chat now with southern tool
Technical Sales 1–800–458–3687

General Equipment GP8H Non-hazardous Loc

NON-HAZARDOUS LOCATIONS

The industrys most complete line of confined space and positive pressure type ventilation products designed for use in non-hazardous locations. Steel, cast aluminum and high strength plastic construction. Choose from AC and DC electric or gasoline power sources along with a complete line of ducts and related storage accessories.

GP8H NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

  • Power Source: 4 HP Honda
  • Fan Type: Radial
  • Duct Diameter: 8 inches
  • Free Air Flow Rate: 1561.6 CFM

Download  (PDF) Files

GP8 Series Non-Hazardous Gas Blowers Operator Manual

GP8H NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

Specifications:


POWER SOURCE

  • Type: 3.5 HP (2.4kw), Honda, GX120, 4-Cycle engine
  • RPM: 3600
  • Speed Control: Governor with manual speed control, adjustable to vary blower volume

BLOWER

  • Type: Radial
  • Material: Cast aluminum
  • Wheel Type: Steel
  • Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet

GENERAL

  • Mounting: Spring
  • Type: Anti-Virbration
  • Weight: 56 lbs (25 kg)

DIMENSIONS

  • Height: 20-1/2 inch (521 mm) Length: 18 inch (457 mm) Width: 16-1/4 inch (413 mm)

FLOW RATES

  • Free Air: 1561.6 CFM (44.2 cmm)
  • One 90 Degree Bend: 1178.1 CFM (33.3 cmm)
  • Two: 90 Degree Bends: 1066.2 CFM (30.2 cmm)

Non-hazardous Standard Ducts


 
Part No.
Description
s-h alt

DUC-PAC 8 inch nominal diameter x 15 foot length, vinyl coated, synthetic fabric construction; wire helix reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends Complete with integral storage bag.

 

DUC-PAC 8 inch nominal diameter x 25 foot length, vinyl coated, synthetic fabric construction; wire helix  reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends. Complete with integral storage bag.

Non-hazardous Collapsible Ducts


 

8 inch nominal diameter x 15 foot length. Same physical appearance and construction of standard ducts. Flexible helix section deforms to allow personnel to egress the manhole without permament duct damage. For use in non-hazardous locations only.


 
8 inch nominal diameter x 25 foot length. Same physical ppearance and construction of standard ducts. Flexible Helix section deforms to allow personnel to egress the manhole without permament duct damage. For use in non-hazardous locations only.

Storage Canisters


 
Part No.
Description
s-h alt
SC8

Storage Canister, for use with both FD815 and FD825 collapsible ducts. Heavy duty, 16 gauge, welded steel construction with lockable cover and carry handle. Bright enamel finish. For use in non-hazardous locations only.

Storage Racks


s-h alt
SR8

Storage Rack, for use with FD815, FD825 and ICD815 collapsible
ducts. Heavy duty, 11 gauge, welded steel construction. Bright
enamel finish. For use in non-hazardous locations only


   
   

Duct Coupler


 
Part No.
Description
s-h alt

Allows two lengths of 8 inch nominal diameter flexible duct to be attached together with clamps. Heavy duty, 24 gauge, galvanized or stainless steel construction. For use in non-hazardous locations only. Increased duct length can substantially reduce air flow rate.

LIMITED PRODUCT WARRANTY


GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operators Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

GP8H
BLOWER, GASOLINE, HONDA¬, 4HP
Mfg. item #: GP8H
GENGP8H
Free shipping to most locations in lower 48 states.22
$944.40

269
FD815
Mfg. item #: FD815
GENFD815
Free shipping to most locations in lower 48 states.22
$94.00

269
FD825
Mfg. item #: FD825
GENFD825
Free shipping to most locations in lower 48 states.22
$122.42

269
CSE815
Mfg. item #: CSE815
GENCSE815
Free shipping to most locations in lower 48 states.22
Call for Price

862
CSE825
Mfg. item #: CSE825
GENCSE825
Free shipping to most locations in lower 48 states.22
Call for Price

862
SC8
Mfg. item #: SC8
GENSC8
Free shipping to most locations in lower 48 states.22
$205.50

269
SR8
Mfg. item #: SR8
GENSR8
Free shipping to most locations in lower 48 states.22
$95.00

269
FD8C
Mfg. item #: FD8C
GENFD8C
Free shipping to most locations in lower 48 states.22
$39.00

269
Copyright © 2017 Smith-Hamilton, Inc
0.008 171006 12:25