Desktop software (PC/Mac) for downloading, viewing, printing and storing measurement data from DeFelsko inspection instruments. No internet connection required.
PosiSoft 3.0 offers customizable reporting tools which allows you to add pictures and screen captures, notes and annotations, add or remove sections, change headings, and more. Save your custom layouts as templates for future use.
IR Printer receives data from Standard (2) and Memory (3) models via wireless infrared.
Certified Thickness Standards are used to verify the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO/QS-9000 and in-house quality control requirements.
Contracts often specify that coating thickness measurements be taken by gages whose measurement accuracy is traceable to a National Metrology Institute such as NIST or PTB.
AC Power Cable for continuous operation.
This kit supplies several alternate power solutions for your battery-operated PosiTector (6000, DPM, 200 & UTG). They allow the gage to operate continuously without the need for batteries. Use the cable alone to connect a PosiTector to your PC's built-in USB port that acts as a continuous power source. Or connect the cable to the included power adaptor which plugs into any AC wall electrical outlet, 110 or 220V. A selection of electrical plugs is included which are capable of dealing with most countryâs outlets.
Probe Fixture Stand ensures repeatable positioning.
DeFelsko probes are incredibly accurate, especially the microprobe series. But fine, precise measurements on small parts are often affected by the operator. Our probe fixture removes adverse
operator influence by fixturing both the probe and the part. This high quality device is a must in any calibration lab.
Intended primarily for the straight (0 degree) ferrous or non-ferrous microprobes, this stand can also be used with our conventional regular probes. It ensures that the part is brought up to the probe perpendicular to the partâs surface in a controlled, repeatable way.
PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.
Every PosiTector UTG ships with (1) bottle of Ultrasonic couplant. Additional 4oz. bottles are available. (sold in cases of 12) MSDS
Certified Step Blocks are ideal for checking calibration and operation of ultrasonic thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
|ATADHESIVEKIT||PosiTest® AT Adhesive Kit (additional adhesive, mixing sticks, palettes, cotton swabs)|
|BATTREAAA4PK||Rechargeable Battery Pack 4 AAA eneloop batteries for PosiTector 6000/DPM/SPG only|
|DOLLY20||PosiTest® AT Additional 20 mm dollies (10)|
|DOLLY50||PosiTest® AT Additional 50 mm dollies (4)|
|GEL_P||PosiTector® 200 Additional 4 oz. Ultrasonic Gel: Case of 12 Bottles|
|PRINTERBT||Bluetooth Printer for use with PosiTector 6000/DPM/SPG Advanced models only|
|IR_PRINTER||IR Printer for use with PosiTector 200/UTG/PC|
|IR_PAPER||3 Rolls of IR paper|
|USBAC||AC Power Kit for PosiTector series USBAC $45|
|STDZALM||ALUMINUM Zero Plates|
|STDCSS||Certified Plastic Shim Set|
|SPGZEROKIT||Glass Plate and Shim|
|STDS1||Ideal For PosiTector 6000 - F, FS, FRS, FN, FNS, FNRS, PosiTest F & FM / S SeriesEpoxy on Steel (4)|
|STDS2||Ideal For PosiTector 6000 F0S, F45S, F90S, PosiTest DFT Ferrous & Combo / S SeriesEpoxy on Steel (4)|
|STDS3||Ideal For PosiTest G & GM, PosiPen A, B & C / S SeriesEpoxy on Steel (4)|
|STDA1||Ideal For PosiTector 6000 - N ,NS, NRS, FN, FNS, FNR / A SeriesEpoxy on Aluminum (4)|
|STDA2||Ideal For PosiTector 6000 - NAS , N0S, N45S, N90S, PosiTest DFT Combo / A SeriesEpoxy on Aluminum (4)|
|STDA3||Ideal For PosiTector 100B, 200, 200B / A SeriesEpoxy on Aluminum (4)|
|STDP1||Ideal For PosiTector 6000 - FT, FTS, NTS, FNTS / P Series Polystyrene Blocks (4)|
|STDP2||Ideal For PosiTector 6000 - FHS, NHS, EOC / P Series Polystyrene Blocks (4)|
|STDP3||Ideal For PosiTector 100 C / P Series Polystyrene Blocks (4)|
|STDP4||Ideal For PosiTector 100 D / P Series Polystyrene Blocks (4)|
|STDP5||Ideal For PosiTector 6000 - FKS, NKS / P Series Polystyrene Blocks (4)|
|STDP6||Ideal For PosiTector 200 C / P Series Polystyrene Blocks (4)|
|STDB1||PosiTector UTG Calibration Test Block (INCH)|
|STDB1M||PosiTector UTG Calibration Test Block (METRIC)|
|PosiTector DPM PosiSoft||Download FREE from Web Site|
|PRBDPMHSP||PosiTector® DPM Hand-Held Surface Probe|
|PRBDPMS-B||PosiTector® DPM Liquid Temperature Probe|
|PRBDPMAP||PosiTector® DPM Self-Adhering Surface Probe|
|TMPLTAS||PosiTest® AT Drilling Template for 50 mm Dollies|