General Equipment Hand Held Augers

models
242H
262H
332H
348H

2350 Bor-Max Series Augers Models and Accessories
242H	Epic Series One Man Hole Digger 2 - 8 inch
262H	Epic Series Teo Man Hole Digger 2 - 12 inch

2350 Bor-Max Series Augers and Auger Extension
General Equipment Company offers a complete line of earth augers plus extension for 240H, 235H, 242H and 262H Hole Diggers. Augers range in size from 2 to 12 inches in diameter in plus a non-flighted extension. Drive connection 1 inch round ONLY.
Part No.	Flighting OD	Cutting Dia	Weight
2350-2E	2-1/4 inch	2.5 inch	8 lbs
2350-3E	3-1/4 inch	3.5 inch	9 lbs
2350-4E	4 inch	5.2 inch	12 lbs
2350-6E	6 inch	7.5 inch	14 lbs
2350-8E	8 inch	9.5 inch	18 lbs
2350-10E	10 inch	11.5 inch	32 lbs
2350-12E	12 inch	13.5 inch	44 lbs
2350 Bor-Max Series Auger Extension
2350-15X	No Flighting	15 inch Digging Depth	4 lbs

Replacement Parts and Consumables
Auger Pin
2121PAK3	Auger Pin All 2135, 2350, 4400/4450 Series Augers, Non-flighted extension and Couplers plus, 5500 Series Flighted Extensions
2135 and 2350 Series Auger Replacement Blades
E244PAK3	4 inch Earth Blade
E246PAK3	6 inch Earth Blade
E248PAK3	8 inch Earth Blade
E310PAK3	10 inch Earth Blade (For 2350 Series Augers only)
E512PAK3	12 inch Earth Blade (For 2350 Series Augers only)
Replacement Auger Screw Bits
P801PAK3	All Except 3 inch Diameter Augers (2135-2E and 2350-2E plus 2135 Series 4 inch Through 8 inch Diameter Augers)
P302PAK2	3 inch Diameter Augers (only) 2135-3E and 2350-3E Augers
SB26PAK3	Use in most soils. Thin cross section for fast penetration. Install in all 4450 series augers 2350 Series 4 inch Through 12 inch Diameter Augers. 4450, BT400 and PLDBH Series Earth Augers equipped with an LDBH type boring head.

5500 Series Augers Models and Accessories
332H	Epic Series Teo Man Hole Digger 2 - 18 inch

5500 Series Augers
General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE hole diggers. Auger extensions range in size from 2.5 inch to 12 inch in diameter. Drive connection 1-3/8 inch Hex
Part No.	Flighting OD	Digging Depth	Weight
5500-2X3	2-1/4 inch	3 feet	9 lbs
5500-3X3	3-1/4 inch	3 feet	14 lbs
5500-4X3	4 inch	3 feet	18 lbs
5500-6X3	6 inch	3 feet	20 lbs
5500-8X3	8 inch	3 feet	24 lbs
5500-10X3	10 inch	3 feet	30 lbs
5500-12X3	12 inch	3 feet	40 lbs
5500 Series Auger Extension (No Flighting)
5500-15X	No Flighting	15 inches Digging Depth	8 lbs
Drive connection is 13/16 inch hexagon for the 5500-2X3 and 1-1/8 inch for the 5500-3X3

5500 Series Replacement Parts and Consumables
Auger Pin
2121PAK3	Auger Pin All 2135, 2350, 4400/4450 Series Augers, Non-flighted extension and Couplers plus, 5500 Series Flighted Extensions
2021PAK3	Auger Pin PLDBH/PSD Ground Hog® Type Augers and Non-Flighted Extension
Auger Replacement Blades
Here is a breakdown of the Auger Teeth - 35 Standard Dirt Tooth, 35HFC Hardfaced Dirt Tooth, 5T30 Chisel Type Dirt Tooth, 5T30 Chisel Type Dirt Tooth w/Tungsten Carbide overlay, 1336 Tungsten Carbide Tooth. Application for All augers equipped with a Pengo type boring head (For use on ANY General Auger Bit sold)
35PAK7	Cross section for fast penetration. Wears sharp. Install in all boring head sockets.
35HFCPAK7	** BEST SELLER - Hardfacing substantially increases the wear life over the 35 Standard Dirt Tooth. Install in all boring head sockets with hardfacing up.
5T30PAK3	Rips through caliche, hardpan and other formations. Install only in the inside sockets of the boring head with rib facing up. Not for use alone. Must be used in combination with other type teeth.
5T30CPAK3	Rips through caliche, hardpan and other formations. For install in inside, boring head sockets only, rib side facing up. Not for use alone w/6 inch diameter auger. Includes RUB-R-LOK. Pack of 3.
1336PAK2	For use in extremely abrasive and frozen soil. Delivers extended wear life over the standard dirt tooth. Use in rocky soils may shatter inserts.
Replacement Auger Screw Bits
SB26PAK3	Use in most soils. Thin cross section for fast penetration. Install in all 4450 series augers 2350 Series 4 inch Through 12 inch Diameter Augers. 4450, BT400 and PLDBH Series Earth Augers equipped with an LDBH type boring head.
Auger Couplers or use with 300 Series Hole Diggers
4400-2CLR	1-3/8 inch female hexagon to 13/16 inch male hexagon pin. Allows the 330H and 332H to utilze the 4400-2E3 earth auger and 5500-2X3 auger extension.
4400-3CLR	1-3/8 inch female hexagon to 1-1/8 inch male hexagon pin. Allows the 330H and 332H Hole Diggers to utilize the 4400-3E3 earth auger and 5500-3X3 auger extension.

PSD Series Augers Models and Accessories
348H	Epic Series Teo Man Hole Digger 2 - 18 inch

PSD Series Augers and Extension
GROUND HOG Models C71-5, D5 and 1M Series Earth Drills, 343H and 348H Two Man Hole Diggers and 660 DIG-R-MOBILE with 660-7CLR auger connection coupler (GROUND HOG 7/8 inch square). Equipped with full length auger flighting and Pengo type CSA boring head with hardfaced teeth. Augers range in size from 4.5 to 19.5 inches in diameter with flighted augers and non-flighted extension. Drive connection GROUND HOG 7/8 inch square
Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
PSD4	4 inch	4.5 inch	3 Feet	18 lbs
PLDBH6	6 inch	7.5 inch	3 Feet	22 lbs
PLDBH8	8 inch	9.5 inch	3 Feet	28 lbs
PLDBH10	10 inch	11.5 inch	3 Feet	34 lbs
PLDBH12	12 inch	13.5 inch	3 Feet	43 lbs
PSD14	14 inch	15.6 inch	3 Feet	54 lbs
PSD16	16 inch	17.5 inch	3 Feet	58 lbs
PSD-18P	18 inch	19.5 inch	3 Feet	52 lbs
PSD Series (GROUND HOG TYPE) Auger Extension
PSD-15X	No Flighting	N / A	7/8 inch square Digging Depth	6 lbs
PSD-18P is a planting auger with flighting length of 9 inches intended for shallow digging. Not available with full length flighting

242H EPIC SERIES ONE MAN HOLE DIGGER

The 242H EPIC Series hand-held Hole Digger features an all position, 4-stroke engine. No mixing oil with gas or separate fuel cans. And, no more smoky exhaust with a Honda engine that meets current EPA emission standards. The 242H is built with professional features that make it ideal for both contractors and homeowners alike. Performance to dig up to an 8 inch diameter hole in a variety of soil classifications. Built with oversized bearings, heat treated shafts and precise, machine-cut gears designed to deliver long service life and high ROI.

The unique, ergonomically engineered Power-GRIP operator handle helps maximize control, strength and balance plus, dampens vibration and reduces the effects of kickback and body fatigue while increasing overall digging comfort, productivity and jobsite safety.

The 242H is also equipped with the convenient Auger-LOK for removing stuck augers. For use with the 2135 Series earth augers and auger extension.

Features:

All metal centrifugal clutch
Precision, spur gear transmission
Comfort Zone operator handle
Magura twist grip throttle control

POWER SOURCE

Type: Honda GX35, all-position, 4 Stroke
Horsepower: 1.3
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

TRANSMISSION

Type: Totally-enclosed, spur gear, grease-lubricated
Nominal Auger Rotation Speed: 166 RPM, no load
Clutch: 3 inch diameter, all-metal, automatic-centrifugal, slips on overload.
Driveshaft Connection: 1 inch round
Maximum Drilling Torque: 51 ft. lbs.

AUGER

Diameter Range: 2 to 8 inch
Standard Digging Depth: 30 inch Auger Extension: Non-flighted, plain tube, extends depth to 45 inch

262H EPIC SERIES TWO MAN HOLE DIGGER

The 262H EPIC Series hand-held Hole Digger offers an uncompromising balance of power, performance and utility in a lightweight, two-man Hole Digger. Its Honda engine directly mounts to a totally enclosed, oil-lubricated transmission for maximum efficiency and is equipped with the convenient Auger-LOK for removing stuck augers. Inside a high capacity, all-metal centrifugal clutch delivers maximum digging power and consistent performance over an extended service life.

The exclusive Power-Flex ergonomically engineered composite operator handles maximize control, strength and balance while helping to dampen vibrations. The effects of kickback and fatigue are reduced while increasing overall digging comfort, productivity and jobsite safety. The smooth operating, 4-stroke engine meets applicable emission and noise standards and provides the competitive edge when tackling the tough demands of both industrial and construction related hole digging projects.

The 262H Hole Digger is ideally suited for the home owner and small contractor alike. for use with the 2135 Series earth augers and auger extension.

POWER SOURCE

Type: Honda GCV160, 4 Stroke
Horse Power: 4.4 HP
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

TRANSMISSION

Type: Totally-enclosed, spur geared, double reduction oil bath lubricated
Nominal Auger Rotation Speed: 162 RPM, no load
Clutch: 3 inch (76mm) diameter all-metal automatic-centrifugal, slips on overload
Drive shaft Connection: 1 inch (25.4mm) Round
Maximum Drilling Torque: 134 ft. lbs. (182 N.m)
Transmission Lock: Manually deployed

AUGER

Diameter: 2 inch (51mm) to 12 inch (305mm)
Extension: Non-flighted plain tube, depth to 45 inch (1143mm)

332H EPIC SERIES TWO MAN HOLE DIGGER

The 332H EPIC Series hand-held Hole Digger is designed to tackle a wide range of construction related hole digging projects...from simple backyard fencing to complex landscaping and soil sampling.

Each is built with a time-proven transmission that includes oversized bearings, heat treated shafts and precision, machine-cut gears that has created an industry wide reputation for delivering long service life and exceptional ROI. All with the power and performance to dig up to 18 inch (457 mm) diameter holes in a wide variety of soil classifications. When an auger becomes stuck use the convenient Auger-LOK to remove it.

The exclusive Power-Flex ergonomically engineered composite operator handles maximize control, strength and balance while helping to dampen vibrations. The effects of kickback and fatigue are reduced while increasing overall digging comfort, productivity and jobsite safety. For use with the 4400 Series earth augers and 5500 Series auger extensions

POWER SOURCE

Type: GXV160 Honda,4 Stroke
Horse Power: 5.5 HP
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

TRANSMISSION

Type: Totally-enclosed,spur geared, double reduction oil bath lubricated
Nominal Auger Rotation Speed: 3600 RPM, 144 rpm, no load
Clutch: 3 inch (76mm) diameter all-metal automatic-centrifugal, slips on overload.
Drive shaft Connection: 1-3/8 inch (35mm) Hexagon
Maximum Drilling Torque: 190 ft. lbs. (74 N.m)

AUGER

Diameter: 2 inch (51mm) to 18 inch (457mm)
Extention: Flighted and Non-flighted plain tube, depth to 45 inch (1143mm)

348H EPIC SERIES TWO MAN HOLE DIGGER

The 348H EPIC Series hand-held Hole Digger is designed to tackle a wide range of construction related hole digging projects...from simple backyard fencing to complex landscaping and soil sampling.

Each is built with a time-proven transmission that includes oversize bearings, heat treated shafts and precision, machine-cut gears that has created an industry wide reputation for delivering long service life and exceptional ROI. All with the power and performance to dig up to 18 inch (457 mm) diameter holes in a wide variety of soil classifications. When an auger becomes stuck use the convenient Auger-LOK to remove it.

The exclusive Power-FLEX ergonomically engineered composite operator handles maximize control, strength and balance while helping to dampen vibrations. The effects of kickback and fatigue are reduced while increasing overall digging comfort, productivity and jobsite safety. For use with PSD/PLDBH Series augers and auger extension.

POWER SOURCE

Type: GXV160 Honda, All- Position, 4 Stroke
Horse Power: 5.5 HP
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

TRANSMISSION

Type: Totally-enclosed, grease- lubricated
Nominal Auger Rotation Speed: 3600 RPM, no load
Clutch: 3 inch (76mm) diameter all-metal automatic-centrifugal, slips on overload.
Drive shaft Connection: 7/8 inch (22mm) Ground Hog Type
Maximum Drilling Torque: 190 ft. lbs. (74 N.m)

AUGER

Diameter: 2 inch (51mm) to 18 inch (457mm)
Extention: Flighted and Non-flighted plain tube, depth to 45 inch (1143mm)


242H EPIC Series One Man Hole Digger	262H EPIC Series Two Man Hole Digger	332H EPIC Series Two Man Hole Digger	348H EPIC Series Two Man Hole Digger