Technical Sales 1–800–458–3687

Powermatic Shapers

PM2700 Shaper TS29 Tilting / Sliding HD Shaper
PM2700 Shaper TS29 Tilting / Sliding HD Shaper

s-h alt

PM2700 POWERMATIC SHAPERS and Accessories
1280100C PM2700 Shaper, 3HP 1PH 230V, DRO, Casters
1280101C PM2700 Shaper, 5HP 1PH 230V, DRO, Casters
1280102C PM2700 Shaper, 5HP 3PH 230/460V, DRO, Casters
1791205 Spindle, 1 inch for PM2700 Shaper
1791207 Router Collet, 1/4 inch for PM2700 Shaper
1791208 Router Collet, 1/2 inch for PM2700 Shaper
TS29 POWERMATIC SHAPERS and Accessories
1791284 TS29 Shaper, 7.5HP 3PH 230/460V, Sliding Table
6293198 Spindle, 1 inch for 29 Shaper
6293199 Spindle, 1-1/4 inch for 29 Shaper

 

This new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.

Features:

  • Integrated caster system built into the cast iron base for instant shop mobility
  • Spindle height digital readout for making fine incremental adjustments on multiple passes
  • Heavy duty 30 x 40 inch precision ground tabletop for smooth stock feeding
  • Convenient quick lock belt tensioning for easy speed adjustment
  • Industrial fence system with fine adjust dials for more precise positioning
  • 5HP totally enclosed motor offers plenty of power
  • Two spindle speeds (reversible) for a variety of work
  • Superior clear cutter guard promotes safety, allows observation of the entire cut
  • Table predrilled and tapped for feeder mounting in two locations
  • Fence has dual featherboards for work holding
  • Dual 4" ports for attachment to dust collection system

Standard Equipment:

  • 3/4" and 1-1/4" interchangeable spindle collets
  • Spindle height digital readout
  • Featherboard hold downs
  • Deluxe miter gauge
  • Integrated caster system
SPECIFICATIONS
Stock No. 1280100C 1280101C 1280102C
Motor 3HP, 1Ph, 230V 5HP, 1Ph, 230V 5HP, 3Ph, 230V/460V, Prewired 230V
Spindle Speeds 7500 and 10,000 7500 and 10,000 7500 and 10,000
Reversible YES YES YES
Table Size (in) 40 x 30 40 x 30 40 x 30
Table Opening Dia. (in) 7-3/8 7-3/8 7-3/8
Table Insert Opening Dia. (in) 2-3/4 x 3-7/8 2-3/4 x 3-7/8 2-3/4 x 3-7/8
Fence Size (in) 4-7/8 x 18-3/4 4-7/8 x 18-3/4 4-7/8 x 18-3/4
Spindle Travel (in) 4 4 4
Spindle Sizes (in) 3/4,1-1/4 3/4,1-1/4 3/4,1-1/4
Under nut capacity {Spindle dia. - Capacity (in} 3/4-3-3/4 & 1-1/4-6 3/4-3-3/4 & 1-1/4-6 3/4-3-3/4 & 1-1/4-6
CFM minimum requirement 600 600 600
Overall Dimensions (L x W x H/in.) 40 x 37 x 45 40 x 37 x 45 40 x 37 x 45
Ship Weight (lbs) 690 690 690

 

TS29 Tilt/Slide Shaper
 

The new TS29 is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, easy, and accurate set-ups.

 

The full guard includes two stock hold downs and a see through cover that flip up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish.

 

An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble free performance. Powered by a big 71/2HP motor that drives the spindle forward and reverse with five speeds.

 

The massive sliding table is fully supported by six tapered precision bearings through a full four foot stroke. In addition, on board the table is a large miter head complete with stock hold down clamp and a 56-inch miter fence with flip stop.

 

The large table can easily accommodate a stock feeder for longer production runs; this machine is built to handle any job

FEATURE

  • Sliding table with miter head, hold down and fence
  • Fully adjustable fence with dual digital readout
  • Large table with built-in slider with room for stock feeder
  • 7-inch vertical spindle travel
  • Spindle tilts neg. 5 to pos. 45 degrees
  • Large diameter multiple table inserts
  • Five spindle speeds in forward and reverse with lighted indicator

BENEFIT

  • Can accommodate everything from multiple end cuts to tenons
  • Fast and accurate set-up and repeatability
  • Supports large work pieces; added safety option with feeder
  • Allows user to stack tooling
  • Increased versatility with tooling
  • Accommodate virtually any size cutter
  • The correct speed for any job

Specifications

Model Number TS29
Stock Number 1791284
Motor HP/Voltage/Phase 7 1/2HP, 230/460V 3Ph
Electric Controls 24V magnetic
Spindle Sizes w/Capacity Under Nut 1 1/4" dia. x 6 1/4', 1" dia. x 6", 3/4 dia. x 3 1/2", 1/4", 1/2" collets
Spindle Travel 7" vertical
Spindle Speeds (rpm) 3000, 4000, 6000, 8000, 10,000
Tilting Spindle 5° back, 45° forward
Overall Tale Size (l x w x H) 51 1/2 x 33 1/2
Max. Diam. Cutter Below Table 9"
Max. Diam. Cutter Above Table 12"
Fence Size (w/Dual Digital Readouts) 46" x 5"
Fence Travel (major & minor) 5 3/8"/3 5/8"
Slide Table Size 11 1/4" x 51 1/4"
Table Travel 49 1/4"
Table Inserts One tilting, one straight
Min. CFM Required 800
Shipping Weight 1280lbs
Net Weight 1100lbs
Overall Dim. 51"l x 44"w x 53"h
Tools Supplied Spindle wrenches, spanner wrench, set of open end wrenches, set of allen wrenches, grease gun, tool box

 

s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

PM9-1280100C
PM2700 SHAPER, 3HP 1PH 230V, DRO, CASTERS, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 690 LBS
Mfg. item #: PM9-1280100C
WMH1280100C
lease to own for as little as:$92 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$4,599.99

1
PM9-1280101C
PM2700 SHAPER, 5HP 1PH 230V, DRO, CASTERS, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 769 LBS
Mfg. item #: PM9-1280101C
WMH1280101C
lease to own for as little as:$98 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$4,899.99

1
PM9-1280102C
PM2700 SHAPER, 5HP 3PH 230/460V, DRO, CASTERS, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 690 LBS
Mfg. item #: PM9-1280102C
WMH1280102C
lease to own for as little as:$98 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$4,899.99

1
PM9-1791205
1 SPINDLE FOR PM2700 SHAPER , MADE IN TAIWAN, SHIPS VIA UPS/FEDEX PACKAGE & WEIGHT = 6 LBS
Mfg. item #: PM9-1791205
WMH1791205
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment1019
$219.99

1
PM9-1791207
1/4 ROUTER COLLET FOR PM2700 SHAPER , MADE IN TAIWAN, SHIPS VIA UPS/FEDEX PACKAGE & WEIGHT = 6 LBS
Mfg. item #: PM9-1791207
WMH1791207
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment1019
$154.03

1
PM9-1791208
1/2 ROUTER COLLET FOR PM2700 SHAPER , MADE IN TAIWAN, SHIPS VIA UPS/FEDEX PACKAGE & WEIGHT = 6 LBS
Mfg. item #: PM9-1791208
WMH1791208
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment1019
$154.03

1
PM9-1791284
TS29 SHAPER, 7.5HP 3PH 230/460V, SLIDING TABLE , MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 1280 LBS
CALL 800-458-3687 X1 FOR OUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, DOING BUSINESS SINCE 1926!
Mfg. item #: PM9-1791284
WMH1791284
lease to own for as little as:$235 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$12,499.99

1
6293198
^^ 1 SPINDLE FOR 29 SHAPER - TAWAI
Mfg. item #: 6293198
WMH6293198
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

692
6293199
^^ 1-1/4 SPINDLE FOR 29 SHAPER - T
Mfg. item #: 6293199
WMH6293199
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

692
Copyright © 2024 Smith-Hamilton, Inc
0.008 240215 11:05