890F4/890F4-FL
Redesigned with the user in mind

The ICS 890 Series hydraulic cutting system offers the superior strength of FORCE4 technology. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this saw is engineered to stand up to your toughest jobs. In a package that exceeds industry standards this sleek powerhouse is packed with features designed to make it work as hard as you do.

"L" Series Diamond Chain = Longer Life Chain
"S" Series Diamond Chain = Speed Cut - Much More Aggressive Cutting Chain

Portable Power for the Professional Cutter

ICS gas operated power packs are a dependable, self-contained source of hydraulic power that offer superior cooling capacity. The functional, ergonomic design makes them easily transportable to any job site

Updated Models P95-M and P110-M  - These new packs replace the previous P95 and P110. These new packs offer the same compact and portable design, along with superior cooling and are powered with similar Vanguard 18 and 23 hourspower engines.

The signifigant differences are:

• Both power packs are now mechanically governed instead of using an electronic engine control moduale. This design will improve durability in the harsh environments our customers operated in, while reducing longer term repair costs.
• The P110-M model now has three avaliable flow rates 8gmp, 10 gpm, and 12 gpm. The addition of the 10 gpm flow rate will increase the versatility of these packs for use with several other tools on the market.

P95-M 18 hp (13.5 kW) Powerpack
Affordable hydraulic power with exceptional cooling capability in an easy to carry package. Adjustable for 5 gpm or 8 gpm (20 lpm or 30 lpm) operation.

P110-M 23 HP (17 kW) POWERPACK
Step up to the power of the newest addition to the ICS  line of reliable powerpacks. Adjustable to 8 gpm , 10 gpm or 12 gpm (30 lpm or 45 lpm) operation.

Specifications

Engine

• Briggs & Stratton, 18 hp
  V-Twin, air cooled
• Electric start
• Fuel capacity: 7 gal (26.5 liters)

Hydraulic System

• 8 gpm (30 liters/min) at 2,500 psi (172 bar)
  or 5 gpm (20 liters/min) at 2,500 psi (172 bar)
• Reservoir: 2.7 gal (11 liters)
• Relief valve setting: 2,100-2,300 psi (145-158 bar)

Dimensions

• Length: 33" (84 cm), Width: 21.5" (55 cm), Height: 29" (74 cm)

Weight

• 216 lbs (98 kg) without fluids

Datasheet (pdf)

Flow Adapter Valve

Enjoy the convenience and efficiency of powering your ICS hydraulic saw from skid steers, backhoes, and other common construction equipment. Available for both 8 gpm and 12 gpm (30 lpm and 45 lpm) saws

Total Slurry Solutions (TSS 15)
Hi-Lift Performance Vacuum Systems

The Total Slurry Solutions (TSS) Hi-Lift Performance vacuum systems provide an easy way to contain and dispose of the slurry produced when wet-sawing or drilling in concrete, masonry or stone materials.

TSS-15

• Polyethylene tank, won't dent or corrode, (actual fill capacity 15 gallons)

TSS 15/55

• Hi-Lift, 105 inches of water-lift, 112 cfm
• 2 hp bypass motor
• 110 v/60 Hz
• Float assembly with auto shut off

Click here to download datasheet

When water isnt readily available, this corrosion resistant poly tank provides the solution. Able to hold up to 25 gallons, this tank offers the required pressure and flow that ICS saws require. The diaphragm High-Flo pump provides 1.8 gpm at 60 psi and comes with molded alligator clips for 12v battery hookup. Comes with a whip fitted with a standard hose end, ready for any regular hose you desire.

Features:

• Capacity: 25 gal
• Pump Output: 1.8 GPM / 60 PSI
• Power Supply: 12 volt, gator clip hookup
• Tank Construction: Corrosion Resistant Poly