Technical Sales 1–800–458–3687

4400 Series AugersBits - 1-3/8" Hex Connection

 

4400 Series Augers Part No. Flighting OD Cutting Dia Weight
4400_8E3a.jpg 4400-2E3 2-1/4 inch 2.5 inch 19 lbs
4400-3E3 3-1/4 inch 3.5 inch 13 lbs
4400-4E3 4 inch 4.5 inch 19 lbs
4410-4E3 4 inch 4.5 inch 19 lbs
4450-6E3 6 inch 7.5 inch 24 lbs
4450-8E3 8 inch 9.5 inch 30 lbs
4450-10E3 10 inch 11.6 inch 36 lbs
4450-12E3 12 inch 13.6 inch 48 lbs
4400-16E3 16 inch 17.2 inch 61 lbs
4400-18P* 18 inch 19.7 inch 40 lbs
*Denotes a planting auger with 9 inch length flighting intended for shallow digging. Not available with full lenght flighting

 

4400 Series Augers - Drive connection: 1-3/8 inch Hex

General Equipment Company offers a complete line of earth augers and extension for the M210 and M240 Hole Diggers. Augers range in size from 2" to 8 " in diameter with flighted augers and non-flighted extension. Drive connection 1 inch round ONLY


coupler
Part No.
Description
Weight
4400-2CLR 1-3/8 inch female hexagon box to 13/16 inch male hexagon pin. Allows the 330H to utilze the 4400-2E3 earth auger and 5500-2X3 auger extensions.
4 lbs
4400-3CLR 1-3/8 inch female hexagon box to 1-1/8 inch male hexagon pin. Allows the 330H Hole Digger to utilize the 4400-3E3, 4410-4E3 earth augers and 5510-4X3 auger extensions.
4 lbs

5500 Series Augers - Drive connection: 1-3/8 inich hexagon

General Equipment Company offers a complete line of earth augers and extention for the M330H and 660 GID-R-MOBILE hole diggers. Auger Extensions range in size from 2.5" to 12" in diameter. Drive connection 1-3/8 inch Hex. If you do not find what you are looking for please contact our sales team @ 1-800-4589-3687

 5500 Series Augers Extensions (Flighting)
s-h alt
Part No.
Flighting OD
Digging Depth
Weight
5500-2X3
2-1/4 inch
3 feet
9 lbs
5500-3X3
3-1/4 inch
3 feet
14 lbs
5500-4X3
4 inch
3 feet
18 lbs
5500-6X3
6 inch
3 feet
20 lbs
5500-8X3
8 inch
3 feet
24 lbs
5500-10X3
10 inch
3 feet
30 lbs
5500-12X3
12 inch
3 feet
40 lbs
 5500 Series Augers Extension  (No Flighting)
s-h alt
Part No.
Flighting OD
Digging Depth
Weight
5500-15X
No Flighting
15 inches
8 lbs

 

Replacement Auger  Screw Bits


 

  

  

 

  

  

 

  

  

 

  

  

 

  

  

 

  

  

 

  

  

 

  

  

 
Part No.
 
Description
 
Application
s-h alt
 

SB25

OLD STYLE
for Auger Bits purchased
BEFORE  2013

Screw Bit

  Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters.   4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.

SB26

NEW STYLE
for Auger Bits purchased
AFTER  2013

Screw Bit

  Use in most soils. Thin cross section for fast penetration. Install in all Pengo type ngers except 3 and 4 inch iameters.   4450,  Series Earth Augers equipped with a Pengo type boring head.

SB25C

Screw Bit

  Also available with Tungsten
Carbide overlay to increase
wear life.
  4400, BT360 and PSD Series Earth Augers equipped with a Pengo type boring head.

s-h alt

SB35

Screw Bit

  Use in most soils. Thin cross
section for fast penetration.
  4400-3E3, 5500-3E5 augers, and
4710, 4750, 6710, 6750, Series
EarthAugers.

SB35C

Screw Bit

  Also available with Tungsten
Carbide overlay to increase
wear life.
  4400-3E3, 5500-3E5 augers, and
4710, 4750, 6710, 6750, Series
EarthAugers.

s-h alt

SB45

Screw Bit

  Use in most soils. Thin cross
section for fast penetration
  4400-4E3, 5500-4E3, 4410-4E3,
5510-4E3

 

 
Part No.
Description
Application
s-h alt

35HFC Hardfaced

Dirt Tooth

Hardfacing substantially increases the wear life over the 35 Standard Dirt Tooth. Install in all boring head sockets with hardfacing up. All augers equipped with a Pengo type boring head
 
 
   
s-h alt

5T30
Chisel Type

Dirt Tooth

Rips though caliche, hardpan and
other formations. Install only in the inside sockets of the boring head with rib facing up. Not for use alone
All augers equipped with a Pengo type boring head.
 
 
   
s-h alt

1336 Tungsten

Carbide Tooth

For use in extremely abrasive and frozen soil. Delivers extended wear life over the standard dirt tooth. Use in rocky soils may shatter inserts. All augers equipped with a Pengo type boring head.

 

There is no further information.
4400-2E3
AUGER, 2D, 36L, .81HEX
Mfg. item #: 4400-2E3
GEN4400-2E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$220.21

213
4400-3E3
AUGER, 3D, 36L, 1.12HEX
Mfg. item #: 4400-3E3
GEN4400-3E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$235.14

213
4400-4E3
AUGER, 4D, 36L, 1.38HEX - AUGER BIT. DIGS A 4 INCH NOMINAL DIAMETER HOLE UP TO 36 INCHES DEEP. HEAT TREATED, ALLOY STEEL SB45 SCREW BIT IS FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 19 LBS
Mfg. item #: 4400-4E3
GEN4400-4E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$229.25

213
4410-4E3
AUGER, 4D, 36L, 1.12HEX
Mfg. item #: 4410-4E3
GEN4410-4E3
Free shipping to most locations in lower 48 states.22
$222.81

1643
4450-6E3
AUGER, 6D, 36L, 1.38HEX - AUGER BIT. DIGS A 6 INCH NOMINAL DIAMETER HOLE UP TO 36 INCHES DEEP. HEAT TREATED, ALLOY STEEL WEAR PARTS ARE FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 22 LBS
Mfg. item #: 4450-6E3
GEN4450-6E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$247.63

213
4450-8E3
AUGER, 8D, 36L, 1.38HEX - AUGER BIT. DIGS AN 8 INCH NOMINAL DIAMETER HOLE UP TO 36 INCHES DEEP. HEAT TREATED, ALLOY STEEL WEAR PARTS ARE FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 29 LBS
Mfg. item #: 4450-8E3
GEN4450-8E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$256.38

213
4450-10E3
AUGER, 10D, 36L, 1.38HEX - AUGER BIT. DIGS A 10 INCH NOMINAL DIAMETER HOLE UP TO 36 INCHES DEEP. HEAT TREATED, ALLOY STEEL WEAR PARTS ARE FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 35 LBS
Mfg. item #: 4450-10E3
GEN4450-10E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$270.38

213
4450-12E3
AUGER, 12D, 36L, 1.38HEX - AUGER BIT. DIGS A 12 INCH NOMINAL DIAMETER HOLE UP TO 36 INCHES DEEP. HEAT TREATED, ALLOY STEEL WEAR PARTS ARE FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 44 LBS
Mfg. item #: 4450-12E3
GEN4450-12E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$288.75

213
4400-16E3
AUGER, 16D, 36L, 1.38HEX - AUGER BIT. DIGS A 16 INCH NOMINAL DIAMETER HOLE UP TO 36 INCHES DEEP. HEAT TREATED, ALLOY STEEL WEAR PARTS ARE FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 60 LBS
Mfg. item #: 4400-16E3
GEN4400-16E3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$557.83

213
4400-18P
AUGER, 18D, 30L, 1.38HEX - AUGER BIT. DIGS AN 18 INCH NOMINAL DIAMETER HOLE UP TO 18 INCHES DEEP. HEAT TREATED, ALLOY STEEL WEAR PARTS ARE FIELD REPLACEABLE.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 40 LBS
Mfg. item #: 4400-18P
GEN4400-18P
Call for freight quote on this item or we will confirm freight charges before shipping.1
$522.86

213
4400-2CLR
CPLR, 1-3/8 BOX TO 13/16 PIN
Mfg. item #: 4400-2CLR
GEN4400-2CLR
Call for freight quote on this item or we will confirm freight charges before shipping.1
$104.50

213
4400-3CLR
CPLR, 1-3/8 BOX TO 1-1/8 PIN
Mfg. item #: 4400-3CLR
GEN4400-3CLR
Call for freight quote on this item or we will confirm freight charges before shipping.1
$104.50

213
5500-2X3
EXTENSION, 2D, 36L, .81HEX
Mfg. item #: 5500-2X3
GEN5500-2X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$192.22

213
5500-3X3
EXTENSION, 3D, 36L, 1.12HEX
Mfg. item #: 5500-3X3
GEN5500-3X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$216.48

213
5500-4X3
EXTENSON, 4D, 36L, 1.38HEX, NLA *** THIS IITEM IS NO LONGER AVAILABLE FROM GENERAL
Mfg. item #: 5500-4X3
GEN5500-4X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

213
5500-6X3
EXTENSION, 6D, 36L, 1.38HEX, NLA *** THIS IITEM IS NO LONGER AVAILABLE FROM GENERAL
Mfg. item #: 5500-6X3
GEN5500-6X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

213
5500-8X3
EXTENSION, 8D, 36L, 1.38HEX, NLA *** THIS IITEM IS NO LONGER AVAILABLE FROM GENERAL
Mfg. item #: 5500-8X3
GEN5500-8X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

213
5500-10X3
EXTENSION, 10D, 36L, 1.38HEX
Mfg. item #: 5500-10X3
GEN5500-10X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$254.74

213
5500-12X3
EXTENSION, 12D, 36L, 1.38HEX
Mfg. item #: 5500-12X3
GEN5500-12X3
Call for freight quote on this item or we will confirm freight charges before shipping.1
$283.66

213
5500-15X
EXTENSION, 0D, 15L, 1.38HEX - AUGER EXTENSION. EXTENDS AUGER DIGGING DEPTH UP TO 15 INCHES.** STILL PROUDLY MADE IN THE USA - SHIPS FED-EX OR UPS EST WEIGHT = 8 LBS
Mfg. item #: 5500-15X
GEN5500-15X
Call for freight quote on this item or we will confirm freight charges before shipping.1
$105.44

213
SB25
BIT, SCREW, 2.5D
Mfg. item #: SB25
GENSB25
Call for freight quote on this item or we will confirm freight charges before shipping.1
$14.29

213
SB26
BIT, SCREW, 2.5D
Mfg. item #: SB26
GENSB26
Call for freight quote on this item or we will confirm freight charges before shipping.1
$17.43

213
SB25C
BIT, SCREW, TCT, 2.5D
Mfg. item #: SB25C
GENSB25C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$41.90

213
SB35
BIT, SCREW, 3.5D
Mfg. item #: SB35
GENSB35
Call for freight quote on this item or we will confirm freight charges before shipping.1
$34.25

213
SB35C
BIT, SCREW, TCT, 3.5D
Mfg. item #: SB35C
GENSB35C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$68.40

213
SB45
BIT, SCREW, 4.5D - REPLACEMENT SB45 SCREW BIT FOR USE WITH 4400-4E3 AUGER. - SHIPS FED-EX OR UPS EST WEIGHT = 3 LBS
Mfg. item #: SB45
GENSB45
Call for freight quote on this item or we will confirm freight charges before shipping.1
$61.54

213
35HFC
35HFCA REPLACEMENT HARDFACED DIRT TOOTH, FOR EARTH AUGER **SHIPPING WEIGHT = 15 LBS
Mfg. item #: 35HFC
GEN35HFC
"Ships by UPS, see freight calculator at checkout."2
$6.15

746
5T30
5T30A SERIES REPLACEMENT CHISEL TYPE DIRT TOOTH **SHIPPING WEIGHT = 11 LBS
Mfg. item #: 5T30
GEN5T30
"Ships by UPS, see freight calculator at checkout."2
$5.50

746
1336
TOOTH, TCT
Mfg. item #: 1336
GEN1336
Call for freight quote on this item or we will confirm freight charges before shipping.1
$21.48

213
Copyright © 2021 Smith-Hamilton, Inc
0.023 201111 15:40