The Turbo-Action Series from Graymills is the perfect solution for hands-off, immersion cleaning required for challenging parts cleaning
applications. Turbo-Action total immersion parts cleaners convert the jet stream from Graymills Superflo pumps into powerful, hands-off fluid action that gets parts cleaner, faster without manual
handling or scrubbing. Unlike spray cabinet type cleaners that employ spray nozzles, total immersion cleaners bring cleaning action to every external and internal surface-even blind holes.
Turbo-Action units scour and flush parts clean and are offered in both solvent and heated aqueous versions, with pumps that provide up to 10,000 GPH. The heated aqueous units come standard with
energy-saving insulation and corrosion-resistant, insulated stainless steel-lined lids.
A variety of tank sizes and options, including stainless steel tanks, filtration systems and baskets, ensures the Turbo-Action Series can handle your largest cleaning task, including cylinder
heads, transmission housings, heavy castings, and complex parts.
The efficiency of immersion cleaning allows more time for the cleaning solution to do the work, provides penetration into blind holes, nested or layered parts, maximizes soak time to loosen
contamination, and the Turbo Action of the pump adds to the speed and efficiency of the cleaning process.
With five tank sizes and liquid capacities up to 262 gallons, the largest Turbo Series is also available in solvent or aqueous versions. 10,000 gallon per hour flow ensures effective scouring and
cleaning of parts.
Total Immersion Parts Cleaners
Turbo-Action total immersion parts cleaners convert the jet stream from Graymills heavy duty Superflo pumps into powerful hands-off cleaning
power. Unlike cabinet-type cleaners which employ spray nozzles, total immersion cleaners bring surging cleaning action to every external and internal surface - even blind holes and recesses.
Aggressive turbo agitation of the fluid at 3,000 or 10,000 GPH automatically scours and flushes parts clean
STANDARD FEATURES
-
Total parts immersion provides hands-off cleaning without operator involvement
-
Grid platform supports parts above bottom - allows for all sides of parts to be exposed to cleaning solution
-
Two-inch drain for easy fluid change-out
-
Multiple tank sizes up to 262 gallon capacity
-
Solvent or aqueous models available; some models can be field-retrofit and converted to aqueous versions if cleaning method
changes
-
Fusible safety link closes lid in event of a fire
-
Energy saving insulation and stainless steel lined lids (aqueous only)
-
Refer to voltage options for additional details on wiring options.
OPTIONAL FEATURES
-
Heaters and insulation for aqueous applications
-
Stainless steel tanks ensure long life of unit
-
Filtration system to extend life of cleaning solution
-
Oil removal systems (aqueous only) to help remove any tramp oil and floating contamination
-
Turbo Boost Filtration/Agitation package to clean solution while adding additional in-tank agitation for improved cleaning.
PRODUCT DESCRIPTION
TURBO 4330-8430
With five tank sizes and liquid capacities up to 262 gallons, the largest Turbo Series is available in solvent or aqueous versions. 10,000 gallon per hour flow ensures
effective scouring and cleaning of parts.
AVAILABLE SIZES
-
T4330-B 39-1/2 x 27-1/2 x 23-1/4 inch Immersion space with 142 gallon capacity. Pump delivers 10,000GPH
-
T4330-F 39-1/2 x 27-1/2 x 23-1/4 inch Immersion space with 142 gallon capacity. Pump delivers 10,000 GPH
-
T5430-F 49-1/2 x 27-1/2 x 23-1/4 inch Immersion space with 169 gallon capacity. Pump delivers 10,000GPH
-
T6430-F 59-1/2 x 27-1/2 x 23-1/4 inch Immersion space with 200 gallon capacity. Pump delivers 10,000GPH
-
T7430-F 69-1/2 x 27-1/2 x 23-1/4 inch Immersion space with 231 gallon capacity. Pump delivers 10,000GPH
-
T8430-F 83 x 27-1/2 x 23-1/4 inch
Immersion space with 262 gallon capacity. Pump delivers 20,000GPH
Turbo 4330-8430
The Turbo-Action Series from Graymills is the perfect solution for hands-off, immersion cleaning required for challenging parts cleaning applications. Turbo-Action total
immersion parts cleaners convert the jet stream from Graymills Superflo⢠pumps into powerful, hands-off fluid action that gets parts cleaner, faster without manual handling or scrubbing. Unlike
spray cabinet type cleaners that employ spray nozzles, total immersion cleaners bring cleaning action to every external and internal surface-even blind holes. Turbo-Action units scour and flush
parts clean and are offered in both solvent and heated aqueous versions, with pumps that provide up to 10,000 GPH. The heated aqueous units come standard with energy-saving insulation and
corrosion-resistant, insulated stainless steel-lined lids.
A variety of tank sizes and options, including stainless steel tanks, filtration systems and baskets, ensures the Turbo-Action Series can handle your largest cleaning task, including cylinder
heads, transmission housings, heavy castings, and complex parts.
The efficiency of immersion cleaning allows more time for the cleaning solution to do the work, provides penetration into blind holes, nested or layered parts, maximizes soak time to loosen
contamination, and the Turbo Action of the pump adds to the speed and efficiency of the cleaning process.
Click on the Part Number to be directed below for the prices
|
TURBO ACTIONS - Total Immersion Hot & Colt Tanks
|
|
COLD SOLVENT - 1-1/2 HP PUMPS
|
|
T4330-B
|
142 gal capacity; 230V, 1ph motor
|
|
T4330-F
|
142 gal capacity; 230/460V , 3ph motor
|
|
T5430-F
|
169 gal capacity; 230/460V, 3ph motor
|
|
T6430-F
|
200 gal capacity; 230/460V, 3ph motor
|
|
T7430-F
|
231 gal capacity; 230/460V, 3ph motor
|
|
T8430-F
|
262 gal capacity; 230/460V, 3ph motor, 2 pumps
|
Need Solvents? Click Here
|
Cold Cleaning Super Agitene
|
|
Agitene is the most effective cleaning solvent you can buy. Grease, motor oil, cutting oil and water soluble oils are removed with ease. Contains no
chlorinated solvents and conforms to California rule 66 for clean air. If your regulations require a higher flash point, Super Agitene 141 has a flash point of 141 Fahrenheit (60 C). It
contains no ingredients or characteristics listed as hazardous by the Environmental Protection Agency's RCRA Act.
Features:
-
Grease, motor oil, cutting oil and water soluble oils are removed with ease
-
Gummy deposits unaffected by ordinary mineral spirits are readily softened or removed
-
Contains Hand Ease - a cosmetic-grade lanolin formulation, which replenishes some of the skin's natural oils removed by solvents
-
It helps to reduce the chance of irritation and chapping and leaves a protective coating on parts to help retard corrosion
-
Super Agitene is a low-odor solvent with a 105 degree Fahrenheit flashpoint
-
Should not be used on parts going into a plating or painting process (See regular Agitene)
M5005 - Super Agitene. Ideal for cleaning of metal, plastics and painted surfaces. 5 gallon pail.
M8400 - Super Agitene. Ideal for cleaning of metal, plastics and painted surfaces. 50 gallon drum.
M5005-141 - Super Agitene 141. Has the same attributes as Super Agitene but a higher flash point of 141 degrees Fahrenheit which meets local regulations where
use of High Flash Point Solvent is required. 5 gallon pail. Contains no ingredients listed as hazardous by the EPAs RCRA, Meets OTC VOC regulations
M8400-141 - Super Agitene 141. Has the same attributes as Super Agitene but a higher flash point of 141 degrees Fahrenheit which meets local regulations where
use of High Flash Point Solvent is required. 50 gallon drum. Contains no ingredients listed as hazardous by the EPAs RCRA, Meets OTC VOC regulations, Available in 5 gallon pails and 50
gallon drums
|
|
Cold Cleaning Regular Agitene
|
|
Features:
-
Will not attack varnish, allowing it to be used on varnish-insulated electrical components
M2062 - Regular Agitene. Same high quality cleaning action as Super Agitene, but leaves no film thus making it ideal for cleaning parts to be painted. 5
gallon pail
M1700 - Regular Agitene. Same high quality cleaning action as Super Agitene, but leaves no film thus making it ideal for cleaning parts to be painted. 50
gallon drum
|
|
COLD CLEANING FLUIDS
|
|
Due to our responsibility to ship solvents and detergents which conform to Material Safety Data Sheet descriptions, we cannot accept returns or exchanges of
Agitene and Aquatene cleaners.
|
|
SUPER AGITENE
|
|
M5005
|
5-gallon can
|
|
M8400
|
50-gallon drum
|
|
SUPER AGITENE 141
|
|
M5005-141
|
5-gallon can
|
|
M8400-141
|
50-gallon drum
|
|
REGULAR AGITENE
|
|
M2062
|
5-gallon can
|
|
M1700
|
50-gallon drum
|
|
REGULAR AGITENE 141
|
|
M2062-141
|
5-gallon can
|
|
M1700-141
|
50-gallon drum
|
|
Hot Cleaning Aquatene 330
|
|
A general purpose concentrated detergent in liquid form. Works best when heated up to 140o F (60 C). Ideal for use in free-standing manual systems and
immersion type part washers. Removes soft carbon deposits, light coatings, grease, gummy residue, oils, latex paint, light varnishes, rust preventatives. A five gallon pail makes 25-50
gallons; a 55 gallon drum makes 275-500 gallons, depending on concentration.
Features:
Works most effectively when heated up to 140 degrees Fahrenheit
-
Ideal for use in free-standing manual systems and immersion type parts washers
-
Removes soft carbon deposits, light coatings, grease, gummy residue, oils, latex paint, light varnishes, rust preventatives
-
A five gallon pail makes 25-50 gallons, depending on concentration
-
A 55 gallon drum makes 275-500 gallons, depending on concentration
Use with: DH/PH (hot), Drum Mount (hot), Liftkleen (hot), Turbo Parts Cleaner (hot), Ultrasonic
GM330C5 - Aquatene 330. A general purpose concentrated detergent in liquid form. 5 gallon pail.
GM330C55 - Aquatene 330. A general purpose concentrated detergent in liquid form. 55 gallon drum.
|
|
Hot Cleaning Super Aquatene 360
|
|
A general purpose concentrated cleaner in liquid form can be used up to 180̡̉F for faster cleaning. Ideal for use in free-standing manual systems and
immersion type part washers. Removes all items listed for GM 330 but also effectively cuts buffing and lapping compounds, hard to remove coatings, water-based inks, oxidized oils and heavy
or burned-on varnishes. A five gallon pail makes 25-50 gallons of cleaner; a 55 gallon drum makes 275-500 gallons of cleaner, depending on concentration
Features:
-
Ideal for use in free-standing manual systems and immersion type parts washers
-
Removes all items listed for Aquatene 330 but also effectively cuts buffing and lapping compounds, hard to remove coatings, water-based inks, oxidized oils
and heavy or burned-on varnishes
-
A five gallon pail makes 25-50 gallons of cleaner, depending on concentration
-
A 55 gallon drum makes 275-500 gallons of cleaner, depending on concentration
Cleaning Problem
-
Buffing and Lapping
-
Carbon Deposits, Soft
-
Coatings, Light
-
Grease
-
Gummy Residues
-
Inks, Water Based
-
Oils
-
Oils, Oxidized
-
Paint, Latex
-
Rust Preventatives
-
Varnishes, Burned-On
-
Varnishes, Heavy
-
Varnishes, Light
-
Waxes
Use with: DH/PH (hot), Drum Mount (hot), Liftkleen (hot), Turbo Parts Cleaner (hot), Ultrasonic
GM360C5 - Super Aquatene 360. A general purpose concentrated detergent in liquid form can be used up to 180 degree Fahrenheit for faster cleaning. 5 gallon
pail.
GM360C55 - Super Aquatene 360. A general purpose concentrated detergent in liquid form can be used up to 180 degree Farenheit for faster cleaning. 55 gallon drum.
|
|
Hot Cleaning Super Aquatene 390
|
|
A heavy-duty, low-foam concentrate perfect for use in spray cabinet washers. Ideal for steel, cast iron, and other ferrous metals (not for use on non-ferrous
metals). Removes most greases, light oils, water soluble inks, hardened composites and loose metal chips. Contains a rust inhibitor. A five gallon pail makes 30-40 gallons, a 55-gallon drum
makes 300-450 gallons, depending on concentration. Heat to maximum of 150 degree F.
Features:
-
Ideal for steel, cast iron, and other ferrous metals (not for use on non-ferrous metals)
-
Removes most greases, light oils, water soluble inks, hardened composites and loose metal chips
-
Contains a rust inhibitor
-
A five gallon pail makes 30-40 gallons, depending on concentration
-
A 55-gallon drum makes 300-450 gallons, depending on concentration
-
Heat to a maximum of 150 degrees Fahrenheit
Cleaning Problem
-
Buffing and Lapping
-
Carbon Deposits, Soft
-
Coatings, Light
-
Grease
-
Gummy Residues
-
Oils
-
Oils, Oxidized
-
Paint, Latex
-
Paint, Oil Based
-
Rust Preventatives
-
Varnishes, Burned-On
-
Varnishes, Heavy
-
Varnishes, Light
-
Waxes
Use with: Liftkleen (hot), Spray Washing Cabinet, Tempest, Turbo Parts Cleaner (hot), Ultrasonic
GM390C5 - Super Aquatene 390. A heavy-duty, low-foam concentrate perfect for use in spray cabinet washers. 5 gallon pail.
GM390C55 - Super Aquatene 390. A heavy-duty, low-foam concentrate perfect for use in spray cabinet washers. 55 gallon drum.
|
|
Hot Cleaning Aquatene 571
|
|
Specially formulated for cleaning aluminum and non-ferrous metals. The powdered compound mixes at 3 to 8 ounces per gallon of water. Available in 25 lb
cartons or 100 lb. Fiber drums. Use heated to 180o F (82 C).
Features
-
The powdered compound mixes at 3 to 8 ounces per gallon of water
-
Available in 25 lb cartons or 100 lb fiber drums
-
Use heated to 180 degrees Fahrenheit
Cleaning Problem
-
Carbon Deposits, Soft
-
Coatings, Light
-
Grease
-
Gummy Residues
-
Oils
-
Oils, Oxidized
-
Rust Preventatives
-
Varnishes, Burned-On
-
Varnishes, Heavy
-
Varnishes, Light
-
Waxes
Use with: DH/PH (hot), Drum Mount (hot), Liftkleen (hot), Spray Washing Cabinet, Tempest, Turbo Parts Cleaner (hot)
GM571-25 - Aquatene 571. Specially formulated for cleaning aluminum and non-ferrous metals. 25lb carton.
GM571-100 - Aquatene 571. Specially formulated for cleaning aluminum and non-ferrous metals. 100lb fiber drum.
|
|
HOT CLEANING FLUIDS
|
|
AQUATENE 330
|
|
GM330C5
|
*5-gallon concentrate (makes 25-50 gallons)
|
|
GM330C55
|
55-gallon drum concentrate (makes 275-500 gallons)
|
|
AQUATENE 360
|
|
GM360C5
|
*5-gallon concentrate (makes 25-50 gallons)
|
|
GM360C55
|
55-gallon drum concentrate (makes 275-500 gallons)
|
|
AQUATENE 390 LOW FOAM CLEANING FLUID
|
|
GM390C5
|
*5-gallon concentrate (makes 30-40 gallons)
|
|
GM390C55
|
55-gallon drum concentrate (makes 330-450 gallons)
|
|
AQUATENE 571
|
|
GM571-25
|
25 lbs powdered detergent
|
|
GM571-100
|
100 lbs powdered detergent
|
|
*Individual 5-gallon containers may be shipped UPS with an additional $9.00 packaging, handling charge added to the shipment. Total cost will be considerably
less than common carrier on less than pallet quantities.
|
|
APPROVALS-
|
|
Regular and Super Agitene: U/L file MH3717 And City of N.Y. Approval, Certificate no. 2782
|
Biodegradable Hot Cleaning Fluids Product Description
GM550-QT
Super Biotene 550(Concentrate). A concentrated detergent designed for our Bioremediation models, although it is also a good general purpose cleaner. One quart liquid
concentrate.
GM550-1
Super Biotene 550(Concentrate). A concentrated detergent designed for our Bioremediation models, although it is also a good general purpose cleaner. One gallon liquid
concentrate.
GM660-5
Super Biotene 660(Pre-blended). Same as Super Biotene 550, but in a five-gallon pail of pre-blended, ready-to-use formula
STANDARD FEATURES
-
Super Biotene is an aqueous-based solution that is pH neutral (7.0) mixture of emulsifiers and surfactants containing no
VOCs
-
Available in one quart liquid concentrate that makes five gallons of cleaner or one gallon liquid concentrate that makes 21 gallons of
cleaner
|
Biodegradable Hot Cleaning Fluids
|
|
BIOTENE - SUPER-BIOPAK
|
|
GM660-5
|
5-gallon pre-mixed cleaning fluid
|
|
GM550-QT
|
1-quart concentrate (makes 5 gallons)
|
|
GM550-1
|
1-gallon concentrate (makes 20 gallons)
|
|
GM880-5
|
Super Biotene pre-blended solution, 5 gallon pail
|
|
*Individual 5-gallon containers may be shipped UPS with an additional $9.00 packaging, handling charge added to the shipment. Total cost will be considerably less than common carrier on less
than pallet quantities.
|
|
APPROVALS-
|
|
Regular and Super Agitene: U/L file MH3717 And City of N.Y. Approval, Certificate no. 2782
|
