Download PDF Files
471 and 553 DIG-R-TACH Models Literature
M471-12 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
Designed to be utilized with compact tractor loader backhoes, mini type excavators and small tractor loaders. Not to be utilized as an earth drilling attachment with
skid steer loaders or any carrier vehicle not equipped with a proper protective barrier to prevent auger contact with the operator during normal operation. Not designed to be mounted to the
dipperstick bucket of compact tractor loader backhoes because of inherent center of gravity limitations. For use with the 4710 Series augers and 6700 Series Auger Extensions. Refer to auger section
for specific details. Less auger
Auger
-
Drive shaft Connection: 2 inch (mm) Hexagon
-
Diameter: 4" (102mm) to 24" (610mm)
-
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
-
Maximum Drilling Torque: 281-425 ft. lbs
Hydraulic System
-
Configuration: Open Type
-
System Flow: 5-10 GPM (19-38 lit/min) at 1500 -3000 PSI
Download PDF File
471 and 553 DIG-R-TACH Models Literature
M471-20 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
Designed to be utilized with compact tractor loader backhoes, mini type excavators and small tractor loaders. Not to be utilized as an earth drilling attachment with skid steer loaders or any
carrier vehicle not equipped with a proper protective barrier to prevent auger contact with the operator during normal operation. Not designed to be mounted to the dipperstick bucket of compact
tractor loader backhoes because of inherent center of gravity limitations. For use with the 4710 Series augers and 6700 Series Auger Extensions. Refer to auger section for specific details. Less
auger.
Specifications:
AUGER
Drive shaft Connection: 2 inch (mm) Hexagon
Diameter: 4" (102mm) to 24" (610mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 456-731 ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 7-12 GPM (27-46 lit/min) at 1500 -3000 PSI
Download PDF File
471 and 553 DIG-R-TACH Models Literature
M553-12 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
Designed to be utilized with compact tractor loader backhoes, mini type excavators and small tractor loaders. Not to be utilized as an earth drilling attachment with
skid steer loaders or any carrier vehicle not equipped with a proper protective barrier to prevent auger contact with the operator during normal operation. Not designed to be mounted to the
dipperstick bucket of compact tractor loader backhoes because of inherent center of gravity limitations. For use with the 4750 Series augers and 6780 Series Auger Extensions. Refer to auger section
for specific details. Less auger.
Specifications:
AUGER
Drive shaft Connection: 2-9/16 inch (mm) round
Diameter: 4" (102mm) to 24" (610mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 281-425 ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 5-10 GPM (19-38 lit/min) at 1500 -3000 PSI
Download PDF File
471 and 553 DIG-R-TACH Models Literature
M553-20 DIG-R-TACH HYDRAULIC HOLE DIGGER ATTACHMENT
Designed to be utilized with compact tractor loader backhoes, mini type excavators and small tractor loaders. Not to be utilized as an earth drilling attachment with
skid steer loaders or any carrier vehicle not equipped with a proper protective barrier to prevent auger contact with the operator during normal operation. Not designed to be mounted to the
dipperstick bucket of compact tractor loader backhoes because of inherent center of gravity limitations. For use with the 4750 Series augers and 6780 Series Auger Extensions. Refer to auger section
for specific details. Less auger.
Specifications:
AUGER
Drive shaft Connection: 2-9/16 inch (mm) round
Diameter: 4" (102mm) to 24" (610mm)
Extension: Flighted and Non-flighted plain tube, depth to 45" (1143mm)
Maximum Drilling Torque: 456-731 ft. lbs.
Hydraulic System
Configuration: Open Type
System Flow: 7-12 GPM (27-46 lit/min) at 1500 -3000 PSI
