General Equipment EP8 Non-hazardous Loca

NON-HAZARDOUS LOCATIONS

The industrys most complete line of confined space and positive pressure type ventilation products designed for use in non-hazardous locations. Steel, cast aluminum and high strength plastic construction. Choose from AC and DC electric or gasoline power sources along with a complete line of ducts and related storage accessories.

EP8 NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

• Power Source: 1/3 HP, 115 volt AC, 60 Hz motor
• Fan Type: Centrifugal
• Duct Diameter: 8 inches
• Free Air Flow: 1277.4 CFM

Download  (PDF) Files

EP8 Non-Hazardous Electric Blower Operator Manual

EP8 NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

Specifications:

POWER SOURCE
Type: 1/3 HP (23kw), 60Hz, 115 Volts, AC, Single Phase
RPM: 1725
Speed Control: Single Speed

BLOWER

• Type: Radial
• Material: Cast aluminum
• Wheel Type: Steel
• Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet

GENERAL

• Mounting: Rubber
• Type: Anti-Virbration
• Weight: 53 lbs (24 kg)

DIMENSIONS

• Height: 19-3/4 inch (502 mm) Length: 18-1/4 inch (464 mm) Width: 14-1/2 inch (368 mm)

FLOW RATES

• Free Air: 1277.4 CFM (35.7 cmm
• One 90 Degree Bend: 738 CFM (20.7 cmm)
• Two: 90 Degree Bends: 578.8 CFM (16.2 cmm)