWN FEED & TAPPING

Model SB-25V Floor Model
Drill Presses 
1 inch drill capacity
SB-32V Floor Model
Drill Presses Model
1-1/4 inch drill capacity
 Model SB-250V Floor Model
Drill Presses 
1inch drill capacity

 

DRILL PRESSES
977100 TB-16 Bench Drill Press 5/8" Drill Capacity 110V only
977102 TB-16V Bench Drill Press 5/8" Drill Capacity Variable Speed110V only
977200 SB-16 Floor Drill Press 5/8" Drill Capacity 110V only
977600 SB-25 Floor Drill Press 1" Drill Capacity 110V - 1 phase only
977600V SB-25V Floor Drill Press 1" Drill Capacity Variable Speed 110V - 1 phase only
977701V SB-250V Floor Drill Press 1" Drill Capacity Auto Feed Variable Speed 110V - 1 phase only
977400V SB-32V Floor Drill Press 1-1/4" Drill Capacity Variable Speed 110V -1 Phase

 

Bench Model Drill Presses Model TB-16

Bench Model Drill Presses Model TB-16

Bench model drill press featuring a locking handle hub, CE safety electrical package, a large diameter sturdy spindle, and massive cast head. Capable of quick bit changes and quick belt tension release for easy speed changes.

Warning: This product contains Nickel, a chemical known to the State of California to cause cancer.

Features:

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
  • Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
  • Top mounted speed selector knob with convenient speed range indicators allows operator to dial in optimal speed range.
  • CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.
  • Massive cast head, machined column, and sturdy cast base reduces vibration.
  • Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
  • Handle has 3 spokes with spring return for precise operator control and ergonomic operation.

Standard Equipment

  • Keyed chuck 1/2 inch
  • Drift (for bit removal)
  • Plexiglas chip and chuck guard
Specifications
Model Number TB-16
Drill capacity (in) 5/8
Horsepower 1/2
Motor n/a
Spindle taper MT2
Working diameter (in) 14-1/8
Number of speed 9
Spindle speed range 240-3,400 rpm
Electrics CE 110-volt
Weight 175 lbs
Spindle travel (in) 3-1/8
Column diameter (in) 3-1/8
Table depth (in) 11-3/4
Table width (in) 11-3/4
Base depth (in) 17-3/4
Base width (in) 12-1/4
Spindle to table (in) 16-1/2
Spindle to base (in) 26-1/2
Overall height (in) 42-1/2

 

TB-16V Bench Model Drill Press

Model TB-16V Bench Model Drill Press 5/8 inch drill capacity

Bench top variable speed drill press that is ideal for cell applications requiring fast tooling changes. Featuring a locking handle hub for repeatable depth, CE safety electrical package, a large diameter sturdy spindle, and a massive cast head. The speed can be easily adjusted while drilling by turning the large selector knob on the top of the drill.

Features:

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
  • Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
  • Top mounted speed selector knob with convenient speed range indicators allows operator to dial in optimal speed range.
  • CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.
  • Massive cast head, machined column, and sturdy cast base reduces vibration.
  • Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
  • Handle has 3 spokes with spring return for precise operator control and ergonomic operation.

Standard Equipment

  • Keyed chuck 1/2 inch
  • Drift (for bit removal)
  • Plexiglas chip and chuck guard
Specifications
Model Number TB-16V
Drill capacity (in) 5/8
Horsepower 1/2
Motor n/a
Spindle taper MT2
Working diameter (in) 14-1/8
Number of speed Mechanical variator
Spindle speed range 545-4,000 rpm
Electrics 110V 1PH
Weight 175 lbs
Spindle travel (in) 3-1/8
Column diameter (in) 3-1/8
Table depth (in) 11-3/4
Table width (in) 11-3/4
Base depth (in) 17-3/4
Base width (in) 12-1/4
Spindle to table (in) 16-1/2
Spindle to base (in) 26-1/2
Overall height (in) 42-1/2

 

Model SB-16 Floor Model Drill Press

Model SB-16 Floor Model Drill Presses   5/8 inch drill capacity

Floor model drill press featuring a locking handle hub, CE safety electrical package, a large diameter sturdy spindle, and massive cast head. Capable of quick bit changes and quick belt tension release for easy speed changes.

 

Features:

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
  • Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
  • Quick release belt tensioning for fast, easy speed changes.
  • CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.
  • Massive cast head, machined column, and sturdy cast base reduces vibration.
  • Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
  • Handle has 3 spokes with spring return for precise operator control and ergonomic operation.

Standard Equipment

  • Keyed chuck 1/2 inch on TB-16 & SB-16   5/8 inch on DB-25 & SB-32
  • Drift (for bit removal)
  • Plexiglas chip & chuck guard
Specifications
model
SB-16
drill capacity
5/8
motor hp
1/2
spindle taper MT2
working diameter
14-1/8
number of speeds 9
spindle speed range
240-3400
electrics
CE 120-vol...
weight 230
A spindle travel
3-1/8
B column diameter
3-1/8
C table depth
11-3/4
D table width
11-3/4
E base depth
19-5/8
F base width
12-1/2
G spindle to table
28-1/2
H spindle to base
49-1/4
J overall height 64

 

Model SB-25V Floor Model Drill Presses

Model SB-25V Floor Model Drill Presses  1 inch drill capacity

Floor model variable speed drill press with adjustable knob on the frequency inverter to adjust the speed while drilling. Use the LED indicator for speed readout. There is a forward and reverse selector switch for tapping applications. All floor models feature a locking handle hub for repeatable depth, CE safety electrical package, a large diameter sturdy spindle, and a massive cast head.

Features:

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
  • Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
  • Quick release belt tensioning for fast, easy speed changes.
  • CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.
  • Massive cast head, machined column, and sturdy cast base reduces vibration.
  • Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
  • Handle has 3 spokes with spring return for precise operator control and ergonomic operation.

Standard Equipment

  • Keyed chuck 1/2 inch on TB-16 & SB-16   5/8 inch on DB-25 & SB-32
  • Drift (for bit removal)
  • Plexiglas chip & chuck guard
Specifications
model
SB-25
SB-25 - 1 ...
SB-25 - 1 ...
drill capacity 1 1 1
motor hp 1 1 1
spindle taper MT3 MT3 MT3
working diameter
17-3/4
17-3/4
17-3/4
number of speeds 9 9 9
spindle speed range
270-2000
270-2000
270-2000
electrics
CE 440-vol...
CE 220-vol...
CE 110-vol...
weight 397 397 397
A spindle travel 5 5 5
B column diameter
3-5/8
3-5/8
3-5/8
C table depth
13-3/4
13-3/4
13-3/4
D table width
13-3/4
13-3/4
13-3/4
E base depth
23-5/8
23-5/8
23-5/8
F base width 15 15 15
G spindle to table
28-3/8
28-3/8
28-3/8
H spindle to base
49-1/4
49-1/4
50
J overall height 71 71 71

 

Floor Model Drill Presses Model SB-32V 1-¼†drill capacity

SB-32V Floor Model Drill Presses Model   1-1/4 inch drill capacity

Variable speed floor model drill press that comes with forward and reverse selector switch for tapping applications, and a locking handle hub for repeatable depth. CE safety electrical package, a large diameter sturdy spindle, and a massive cast head make this one touch drill press.

 

Features:

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
  • Bench and floor models both have machined table and base surfaces with t-slots for mounting and fixturing.
  • Quick release belt tensioning for fast, easy speed changes.
  • CE safety electrical package features push button on/off switch, emergency stop button, low voltage controls, thermal overload, and interlock safety switch for belt cover.
  • Massive cast head, machined column, and sturdy cast base reduces vibration.
  • Quick bit changes with standard Morse Taper (MT), common adaptors or standard keyed chuck.
  • Handle has 3 spokes with spring return for precise operator control and ergonomic operation.

Standard Equipment

  • Keyed chuck 1/2 inch on TB-16 & SB-16   5/8 inch on DB-25 & SB-32
  • Drift (for bit removal)
  • Plexiglas chip & chuck guard
Specifications
model
SB-32
drill capacity
1-1/4
motor hp 2
spindle taper
MT4
working diameter 18
number of speeds 9
spindle speed range
270-2290
electrics
CE 440-vol...
weight 483
A spindle travel
5-1/2
B column diameter 4
C table depth
15-3/4
D table width
15-3/4
E base depth
23-5/8
F base width 15
G spindle to table
26-3/8
H spindle to base 50
J overall height 71

 

Floor Model Drill Presses Model SB-250V

Floor Model Drill Presses Model SB-250V  1 inch drill capacity

Variable speed floor model drill press that automatically advances to preset depth, bottoms out, and returns automatically. Comes with forward and reverse selector switch for tapping applications, and a locking handle hub for repeatable depth. CE safety electrical package, a large diameter sturdy spindle, and a massive cast head make this one touch drill press.

 

Features:

  • A locking handle hub with convenient dial-in adjustment and an easy to read scale for fast, accurate, and repeatable depth setting changes.
  • Large diameter sturdy spindle for rigid drilling has four bearing points for smooth operation.
  • Machined table and base surfaces with t-slots for mounting and fixturing.
  • Forward and reverse selector switch for tapping applications.
  • Electrical package features on/off switch, emergency stop button, and interlock safety switch for belt cover.
  • Massive cast head, machined column, and sturdy cast base reduces vibration.
  • Latest frequency inverter technology for easy speed changes and concentrated torque.      Handle has 3 spokes with spring return for precise operator control and ergonomic operation.
  • Power down feed

Standard Equipment

  • 5/8 inch Keyed chuck
  • Drift for bit removal
  • Plexiglas chip and chuck guard

 

Specifications
model
SB-250V
Part Number 977701V
drill capacity
1 inch
motor hp 1.5 inch
Motor  110V, Single Phase
spindle taper
MT3
working diameter 18 inch
number of speeds variable speeds
spindle speed range
68-1380 RPM
electrics
120V 1PH
weight 483 lb
A spindle travel
5 inch
B column diameter 3-5/8 inch
C table depth
15-3/4 inch
D table width
15-3/4 inch
E base depth
23-5/8 inch
F base width 15 inch
G spindle to table
26-3/8 inch
H spindle to base 49-1/4 inch
J overall height 71 inch

 

977100
MODEL: TB-16 , BENCH DRILL PRESS 5/8 DRILL CAPACITY 110V ONLY
Mfg. item #: 977100
DAKE977100
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,218.39

52
977102
MODEL: TB-16V , BENCH DRILL PRESS 5/8 DRILL CAPACITY VARIABLE SPEED110V ONLY
Mfg. item #: 977102
DAKE977102
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,979.42

52
977200
MODEL: SB-16 , FLOOR DRILL PRESS 5/8 DRILL CAPACITY 110V ONLY
Mfg. item #: 977200
DAKE977200
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,732.56

52
977600
MODEL: SB-25 , FLOOR DRILL PRESS 1 DRILL CAPACITY 110V - 1 PHASE ONLY
Mfg. item #: 977600
DAKE977600
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,331.41

52
977600V
MODEL: SB-25V , FLOOR DRILL PRESS 1 DRILL CAPACITY VARIABLE SPEED 110V - 1 PHASE ONLY
Mfg. item #: 977600V
DAKE977600V
lease to own for as little as:$58 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,921.12

52
977701V
MODEL: SB-250V , FLOOR DRILL PRESS 1 DRILL CAPACITY AUTO FEED VARIABLE SPEED 110V - 1 PHASE ONLY
Mfg. item #: 977701V
DAKE977701V
lease to own for as little as:$78 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,885.69

36577
977400V
MODEL: SB-32V , FLOOR DRILL PRESS 1-1/4 DRILL CAPACITY VARIABLE SPEED 110V -1 PHASE
Mfg. item #: 977400V
DAKE977400V
lease to own for as little as:$69 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,428.55

52
Copyright © 2024 Smith-Hamilton, Inc
0.007 240319 11:32