chat now with southern tool
Technical Sales 1–800–458–3687

General Equipment EP12AC Non-hazardous L

 

 

EP12AC.jpg

/store/cms//77.jpg

 

NON-HAZARDOUS LOCATIONS

The industry's most complete line of confined space and positive pressure type ventilation products designed for use in non-hazardous locations. Steel, cast aluminum and high strength plastic construction. Choose from AC and DC electric or gasoline power sources along with a complete line of ducts and related storage accessories.

EP12AC NON-HAZARDOUS AIR VENTILATION BLOWER

3/4 HP, 115 volt AC, 60 Hz, single phase, capacitor start electric motor. NEMA 5-15P grounded cord cap. 12 inch nominal inlet and outlet diameter. 12 gauge, rolled steel blower housing construction; aluminum and composite fan construction; rubber anti- vibration mounting. Less duct. Free Air Flow: 1526.7 CFM Generals line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8 inch and 12 inch diameter units with power choice of gasoline, 12 VDC or 115 VAC. Both radial and axial configurations available for the most demanding air flow applications. There are no plastic frame parts to crack. Constructed with heavy gauge aluminum and steel. All General blowers offer laboratory certified air flow rates with independent, third-party testing.

  • Power Source: 3/4 HP, 115 volt AC, 60 Hz motor
  • Duct Diameter: 12 inches
  • Free Air Flow: 1526.7 CFM

Download  (PDF) Files

 

EP12AC NON-HAZARDOUS AIR VENTILATION BLOWER

3/4 HP, 115 volt AC, 60 Hz, single phase, capacitor start electric motor. NEMA 5-15P grounded cord cap. 12 inch nominal inlet and outlet diameter. 12 gauge, rolled steel blower housing construction; aluminum and composite fan construction; rubber anti- vibration mounting. Less duct. Free Air Flow: 1526.7 CFM General’s line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8 inch and 12 inch diameter units with power choice of gasoline, 12 VDC or 115 VAC. Both radial and axial configurations available for the most demanding air flow applications. There are no plastic frame parts to crack. Constructed with heavy gauge aluminum and steel. All General blowers offer laboratory certified air flow rates with independent, third-party testing.

Specifications:


POWER SOURCE
Type: 3/4 HP (.20kw), 60 Hz, 115/230 volts, single phase
RPM: 3200
Speed Control: Single Speed

BLOWER
Type: Axial
Material: Formed Steel
Wheel Type: Aluminum/plastic MultiWing® axial
Size: 12 inch (305 mm) Nominal Diam. inlet/ Outlet

GENERAL
Mounting: Rubber
Type: Anti-Vibration
Weight: 65 lbs (29.5 kg)

DIMENSIONS
Height: 15-1/2 inch (394 mm) Length: 18-1/2 inch (470 mm) Width: 12-5/8 inch (321 mm)

FLOW RATES
Free Air: 1526.7 CFM (42.6 cmm)
One 90 Degree Bend: 1317.4 CFM (36.8 cmm) with 25 ft duct
Two: 90 Degree Bends: 1300.1 CFM (36.3 cmm) with 25 ft duct

Non-hazardous Standard Ducts


 
Part No.
Description
s-h alt
DUC-PAC 12 inch nominal diameter x 25 foot length, vinyl coated, synthetic fabric construction; wire helix reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends. Complete with integral storage bag.
 
DUC-PAC 12 inch nominal diameter x 50 foot length, vinyl coated, synthetic fabric construction; wire helix reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends. Complete with integral storage bag.
     

Duct Coupler


 
Part No.
Description
s-h alt

Allows two lengths of 12 inch nominal diameter flexible duct to be attached together with clamps. Heavy duty, 24 gauge, galvanized or stainless steel construction. For use in non-hazardous locations only. Increased duct length can substantially reduce air flow rate.

LIMITED PRODUCT WARRANTY


GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operators Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

EP12ACP
BLOWER, ELECTRIC, 12D, 1.0HP, 115VAC
Mfg. item #: EP12ACP
GENEP12ACP
Free shipping to most locations in lower 48 states.22
$332.29

150
FD1225
Mfg. item #: FD1225
GENFD1225
Free shipping to most locations in lower 48 states.22
$187.13

150
FD1250
Mfg. item #: FD1250
GENFD1250
Free shipping to most locations in lower 48 states.22
$371.64

150
FD12C
Mfg. item #: FD12C
GENFD12C
Free shipping to most locations in lower 48 states.22
$55.00

150
Copyright © 2017 Smith-Hamilton, Inc
0.006 170623 12:12