Technical Sales 1–800–458–3687

Roll-In Saw EF1459 Bandsaw

 

EXCLUSIVE FROM SOUTHERN TOOL
FREE EXTRA BI-METAL BANDSAW BLADE OF YOUR CHOICE WITH PURCHASE OF SAW

 

 

s-h alt

s-h alt

Shown with C-Clamp vise - included with the saw

Optional item  1A192

 

EF1459 - The Original

The Original was the first saw in America to use a patented gravity-feed system that saves time and energy. The success of this product is the bedrock for the reputation Roll-In Saw has earned for manufacturing versatile and durable saws.

​The EF1459 is actually a horizontal band saw on a vertical frame. An all-purpose band saw, it handles all metals, plastics, and woods in a wide variety of cuts. It is a fast, accurate cut-off machine that is perfect for notching, slitting, and slotting. A reliable addition to your shop floor or tool room, this band saw doubles as a contour, profile, and rip saw.

Features:

  • The first saw in America to use a patented gravity-feed system providing users an efficient feed rate
  • Fast and accurate all-purpose saw--easily cutting all metals, plastics, and woods ​
  • Horizontal band saw on a vertical frame gives users the versatility of both saw styles
  • Precision for complex cuts
  • Auto-feed for high volume cutting
Specifications
Feed System Gravity Feed
Blade Travel 9 inch into work
Cutting Capacity at 90° Round: 8.5 inch Rectangle: 14.5 inch x 8.5 inch
Miter Cut Angle Range 0 - 45 degrees (material can rotate 45 degrees in clamp)
Bevel Cut Angle Range N/A
Capacity Under Guides 14-1/2 inch
Throat 8-3/4 inch
Blade Size (Ships With Saw) 3/4 inch Width x 8/12T x 10' Length .035 thick (bi-metal)
Blade Size (Accepted Widths) 1/4, 3/8, 1/2, 5/8 and 3/4 inch
Blade Speeds 70, 140, 270 and 525 fpm
Table Precision Ground Cast Iron Table: 18-1/2 x 30 inch
Table Height 30" From Floor (No Casters)
Motor 1 HP, 110/220V, 60-cycle single-phase; 1 HP 220/440V, 60-cycle three-phase
Dimensions 48" x 33" x 72" 
Shipping Weight 700  lbs. F.O.B Cleveland, Ohio

 

Models and Accessories
EF1459 14-1/2 inch VERTICAL BANDSAW / 110 V, 1 PHASE
EF1459A 14-1/2 inch VERTICAL BANDSAW 220V, 1 PHASE
EF1459B 14-1/2 inch VERTICAL BANDSAW 220V, 3 PHASE
EF1459C 14-1/2 inch VERTICAL BANDSAW 440V, 3 PHASE
901 5 Foot Conveyor Min 26.75 inch to Max 36.75 inch Height - Compatible Roll-In Saws EF1459, HM1212, HW1212, HS1418, JE1320, JM1220, DT1340 Capacity of 1300 LBS
902 10 Foot Conveyor Min 26.75 inch to Max 36.75 inch Height - Compatible Roll-In Saws EF1459, HM1212, HW1212, HS1418, JE1320, JM1220, DT1340 Capacity of 1301 LBS
903 5 Foot Conveyor Min 29 inch to Max 40 inch Height - Compatible Roll-In Saws TF1420 Capacity of 1302 LBS
904 10 Foot Conveyor Min 29 inch to Max 40 inch Height - Compatible Roll-In Saws TF1420 Capacity of 1303 LBS
1A192 Accessorie Kit Includes rip fence with rail quick clamp with back plate and table plate
1A95R CHIP DUST BLOWER
174 FACTORY INSTALLED WORK LIGHT
179 1 inch GUIDE ROLLERS - FOR 1" WIDTH BLADE
1A132 CASTER SET - 4 PCS.
1A49 CONTOUR GUIDE ASSEMBLY
1A192 SAW MASTER ACCESSORY PKG.

ROLL-IN SAW EF1459 & SF8590
Vertical All-Purpose Band Saw
Replacement Parts List

Effective Feb 13, 2019

Please Give Machine Serial Number With Order
Minimum Charge $20.00      Handling Charge $20.00

Call 216-459-9001 for Parts 

Part Description   Part Number
ANGLE PLATE, graduated block   1A41
BEARING, for upper and lower wheels (2 required per wheel) ea. ~Part of 1A37 Assembly~ 167
BLADE GUARD   1A142
BLADE, 3/4" x 10T x 10', for EF1459 Model   1X54
BLADE, 3/4" x 10T x 9', for SF8590 Model   154
BLADE, 3/4" x 8/12T x 10', for EF1459 Model (bi-metal)   1X57
C-CLAMP with rod, for angle plate   1A42
CASTERS - (set of 4; 2w/locks)   1A132
CHIP DUST BLOWER   1A95R
CONTOUR GUIDE ASSEMBLY - complete   1A49
CONTOUR GUIDE ASSEMBLY - complete for 3/4" blades   1A160
CONTOUR GUIDE INSERTS, for 1/4" blades pr. ~Part of 1A49 Assembly~ 1258
CONTOUR GUIDE INSERTS, for 3/4" blades pr. ~Part of 1A60 Assembly~ 1256
CONTOUR GUIDE INSERTS, for 3/8" & 1/2" blades pr. ~Part of 1A49 Assembly~ 1257
COUNTERWEIGHT ASSEMBLY   1A33
FLAT TRACK ROLLER, with stud   1A150
GEARBOX - complete (includes 24 tooth outside gear)   6A56
GROOVED TRACK ROLLER, with bearing and counterweight stud   1A152
GROOVED TRACK ROLLER, with bearing and hex head stud   1A151
GUIDE ASSEMBLY - complete upper and lower, includes housing, stem, 4 rollers, and 4 bearings   1A48
GUIDE ROLLER (1") - for 1" maximum blade width (4 required per saw) ea. ~Part of 1A48 Assembly~ 179
GUIDE ROLLER (3/4") - for 3/4" maximum blade width (4 required per saw) ea. ~Part of 1A48 Assembly~ 175
GUIDE ROLLER BEARING - (4 required per saw) ea. ~Part of 1A48 Assembly~ 169
HYDRAULIC CYLINDER   1134
LOWER WHEEL - complete with axle, bearings and rubber tire, less 80 tooth spur gear   1A37
MAGNETIC STARTER, single-phase 110V    172
MAGNETIC STARTER, single-phase 220V   172-A
MAGNETIC STARTER, three-phase 220V    173
MAGNETIC STARTER, three-phase 440V   173-A
MOTOR, 1 HP, 60 cycle, single-phase 110V/220V   170
MOTOR, 1 HP, 60 cycle, three-phase 220V/440V   171
PULLEY GUARD   1125
PULLEY, 2-3-4-5" step x 3/4" bore for gearbox   1128
PULLEY, 2-3-4-5" step x 5/8" bore for motor   1126
QUICK CLAMP with BACK PLATES and table plate   1A189
RIP FENCE with RAIL   1A185
RUBBER TIRE, for upper and lower wheels (2 required per saw) ea. ~Part of 1A37 Assembly~ 1133
SIDE PANELS-(pair)   1135
SPUR GEAR (24 Tooth), for outer gearbox; short shaft     163
SPUR GEAR (80 Tooth), for lower wheel   162
STOP CLAMP, to control depth of cuts   1A40
TABLE, 18 X 30 Blanchard ground   132
TENSION ADJUSTMENT HANDLE   1A164
UPPER WHEEL - complete with axle, bearings and rubber tire   1A36
V-BELT- 33" O.D.   1131
WORK LIGHT, - complete   174

 

Roller Conveyor 5ft or 10ft

Summary: Coming in 5ft and 10ft lengths, the Roll-In Saw conveyor systems allow you to load long and heavy pieces of materials into any of our saws.

Compatible Saws: EF1459, JE1320, JM1220, DT1340, HM1212, HW1212, HS1418

EF1459
LIMITED QUANTITY 14-1/2 VERTICAL BANDSAW / 110 V, 1 PHASE
LIMITED QUANTITY AVAILABLE AT THIS PRICE & YES, STILL PROUDLY MADE IN THE USA
Mfg. item #: EF1459
RISEF1459
lease to own for as little as:$133 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$6,650.00

6   1
EF1459A
14-1/2 VERTICAL BANDSAW 220V, 1 PHASE
STILL PROUDLY MADE IN THE USA
Mfg. item #: EF1459A
RISEF1459A
lease to own for as little as:$134 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,719.83

6
EF1459B
14-1/2 VERTICAL BANDSAW 220V, 3 PHASE
STILL PROUDLY MADE IN THE USA
Mfg. item #: EF1459B
RISEF1459B
lease to own for as little as:$134 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,719.83

6
EF1459C
14-1/2 VERTICAL BANDSAW 440V, 3 PHASE
STILL PROUDLY MADE IN THE USA
Mfg. item #: EF1459C
RISEF1459C
lease to own for as little as:$134 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,719.83

6
901
5 FT ROLLER CONVEYOR
Mfg. item #: 901
RIS901
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$639.00

6
902
10 FT ROLLER CONVEYOR
Mfg. item #: 902
RIS902
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$944.00

6
903
5 FT ROLLER CONVEYOR - TF
Mfg. item #: 903
RIS903
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$689.00

6
904
10 FT ROLLER CONVEYOR - TF
Mfg. item #: 904
RIS904
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

6
1A192
SAW MASTER ACCESSORY PACKAGE
Mfg. item #: 1A192
RIS1A192
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$582.00

6
1A95R
CHIP DUST BLOWER
Mfg. item #: 1A95R
RIS1A95R
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$120.00

6
174
WORK LIGHT
Mfg. item #: 174
RIS174
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$142.00

6
179
1 BLADE GUIDE ROLLER
Mfg. item #: 179
RIS179
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$39.00

6
1A132
CASTERS
Mfg. item #: 1A132
RIS1A132
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$154.00

6
1A49
CONTOUR GUIDE ASSEMBLY
Mfg. item #: 1A49
RIS1A49
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$216.00

6
Copyright © 2024 Smith-Hamilton, Inc
0.012 230321 09:23