6750 Series Augers Bits - 2-9/16" Hex 

Picture

6750 Series Augers	Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
	6750-6PE4	6 inch	N/A	4 feet	70 lbs
	6750-6PE5	6 inch	N/A	5 feet	85 lbs
	6750-9PE4	8 inch	N/A	4 feet	80 lbs
	6750-6PE5	8 inch	N/A	5 feet	95 lbs
	6750-12PE4	12 inch	N/A	4 feet	108 lbs
	6750-12PE5	12 inch	N/A	5 feet	130 lbs
	6750-16PE4	16 inch	N/A	4 feet	130 lbs
	6750-16PE5	16 inch	N/A	5 feet	160 lbs
	6750-18PE4	18 inch	N/A	4 feet	140 lbs
	6750-18PE5	18 inch	N/A	5 feet	170 lbs
	6750-24PE4	24 inch	N/A	4 feet	250 lbs
	6750-24PE5	24 inch	N/A	5 feet	280 lbs
	6750-30PE4	30 inch	N/A	4 feet	313 lbs
	6750-30PE5	30 inch	N/A	5 feet	350 lbs
	6750-36PE4	36 inch	N/A	4 feet	375 lbs
	6750-36PE5	36 inch	N/A	5 feet	420 lbs

At a Glance
extensions
Couplers
auger screw bits
auger teeth

6750 Series Augers - Drive connection: 2-9/16 inch round

Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6750 Series auger utilize a PengoÂ® TYPE LDOBH cast steel boring heads. For use with either the M753-16 and M753-24 Series DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2-9/16 inch round auger drive connection.

6780 Series Auger Extensions - Drive connection: 2-9/16 inch round

Available in 4 foot and 5 foot effective digging depths. Each equipped with a 3/8 inch thickness, single pitch sectional or helicond flighting the full length of the auger axle. 6750 Series auger utilize a Pengo TYPE LDOBH cast steel boring heads. For use with either theSeries DIG-R-TACH and competitive models of popular hydraulic power earth drilling attachments utilizing a 2-9/16 inch round auger drive connection.

6780 Series Auger Extensions - Drive connection: 2-9/16 inch round
Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6780-6X4	6 inch	N/A	4 feet	60 lbs
6780-6X5	6 inch	N/A	5 feet	75 lbs
6780-9X4	8 inch	N/A	4 feet	65 lbs
6780-9X5	8 inch	N/A	5 feet	80 lbs
6780-12X4	12 inch	N/A	4 feet	91 lbs
6780-12X5	12 inch	N/A	5 feet	113 lbs
6780-16X4	16 inch	N/A	4 feet	109 lbs
6780-16X5	16 inch	N/A	5 feet	136 lbs
6780-18X4	18 inch	N/A	4 feet	118 lbs
6780-18X5	18 inch	N/A	5 feet	148 lbs
6780-24X4	24 inch	N/A	4 feet	221 lbs
6780-24X5	24 inch	N/A	5 feet	251 lbs
6780-30X4	30 inch	N/A	4 feet	276 lbs
6780-30X5	30 inch	N/A	5 feet	313 lbs
6780-36X4	36 inch	N/A	4 feet	330 lbs
6780-36X4	36 inch	N/A	5 feet	375 lbs

6780 Series Auger Extensions (No Flighting) - 2-9/16" HEX Connection

Part No.	Flighting OD	Cutting Dia	Digging Depth	Weight
6780-15X	No Flighting	N/A	15 inches	25 lbs
6780-36X	No Flighting	N/A	3 feet	36 lbs

Couplers for use with 671/751 DIG-R-TACH
	Part No.	Description	Weight
	6700-4CLR	Adapts Lowe earth auger with 2-9/16 inch round auger connection to Series 671 DIG-R-TACH with 2 inch hexagon auger connection (3/4 inch diameter pin).	20 lbs
	6700-5CLR	Adapts Danuser earth auger with 2-9/16 inch diameter round auger connection to Series 671 DIG-R-TACH with 2 inch hexagon auger connection (1/2 inch diameter pin).	20 lbs

Part No.	Description	Application
SB35 Screw Bit	Use in most soils. Thin cross section for fast penetration.	4400-3E3, 5500-3E5 augers, and 4710, 4750, 6710, 6750, Series EarthAugers.
SB35C Screw Bit	Also available with Tungsten Carbide overlay to increase wear life.	4400-3E3, 5500-3E5 augers, and 4710, 4750, 6710, 6750, Series EarthAugers.

Part No.	Description	Application

5T30 Chisel Type Dirt Tooth	Rips though caliche, hardpan and other formations. Install only in the inside sockets of the boring head with rib facing up. Not for use alone	All augers equipped with a Pengo type boring head.

1336 Tungsten Carbide Tooth	For use in extremely abrasive and frozen soil. Delivers extended wear life over the standard dirt tooth. Use in rocky soils may shatter inserts.	All augers equipped with a Pengo type boring head.

6750 Series Augers Bits - 2-9/16" Hex&nbsp;

6750 Series Augers Bits - 2-9/16" Hex