Roll-In Saw Model DT1340 Deep Throat Journeyman Vertical Band Saw

SPECIFICATIONS
Clearance	13" Table to guide
Throat	40"
Blade Size	3/8" Width x 15' 3" Length 10/14 Variable tooth 0.035 Thick (bi-metal)
Blade Guards	Covers 4 step pulleys and blade
Guide Rollers for Blade Width	"Adjusto-BlokÃÂ®" for 1/4" to 3/4" blade widths
Blade Speeds	70 to 500 sfpm digital speeds control with readout*
Table	24 1/4" x 50 1/4" Precision ground steel
Table Height	39" from floor
Wheels	Aluminum wheels with polyurethane molded surface and cast iron idler wheel
Motor	2HP, 220/440V, three-phase
Dimensions	76" Width x 80" Height x 30" Length
Shipping Weight	1,050 lbs. F.O.B. Cleveland Ohio

Models and Accessories
DT1340	13 X 40 inch VERTICAL BANDSAW 220V, 3 PHASE
DT1340A	13 X 40 inch VERTICAL BANDSAW 440V, 3 PHASE
901	5 Foot Conveyor Min 26.75 inch to Max 36.75 inch Height - Compatible Roll-In Saws EF1459, HM1212, HW1212, HS1418, JE1320, JM1220, DT1340 Capacity of 1300 LBS
902	10 Foot Conveyor Min 26.75 inch to Max 36.75 inch Height - Compatible Roll-In Saws EF1459, HM1212, HW1212, HS1418, JE1320, JM1220, DT1340 Capacity of 1301 LBS
903	5 Foot Conveyor Min 29 inch to Max 40 inch Height - Compatible Roll-In Saws TF1420 Capacity of 1302 LBS
904	10 Foot Conveyor Min 29 inch to Max 40 inch Height - Compatible Roll-In Saws TF1420 Capacity of 1303 LBS
1A95R	CHIP DUST BLOWER
174	FACTORY INSTALLED WORK LIGHT
179	1 inch GUIDE ROLLERS - FOR 1" WIDTH BLADE
1A132	CASTER SET - 4 PCS.
1A49	CONTOUR GUIDE ASSEMBLY
1A192	SAW MASTER ACCESSORY PKG.
6000	1 inch WELDER, GRINDER and SHEAR 220V. 3PH

Roller Conveyor 5ft or 10ft

Summary: Coming in 5ft and 10ft lengths, the Roll-In Saw conveyor systems allow you to load long and heavy pieces of materials into any of our saws.

Compatible Saws: EF1459, JE1320, JM1220, DT1340, HM1212, HW1212, HS1418

ROLL-IN SAW DT1340
Deep Throat Vertical Band Saw
Replacement Parts List

Effective Feb 13, 2019

Please Give Machine Serial Number With Order
Minimum Charge $20.00 Handling Charge $20.00

Call 216-459-9001 for Parts

PART NO.	DESCRIPTION
2A08U	UPPER WHEEL- complete with axle, bearings, snap rings and stud
2A08L	LOWER WHEEL
750	IDLER WHEEL - 12" O.D.
1167	IDLER WHEEL SHAFT
167	WHEEL BEARING - (4 required per saw) ea.
223-A	WHEEL AXLE, for lower wheel-(also serves as gearbox shaft)
282	WHEEL AXLE, for upper wheel
2A175	GEARBOX - complete
2A13	GUIDE ASSEMBLY - complete upper and lower, includes 2 housings, 4 guide blocks, 2 bearings
221	GUIDE BEARINGS - (2 required per saw) ea.
261	GUIDE BLOCKS - (4 required per saw) ea.
1131	V-BELT - 33" O.D.
234	3-1/2" PULLEY, 1 step X 3/4" bore for gearbox
269	1-3/4" PULLEY, 1 step X 5/8" bore for motor
249	SHORT BLADE GUARD
253	MOTOR, 2HP, 60 Cycle, three-phase, 220V/440V
263	MAGNETIC STARTER 3PH, 220V
264	MAGNETIC STARTER 3PH, 440V
174	WORK LIGHT - complete
1A95J	CHIP DUST BLOWER
755	BLADE, 1/4" x 10/14T x 15' 3" variable tooth (bi-metal)
756	BLADE, 3/8" x 10/14T x 15' 3" variable tooth (bi-metal)
757	BLADE, 1/2" x 10/14T x 15' 3" variable tooth (bi-metal)