When you need more power to push through stiffer material, or you just need more volume, then look no further than the Step-Up 120 series of pumps. Inverter technology on the single phase and brute strength on the 3 phase units make these pumps ideal for larger jobs. Industrial duty motors are designed to run all day without stopping. The volume of material which can be applied in one day is outstanding.With the ability to handle aggregates up to 3/8 inch and 35 percent concentration, these pumps are extremely versa-tile. Pump or spray mortars, stuccos, grouts, restoration mortars, underlayment, fireproofing, waterproofings and many other materials.Newly added configurations help you to customize for any type of job. We can help you choose the right standard unit and parts needed to tackle any project
The IMER Step-Up 120 is a towable but very compact sized pump suited for very unique pumping situations and environments. These pumps are extremely versatile. Pump or spray mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofings along with many other materials
|Model||STEP-UP 120 1ph||STEP-UP 120 3ph|
|Motor power rate||3 hp||7.5 hp|
|Mixer power rate||2 hp||2 hp|
|Electric compressor||1 hp / 9 cfm||3 hp / 11 cfm|
|Max aggregate size||1/4 in||3/8 in|
|Maximum flow rate||1.5 cu yd||-|
|Maximum flow rate IM25L||-||2.75 cu yd|
|Maximum flow rate 60.12||-||6 cu yd|
|Maximum flow rate 2L6||-||2.35 cu yd|
|Horizontal pumping distance||200 ft||300 ft|
|Vertical pumping distance||100 ft||200 ft|
|Hopper capacity||4.25 cu ft||4.25 cu ft|
|Dimensions||33 W x 80 L x 38 H in||33 W x 80 L x 38 H in|
|Weight||616 lbs.||616 lbs|
|(The pumping distance will vary depending upon the type of material being used)|
The Step-Up's rotor/stator is turned by a 3 HP, 220 volt single phase motor using inverter technology. The inverter provides smooth and continuous power even when the electrical source is not ideal. The inverter also aides in starting and controlling the frequency at which the pump operates. This allows the RPM's to range between 30 and 100, enabling the Step-Up 120 to be used for numerous applications and materials.
The Step-Up 120 is designed to be an all in one unit with optimum mixer output delivering material into the hopper. It is easy to setup and easy to operate, and does not require special electrical connections or an electrician to hook it up. All the motors combined are just under six horsepower and can operate on 16 amps of 220 volt single phase power. Competitor's pumps with similar output require either three phase power or 72 amps of single phase.
Small, light, easy to own and operate and able to handle 3/8 inch aggregate, the Step-Up 120 is the number one solution for your pumping and spraying needs.