The PM3000 brings heavyweight performance and patented innovations to the 14-inch table saw arena. The riving knife rises and lowers with the blade, substantially reducing kickback risk; and both riving knife and blade guard each have a quick-release, so mounting and removing them is fast and tool-free. A wide-stance trunnion and concave teeth on the trunnion gears promote smooth blade raising/tilting. The Poly-V drive belt system results in quieter, more efficient power transfer with virtually no vibration and less heat build-up. A push-button arbor lock is accessible from above the table top and eliminates the need for dual arbor wrenches. Easy-access controls include jumbo stop switch. Sloped cabinet floor and built-in port for dust extraction. Comes standard with a 33 inch DuramineTM surfaced extension table and legs.
Standard Equipment:
Specifications | |
---|---|
Blade Diameter | 14 inch |
Arbor Diameter | 1 inch |
Arbor Speed | 3450 RPM |
Maximum Depth of Cut | 5 1/8 inch |
Maximum Depth of Cut at 45 Degrees | 3-1/2 inch |
Maximum Rip Right of Blade | 50 inch |
Maximum Rip Left of Blade | 14 inch |
Table in Front of Saw Blade at Maximum Depth of Cut | 15-1/2 inch |
Maximum Width of Dado | 13/16 inch |
Maximum Diameter of Dado | 8 inch |
Table Type | Polished cast iron |
Table Height | 35 inch |
Table Size with Standard Extension (L x W) | 38 x 48 inch |
Table Size without Extension (L x W) | 38 x 26 inch |
Rapid Wing Extension | n.a. |
Table Size without Wings (L x W) | 38 x 26 inch |
Dust Port Outside Diameter | 4 inch |
Dust Collection Minimum CFM Required | 350 cu.ft/min |
Dust Collection Adapter Port | n.a. |
Leg Stand with Steel Storage | n.a. |
Miter Gauge Type | Deluxe, micro adjustable with Aluminum fence |
Motor Power | 7-1/2 HP |
Motor Voltage | 230 / 460 V |
Prewired Voltage | 230 V |
Wiring Remarks | 460 V requires optional 460 V mag switch |
Motor Phase | 3 Ph |
Model Number | PM3000 |
Brand | Powermatic |
Overall Dimensions | 84 x 53 x 42 |
Height | 42 inch |
Width | 53 inch |
Length | 84 inch |
Net Weight | 750 pound |
Powermatic PMST-48 Sliding Table Attachment
Maximize your table saws potential with the new Powermatic Sliding Table Saw attachment. This large sliding table bolts to the table saw and enables smooth and precise cuts on large sheets and stock. With its precision bearing track system, the Powermatic Sliding table saw attachment allows for ultimate support and controlled sliding operation while performing straight or angled cuts. The new Powermatic Sliding Table Saw is engineered to ensure precision while maximizing efficiency and performance.
Features:
![]() |
WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. |
POWERMATIC 14 inch TABLESAWS and Accessories | |
---|---|
PM375350K | PM3000, 14" Tablesaw, 7.5HP 3PH 230/460V, 50" Accu-Fence |
1791081 | Dado Insert for PM3000, PM3000 |
1791081B | Dado Insert for PM3000B, PM3000B |
2195080 | Accu-Fence Assembly for PM3000 |
2195080B | Accu-Fence Assembly for PM3000B |
6827046 | Wood Extension Table, 33" x 38" for PM3000 |
COMPARE PERFORMANCE and PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of
pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….
The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.
The Professional Model features the ruggedness and durability for Commercial production requirement, yet is extremely refined for the serious woodworkers needs and wants. With larger components and greater rigidity, the Professional Model is designed for 10 - 12 inch Saws cutting heavier materials and commercial use. The Vega retrofit Saw Fence System is available with 26, 40 or 50 inch rip capacity to the right of the blade and 10″ to the left, with a standard fence length of 42 inch on models PRO 26, PRO 40, and PRO 50. For saw tables between 34 and 42 inches deep, the PRO 26L, PRO 40L, AND PRO 50L ARE available featuring a 50 inch fence bar.
Designed for contractors saws, smaller cabinet saws, and 10 inch saws that don’t receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Util- ity Fence will upgrade your saw to a very precise cutting machine at a very rea- sonable price.
The Utility Model Vega Saw Fence System is available with 26 or 50 inch rip capacity to the right of the blade and 8 inch to the left.
Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.
You compare the features!
No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) “I found the Vega Model 50 the easiest to install of all the fences.”
Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66, most Sears 10 inch saws and most other saws having fence rail mounting holes 8 -9 inch on either side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.) Features which help make this Fence so easy to install include:
Extruded from 6005 - T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fit and nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for low friction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.
The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, this is a necessary feature. The Micro Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod thumb nut combination. For the final adjustment of only a few thousandths of an inch, Vega provides a threaded mechanism for final, precise setting.
To operate the Micro Adjust:
… and hoping for the best! With other saw fences precise adjustments is achieved using this technique.
Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, the highest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.
A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extension
plates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.
B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2 inch square tube predrilled for mounting to the exist- ing holes (in most saws)
and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, high durability, and an attractive finish.
C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatness
held to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which provides
extreme surface hardness and low friction.
D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for the
front guide rail and simply bolt to the saw table through existing holes (in most saws).
E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance
easy.
F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guide
rail.
Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Rails
to support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.
Model | Rip Capacity Right | Rip Capacity Left | Fence Bar Length | Front Rail Dia. |
---|---|---|---|---|
Vega Utility 26 | 26 | 8 | 36 inch | 1-3/4 inch |
Vega Utility 50 | 50 | 8 | 36 inch | 1-3/4 inch |
Vega Pro 40 | 40 | 10 | 42 inch | 2 inch |
Vega Pro 50 | 50 | 10 | 42 inch | 2 inch |
Vega Pro 40L | 40 | 10 | 50 inch | 2 inch |
Vega Pro 50L | 50 | 10 | 50 inch | 2 inch |
Models | |
---|---|
72024 | Utility Saw Fence 26 inch Rip Capacity 36 inch Fence Bar Still MADE in the USA |
72025 | Utility Saw Fence 50 inch Rip Capacity 36 inch Fence Bar Still MADE in the USA |
72578 | Pro 40 inch Rip Capacity 42 inch Fence Bar Still MADE in the USA |
72580 | Pro 50 inch Rip Capacity 42 inch Fence Bar Still MADE in the USA |
72579 | Pro 40L inch Rip Capacity 50 inch Fence Bar Still MADE in the USA |
72581 | Pro 50L inch Rip Capacity 50 inch Fence Bar Still MADE in the USA |
CALL 800-458-3687 FOR OUR EXCLUSIVE BROTHER-IN-LAW SPECIAL ON THIS ITEM
** SHIPS FROM OUR STORE IN MIAMI, FL
** SHIPS FROM OUR STORE IN MIAMI, FL