General Equipment Auger Accessories

242H and 262H - 2350 BOR-MAX SERIES EARTH AUGERS
PART NUMBER	FLIGHTING OD (IN)	CUTTING DIA (IN)	EFFECTIVE DIGGING DEPTH (IN)	ROUND DRIVE CONNECTION (IN)	WEIGHT (LBS)	COMPATIBLE PRODUCT
2350-2E	2-1/4	2.5	30	1	6.4	242H, 262H
2350-3E	3-1/4	3.5			7.4
2350-4E	4	5.2			11.6
2350-6E	6	7.5			13.6
2350-8E	8	9.5			15.8
2350-10E	10	10.5			26.0	262H only
2350-12E	12	12.5			30.2	262H only

242H and 262H - BOR-MAX SERIES NON-FLIGHTED AUGER EXTENSION
PART NUMBER	FLIGHTING OD (IN)	CUTTING DIA (IN)	EFFECTIVE DIGGING DEPTH (IN)	ROUND DRIVE CONNECTION (IN)	WEIGHT (LBS)	COMPATIBLE PRODUCT
2350-15X	N/A	N/A	15	1	3.6	242H, 262H, All Bor-Max Series Augers

242H and 262H - BOR-MAX SERIES AUGER BLADES
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
E244PAK3	Earth blade for 4 inch diameter auger. Pack of 3.	0.2	2350-4E
E246PAK3	Earth blade for 6 inch diameter auger. Pack of 3.	0.2	2350-6E
E248PAK3	Earth blade for 8 inch diameter auger. Pack of 3.	0.4	2350-8E
E310PAK3	Earth blade for 10 inch diameter auger. Pack of 3.	0.4	2350-10E
E512PAK3	Earth blade for 12 inch diameter auger. Pack of 3.	0.5	2350-12E

242H and 262H - BOR-MAX SERIES AUGER PIN
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
2121PAK3	Auger pin, .375 inch diameter. Pack of 3.	0.2	242H, 262H, All Bor-Max Series Augers

242H and 262H - BOR-MAX SERIES AUGER SCREW BITS
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
P302PAK2	Auger screw bit, 3 inch auger diameter only. Pack of 2.	0.8	2350-3E
P801PAK3	Auger screw bit, 2 inch auger diameter only. Pack of 3.	1.0	2350-2E
SB26PAK3	Auger screw bit for all auger sizes except 2 and 3 inch diameter augers. Includes mounting bolt and nut. Pack of 3.	1.4	All other Bor-Max Series auger sizes

332H - 4400 SERIES EARTH AUGERS
PART NUMBER	FLIGHTING OD (IN)	CUTTING DIA (IN)	EFFECTIVE DIGGING DEPTH (IN)	HEX DRIVE CONNECTION (IN)	WEIGHT (LBS)	COMPATIBLE PRODUCT
4400-2E3	2.25	2.5	36	0.812	7.7	332H, 5500 Series Flighted & Non-Flighted Extensions, 4400 Series Couplers
4400-3E3	3.25	3.5		1.125	13.6
4400-4E3	4	4.5		1.375	17.0
4450-6E3	6	7.5			23.0
4450-8E3	8	9.5			27.8
4450-10E3	10	11.5			34.8
4450-12E3	12	13.5			39.0
4400-14E3	14	15.5			48.6
4400-16E3	16	17.5			51.2
4400-18P	18	19.5	30		52.0

332H - 5500 SERIES FLIGHTED EARTH AUGER EXTENSIONS
PART NUMBER	FLIGHTING OD (IN)	CUTTING DIA (IN)	EFFECTIVE DIGGING DEPTH (IN)	HEX DRIVE CONNECTION (IN)	WEIGHT (LBS)	COMPATIBLE PRODUCT
5500-2X3	2.25	N/A	36	1.375	7.6	332H, 4400 Series Augers and Couplers
5500-3X3	3.25				13.8
5500-4X3	4				15.8
5500-6X3	6				20.8
5500-8X3	8				23.8
5500-10X3	10				26.8
5500-12X3	12				31.0

348H - PLDBH/PSD GROUND HOG TYPE EARTH AUGERS
PART NUMBER	FLIGHTING OD (IN)	CUTTING DIA (IN)	EFFECTIVE DIGGING DEPTH (IN)	SQUARE DRIVE CONNECTION (IN)	WEIGHT (LBS)	COMPATIBLE PRODUCT
PSD4	4	4.5	36	.875	17.0	348H and PSD Ground HogÂ® Type Non-Flighted Extension
PLDBH6	6	7.5			23.0
PLDBH8	8	9.5			27.8
PLDBH10	10	11.5			34.8
PLDBH12	12	13.5			39.0
PSD14	14	15.5			48.6
PSD16	16	17.5			51.2
PSD18P	18	19.5	30		52.0

332H and 348H - NON-FLIGHTED AUGER EXTENSIONS
PART NUMBER	FLIGHTING OD (IN)	CUTTING DIA (IN)	EFFECTIVE DIGGING DEPTH (IN)	DRIVE CONNECTION (IN)	WEIGHT (LBS)	COMPATIBLE PRODUCT
5500-15X	N/A	N/A	15	1.375 Hex	7.1	332H, 4400 Series Augers
PSD-15X	N/A	N/A	15	0.875 Square	6.2	348H, PLDBH/PSD Ground Hog Type Augers

332H - AUGER COUPLERS
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
4400-2CLR	Coupler, 1.375 inch female hexagon to .812 inch male hexagon pin. For connecting 332H to 4400-2E3 auger and 5500-2X3 ighted auger extension.	3.3	4400-2E3 auger and 5500-2X3 auger extension
4400-3CLR	Coupler, 1.375 inch female hexagon to 1.125 inch male hexagon pin. For connecting 332H to 4400-3E3 auger and 5500-3X3 ighted auger extension.	4.0	4400-3E3 auger and 5500-3X3 auger extension

332H and 348H - AUGER PINS
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
2021PAK3	Auger pin, .312 inch diameter. Pack of 3.	0.2	348H, PLDBH/PSD Ground Hog Type Augers and Non-Flighted Extension
2121PAK3	Auger pin, .375 inch diameter. Pack of 3.	0.2	332H, 4400 Series Augers and Couplers, 5500 Series Flighted and Non-Flighted Extensions

332H and 348H - AUGER TEETH
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
35PAK7	Standard dirt tooth, thin cross section for fast penetration, wears sharp. For ordinary digging conditions. Can install in all boring head sockets. Includes RUB-R-LOKTM. Pack of 7.	0.4	4400, PLDBH/ PSD Series Augers
35HFCPAK7	Hard-faced dirt tooth for substantially increased wear life over standard dirt tooth. For ordinary digging conditions. Can install in all boring head sockets with hardfacing up. Includes RUB-R-LOKTM. Pack of 7.	0.4
5T30PAK3	Chisel dirt tooth. Rips through caliche, hardpan and other formations. For install in inside, boring head sockets only, rib side facing up. Not for use alone w/6 inch diameter auger. Includes RUB-R-LOKTM. Pack of 3.	0.4
5T30CPAK3	Chisel dirt tooth w/Tungsten Carbide overlay. Rips through caliche, hardpan and other formations. For install in inside, boring head sockets only, rib side facing up. Not for use alone w/6 inch diameter auger. Includes RUB-R-LOKTM. Pack of 3.	0.4
1336PAK2	Tungsten Carbide tooth. For use in extremely abrasive and frozen soil. Extended wear life over standard dirt tooth. Can install in all boring head sockets. Use in rocky soils may shatter inserts. Includes RUB-R-LOKTM. Pack of 2.	0.6

332H and 348H - AUGER SCREW BITS
PART NUMBER	DESCRIPTION	WEIGHT (LBS)	COMPATIBLE PRODUCT
SB25PAK3	Auger screw bit. For 2.25, 14, 16 and 18 inch diameter augers. Includes mounting bolt and nut. Pack of 3.	0.8	4400, PLDBH/ PSD Series Augers
SB25C	Auger screw bit w/Tungsten Carbide overlay for increased wear life. For 2.25, 14, 16 and 18 inch diameter augers. Includes mounting bolt and nut. Pack of 1.	1.0
SB26PAK3	Auger screw bit. For 6, 8, 10 and 12 inch diameter augers. Includes mounting bolt and nut. Pack of 3.	1.4
SB26C	Auger screw bit w/Tungsten Carbide overlay for increased wear life. For 6, 8, 10 and 12 inch diameter augers. Includes mounting bolt and nut. Pack of 1.	1.6
SB35	Auger screw bit. For 3.25 inch diameter auger. Includes mounting bolt and nut. Pack of 1.	1.9	4400 Series Augers
SB35C	Auger screw bit w/Tungsten Carbide overlay for increased wear life. For 3.25 inch diameter auger. Includes mounting bolt and nut. Pack of 1.	1.9	4400 Series Augers
SB45	Auger screw bit. For 4 inch diameter auger. Includes mounting bolt and nut. Pack of 1.	3.0	4400, PLDBH/ PSD Series Augers
SB45C	Auger screw bit w/Tungsten Carbide overlay for increased wear life. For 4 inch diameter auger. Includes mounting bolt and nut. Pack of 1.	3.4	4400, PLDBH/ PSD Series Augers

2350 Bor-Max Series Augers and Auger Extension

Drive connection: 1 inch round
General Equipment Company offers a complete line of earth augers plus extension for 240H, 235H, 242H and 262H Hole Diggers. Augers range in size from 2 to 12 inch in diameter in plus a non-flighted extension. Drive connection 1 inch round ONLY.


Part No.	Flighting OD	Cutting Dia	Weight
2135-2E	2-1/4 inch	2.5 inch	8 lbs
2135-3E	3-1/4 inch	3.5 inch	9 lbs
2135-4E	4 inch	5.2 inch	12 lbs
2135-6E	6 inch	7.5 inch	14 lbs
2135-8E	8 inch	9.5 inch	18 lbs
2350-10E	10 inch	11.5 inch	32 lbs
2350-12E	12 inch	13.5 inch	44 lbs

Part No.	Flighting OD	Cutting Dia	Weight
4400-2E3	2-1/4 inch	2.5 inch	19 lbs
4400-3E3	3-1/4 inch	3.5 inch	13 lbs
4400-4E3	4 inch	4.5 inch	19 lbs
4410-4E3	4 inch	4.5 inch	19 lbs
4450-6E3	6 inch	7.5 inch	24 lbs
4450-8E3	8 inch	9.5 inch	30 lbs
4450-10E3	10 inch	11.6 inch	36 lbs
4450-12E3	12 inch	13.6 inch	48 lbs
4400-16E3	16 inch	17.2 inch	61 lbs
4400-18P*	18 inch	19.7 inch	40 lbs
*Denotes a planting auger with 9 inch length flighting intended for shallow digging. Not available with full lenght flighting

GROUND HOG Models C71-5, D5 and 1M Series Earth Drills, M343H Two Man Hole Digger and M660 DIG-R-MOBILE with 660-7CLR auger connection coupler (GROUND HOG 7/8 inch square). Equipped with full length auger flghting and Pengo type CSA boring head with hardfaced teeth. Augers range in size from 4.5" to 19.5 " in diameter with flighted augers and non-flighted extention. Drive connection GROUND HOG 7/8 inch square

PSD Series (GROUND HOG TYPE) Augers	Part No.	Flighting OD	Cutting Dia	Weight
Digging Depth 3 Feet	PLDBH6	6 inch	7.5 inch	22 lbs
	PLDBH8	8 inch	9.5 inch	27 lbs
	PLDBH10	10 inch	11.5 inch	33 lbs
	PLDBH12	12 inch	13.5 inch	40 lbs
* Denotes a planting auger with 9 inch length flighting intended for shallow digging. Not available with full length flighting

4710 Series Auger - Drive Connection: 2 inch hexagon

Available in 3 foot effective digging depths. Each equipped with 1/4 or 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 4710 Series auger and 6700 Series Auger Extentions utilize a formed steel boring head with Pengo TYPE teeth and screw bit. For use with either the M471-12 and M471-20 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2 inch hexagon drive connection.

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
4710-6E3	6 inch	7-1/2 inch	3 feet	70 lbs
4710-8E3	8 inch	9-1/2 inch	3 feet	80 lbs
4710-12E3	12 inch	13-1/2 inch	3 feet	108 lbs
4710-16E3	16 inch	17-1/2 inch	3 feet	130 lbs
4710-18E3	18 inch	19-1/2 inch	3 feet	140 lbs
4710-24E3	24 inch	25-1/2 inch	3 feet	250 lbs
4710-30E3	30 inch	31-1/2 inch	3 feet	313 lbs
4710-36E3	36 inch	37-1/2 inch	3 feet	375 lbs

4750 Series Augers - Drive connection: 2-9/16 inch round

Available in 3 foot effective digging depths. Each equipped with 1/4 or 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 4750 Series auger and 4780 Series auger extensions utilize a formed steel boring head with PengoÂ® TYPE teeth and screw bit. For use with either the M553-12 and M553-20 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2-9/16 inch round auger drive connection.

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
4750-6E3	6 inch	7-1/2 inch	3 feet	60 lbs
4750-8E3	8 inch	9-1/2 inch	3 feet	65 lbs
4750-12E3	12 inch	13-1/2 inch	3 feet	91 lbs
4750-16E3	16 inch	17-1/2 inch	3 feet	109 lbs
4750-18E3	18 inch	19-1/2 inch	3 feet	118 lbs
4750-24E3	24 inch	25-1/2 inch	3 feet	221 lbs
4750-30E3	30 inch	31-1/2 inch	3 feet	276 lbs
4750-36E3	36 inch	37-1/2 inch	3 feet	330 lbs

6700 Series Augers Extensions - Drive connection: 2 inch hexagon

Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6710 Series auger utilize a PengoÂ® TYPE LDOBH cast steel boring heads. For use with either the M671-16 and M671-24 Series DIG-R-TACHÂ® and competitive models of popular hydraulic power earth drilling attachments utilizing a 2 inch hexagon auger drive connection

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6710-6PE4	6 inch	7-1/2 inch	4 feet	70 lbs
6710-6PE5	6 inch	7-1/2 inch	5 feet	85 lbs
6710-9PE4	8 inch	9-1/2 inch	4 feet	80 lbs
6710-6PE5	8 inch	9-1/2 inch	5 feet	95 lbs
6710-12PE4	12 inch	13-1/2 inch	4 feet	108 lbs
6710-12PE5	12 inch	13-1/2 inch	5 feet	130 lbs
6710-16PE4	16 inch	17-1/2 inch	4 feet	130 lbs
6710-16PE5	16 inch	17-1/2 inch	5 feet	160 lbs
6710-18PE4	18 inch	19-1/2 inch	4 feet	140 lbs
6710-18PE5	18 inch	19-1/2 inch	5 feet	170 lbs
6710-24PE4	24 inch	25-1/2 inch	4 feet	250 lbs
6710-24PE5	24 inch	25-1/2 inch	5 feet	280 lbs
6710-30PE4	30 inch	31-1/2 inch	4 feet	313 lbs
6710-30PE5	30 inch	31-1/2 inch	5 feet	350 lbs
6710-36PE4	36 inch	37-1/2 inch	4 feet	375 lbs
6710-36PE5	36 inch	37-1/2 inch	5 feet	420 lbs

6750 Series Augers - Drive connection: 2-9/16 inch round

Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6750 Series auger utilize a PengoÂ® TYPE LDOBH cast steel boring heads. For use with either the M753-16 and M753-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2-9/16 inch round auger drive connection.

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6750-6PE4	6 inch	N/A	4 feet	70 lbs
6750-6PE5	6 inch	N/A	5 feet	85 lbs
6750-9PE4	8 inch	N/A	4 feet	80 lbs
6750-6PE5	8 inch	N/A	5 feet	95 lbs
6750-12PE4	12 inch	N/A	4 feet	108 lbs
6750-12PE5	12 inch	N/A	5 feet	130 lbs
6750-16PE4	16 inch	N/A	4 feet	130 lbs
6750-16PE5	16 inch	N/A	5 feet	160 lbs
6750-18PE4	18 inch	N/A	4 feet	140 lbs
6750-18PE5	18 inch	N/A	5 feet	170 lbs
6750-24PE4	24 inch	N/A	4 feet	250 lbs
6750-24PE5	24 inch	N/A	5 feet	280 lbs
6750-30PE4	30 inch	N/A	4 feet	313 lbs
6750-30PE5	30 inch	N/A	5 feet	350 lbs
6750-36PE4	36 inch	N/A	4 feet	375 lbs
6750-36PE5	36 inch	N/A	5 feet	420 lbs

TCT Series Augers - Drive connections: 2-9/16 inch round or 2 inch hexagon

The TCT Series features boring head configurations cast from alloy steel and incorporate concial-type, Tungsten Carbide bits for operation in compacted soils, fracturable rocks or in solid formations where adequate torque and downforce can be sustained. Ideal solutions for tough drilling projects in caliche, hardpan, as well as sandstone and limestone formations where conventional augers get stopped or produce less than desirable productivity rates.

TCT Series Augers are available in standard 36, 48 and 60 inch effective digging lengths from 6 to 24 inch diameter. Thick, sectional type flighting is lapped welded to maximize strength and minimize excavated material falling back into the hole. Heavy duty axle configurations are designed to withstand the higher torsional stresses encountered when drilling.


Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
TCT6-2.00H-36	6 inch	7-1/2 inch	36 inches	65 lbs
TCT6-2.00H-48	6 inch	7-1/2 inch	48 inches	80 lbs
TCT6-2.00H-60	6 inch	7-1/2 inch	60 inches	95 lbs
TCT9-2.00H-36	8 inch	10-1/2 inch	36 inches	75 lbs
TCT9-2.00H-48	8 inch	10-1/2 inch	48 inches	90 lbs
TCT9-2.00H-60	8 inch	10-1/2 inch	60 inches	105 lbs
TCT12-2.00H-36	12 inch	13-1/2 inch	36 inches	102 lbs
TCT12-2.00H-48	12 inch	13-1/2 inch	48 inches	118 lbs
TCT12-2.00H-60	12 inch	13-1/2 inch	60 inches	148 lbs
TCT18-2.00H-36	18 inch	19-1/2 inch	36 inches	120 lbs
TCT18-2.00H-48	18 inch	19-1/2 inch	48 inches	150 lbs
TCT24-2.00H-36	24 inch	25-1/2 inch	36 inches	240lbs
TCT24-2.00H-48	24 inch	25-1/2 inch	48 inches	270 lbs
TCT24-2.00H-60	24 inch	25-1/2 inch	60 inches	300 lbs

For use with either the M671-16 and M671-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2 inch hexagon auger drive connection.


Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
TCT6-2.56RD-36	6 inch	7-1/2 inch	36 inches	65 lbs
TCT6-2.56RD-48	6 inch	7-1/2 inch	48 inches	80 lbs
TCT6-2.56RD-60	6 inch	7-1/2 inch	60 inches	95 lbs
TCT9-2.56RD-36	8 inch	10-1/2 inch	36 inches	75 lbs
TCT9-2.56RD-48	8 inch	10-1/2 inch	48 inches	90 lbs
TCT9-2.56RD-60	8 inch	10-1/2 inch	60 inches	105 lbs
TCT12-2.56RD-36	12 inch	13-1/2 inch	36 inches	102 lbs
TCT12-2.56RD-48	12 inch	13-1/2 inch	48 inches	118 lbs
TCT12-2.56RD-60	12 inch	13-1/2 inch	60 inches	148 lbs
TCT18-2.56RD-36	18 inch	19-1/2 inch	36 inches	150 lbs
TCT18-2.56RD-48	18 inch	19-1/2 inch	48 inches	170 lbs
TCT24-2.56RD-36	24 inch	25-1/2 inch	36 inches	240 lbs
TCT24-2.56RD-48	24 inch	25-1/2 inch	48 inches	270 lbs
TCT24-2.56RD-60	24 inch	25-1/2 inch	60 inches	300 lbs

For use with either the M573-16 and M753-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2-9/16 inch round auger drive connection.

2350 Bor-Max Series Auger Extension

General Equipment Company offers a complete line of earth augers plus extension for 240H, 235H, 242H and 262H Hole Diggers. Augers range in size from 2 to 12 inch in diameter in plus a non-flighted extension. Drive connection 1 inch round ONLY. Drive connection: 1 inch round


Part No.	Flighting OD	Digging Depth	Weight
2135-15X	No Flighting	15 inch	4 lbs
2350 Series 10" and 12" augers for use with 235H and 262H Two Man Hole Digger only.

5500 Series Augers Extension (No Flighting)

Part No.	Flighting OD	Digging Depth	Weight
5500-15X	No Flighting	15 inches	8 lbs

PSD Series Augers Extension (No Flighting)

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
PSD-15X	No Flighting	N/A	7/8 inch square	6 lbs

6700 Series Auger Extensions (No Flighting) - 2" Series Auger Extensions

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6700-15X	No Flighting	N/A	15 inches	23 lbs
6700-36X	No Flighting	N/A	36 inch	34 lbs

6750 Series Auger Extensions (No Flighting) - 2-9/16" Series Auger Extensions

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6780-15X	No Flighting	N/A	15 inches	23 lbs
6780-36X	No Flighting	N/A	36 inch	34 lbs

6700 Series Augers Extensions - Drive connection: 2 inch hexagon

Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6710 Series auger utilize a PengoÂ® TYPE LDOBH cast steel boring heads. For use with either the 471-12, M471-20, M671-16 and 671-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2 inch hexagon auger drive connection.

Drive connection: 2 inch hexagon
Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6700-6X4	6 inch	N/A	4 feet	60 lbs
6700-6X5	6 inch	N/A	5 feet	75 lbs
6700-9X4	8 inch	N/A	4 feet	65 lbs
6700-9X5	8 inch	N/A	5 feet	80 lbs
6700-12X4	12 inch	N/A	4 feet	91 lbs
6700-12X5	12 inch	N/A	5 feet	113 lbs
6700-16X4	16 inch	N/A	4 feet	109 lbs
6700-16X5	16 inch	N/A	5 feet	136 lbs
6700-18X4	18 inch	N/A	4 feet	118 lbs
6700-18X5	18 inch	N/A	5 feet	148 lbs
6700-24X4	24 inch	N/A	4 feet	221 lbs
6700-24X5	24 inch	N/A	5 feet	251 lbs
6700-30X4	30 inch	N/A	4 feet	276 lbs
6700-30X5	30 inch	N/A	5 feet	313 lbs
6700-36X4	36 inch	N/A	4 feet	330 lbs
6700-36X4	36 inch	N/A	5 feet	375 lbs

Drive connection: 2 inch hexagon (No Flighting)
Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6700-15X	No Flighting	N/A	15 inches	23 lbs
6700-36X	No Flighting	N/A	36 inch	34 lbs

6780 Series Auger Extensions - Drive connection: 2-9/16 inch round

Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6750 Series auger utilize a Pengo TYPE LDOBH cast steel boring heads. For use with either theSeries DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2-9/16 inch round auger drive connection.

6780 Series Auger Extensions - Drive connection: 2-9/16 inch round
Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6780-6X4	6 inch	N/A	4 feet	60 lbs
6780-6X5	6 inch	N/A	5 feet	75 lbs
6780-9X4	8 inch	N/A	4 feet	65 lbs
6780-9X5	8 inch	N/A	5 feet	80 lbs
6780-12X4	12 inch	N/A	4 feet	91 lbs
6780-12X5	12 inch	N/A	5 feet	113 lbs
6780-16X4	16 inch	N/A	4 feet	109 lbs
6780-16X5	16 inch	N/A	5 feet	136 lbs
6780-18X4	18 inch	N/A	4 feet	118 lbs
6780-18X5	18 inch	N/A	5 feet	148 lbs
6780-24X4	24 inch	N/A	4 feet	221 lbs
6780-24X5	24 inch	N/A	5 feet	251 lbs
6780-30X4	30 inch	N/A	4 feet	276 lbs
6780-30X5	30 inch	N/A	5 feet	313 lbs
6780-36X4	36 inch	N/A	4 feet	330 lbs
6780-36X4	36 inch	N/A	5 feet	375 lbs

6780 Series Auger Extensions (No Flighting) - 2-9/16" HEX Connection

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6780-15X	No Flighting	N/A	15 inches	25 lbs
6780-36X	No Flighting	N/A	3 feet	36 lbs

Part No.	Description	Weight
4400-2CLR	1-3/8 inch female hexagon box to 13/16 inch male hexagon pin. Allows the 330H to utilze the 4400-2E3 earth auger and 5500-2X3 auger extensions.	4 lbs
4400-3CLR	1-3/8 inch female hexagon box to 1-1/8 inch male hexagon pin. Allows the 330H Hole Digger to utilize the 4400-3E3, 4410-4E3 earth augers and 5510-4X3 auger extensions.	4 lbs

Part No.	Description	Weight
6700-2CLR	Adapts 6710 Series auger with 2 inch hexagon auger connection to Lowe and General 753 Series DIG-R-TACHÃÂ® earth auger attachments with 2-9/16 inch round auger connection (3/4 inch diameter pin).	20 lbs
6700-3CLR	Adapts 6710 Series auger with 2 inch hexagon auger connection to Danuser earth auger attachments with 2-9/16 inch round auger connection (1/2 inch diameter pin).	20 lbs

Couplers for use with 671/751 DIG-R-TACH
	Part No.	Description	Weight
	6700-4CLR	Adapts Lowe earth auger with 2-9/16 inch round auger connection to Series 671 DIG-R-TACH with 2 inch hexagon auger connection (3/4 inch diameter pin).	20 lbs
	6700-5CLR	Adapts Danuser earth auger with 2-9/16 inch diameter round auger connection to Series 671 DIG-R-TACH with 2 inch hexagon auger connection (1/2 inch diameter pin).	20 lbs

Part No.	Description	Application
35HFC Hardfaced Dirt Tooth	Hardfacing substantially increases the wear life over the 35 Standard Dirt Tooth. Install in all boring head sockets with hardfacing up.	All augers equipped with a Pengo type boring head

5T30 Chisel Type Dirt Tooth	Rips though caliche, hardpan and other formations. Install only in the inside sockets of the boring head with rib facing up. Not for use alone	All augers equipped with a Pengo type boring head.

1336 Tungsten Carbide Tooth	For use in extremely abrasive and frozen soil. Delivers extended wear life over the standard dirt tooth. Use in rocky soils may shatter inserts.	All augers equipped with a Pengo type boring head.

Part No.

Description

Application

P302

Screw Bit

3â (only) Auger Diamater

2135-3E Augers

P801

Screw Bit

All except 3â Auger Diamater

2135 Series Augers, except 2135-3E

Replacement Auger Screw Bits

Part No.	Description	Application
SB25 OLD STYLE for Auger Bits purchased BEFORE 2013 Screw Bit	Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters.	4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.
SB26 NEW STYLE for Auger Bits purchased AFTER 2013 Screw Bit	Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters.	4450, Series Earth Augers equipped with a Pengo type boring head.
SB25C Screw Bit	Also available with Tungsten Carbide overlay to increase wear life.	4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.

SB35 Screw Bit	Use in most soils. Thin cross section for fast penetration.	4400-3E3, 5500-3E5 augers, and 4710, 4750, 6710, 6750, Series EarthAugers.
SB35C Screw Bit	Also available with Tungsten Carbide overlay to increase wear life.	4400-3E3, 5500-3E5 augers, and 4710, 4750, 6710, 6750, Series EarthAugers.

SB45 Screw Bit	Use in most soils. Thin cross section for fast penetration	4400-4E3, 5500-4E3, 4410-4E3, 5510-4E3

	Part No.	Description
	E244	4 inch Earth Blade
	E246	6 inch Earth Blade
	E248	8 inch Earth Blade