Call 1–800–458–3687 or  Email us!

Roll-In Saw JM1220 Journeyman Vertical T

EXCLUSIVE FROM SOUTHERN TOOL
FREE EXTRA BI-METAL BANDSAW BLADE OF YOUR CHOICE WITH PURCHASE OF SAW

Roll-In Saw Journeyman JM1220 Vertical Tool and Die Bandsaw

From the digital speed control with readout to the calibrated tilt-table, the Journeyman Vertical JM1220 Tool and Die bandsaw from Roll-in Saw sets the standard for versatility.  To increase operator efficiency, the tilt-table moves 11" front to back by counterweight pressure controlled with a foot pedal and lock.

The variable speed control, tilt-table Adjusto-Blok blade guides, safety shield, chip-clearing funnel, chip blower, angle plate and blades all add up to high performance when making contour and profile cuts, rip cuts, and the most complex angle cuts.

Pressure for the table feed is supplied by two counterweights.  One is adjustable, supplying fifteen pounds to sixty pounds of cutting pressure.  Gravity supplies the power.  The hydraulic regulator system further assures accurate chatter-free cutting speeds. 

The standard tilting table combined with power feed makes compound angle cuts practical.  This is a perfect precision-cutting machine for tool and die, R&D, and model shops.

Special Features

  • Table traverses: 11" front to back by counterweight pressure, controlled by foot pedal and lock
  • Compressed air chip blower
SPECIFICATIONS
Capacity Under Guides 12 ½" Maximum, table-to-guide
Throat 20"
Frame Welded steel
Blade Size 3/4"Width x 12' 10"Length .035 Thick (bi-metal)
Blade Guard Blade
Blade Guides "Adjusto-Blok®" blade guides for 1/4" to 3/4" blade widths, safety shield
Blade speeds 70 to 500 sfpm digital speed control with readout*
Table 24 ¼" x 24¼" Cast iron precision ground, 45° right, 10° left, 1° calibration marks
Feed systems Gravity feed
Wheels Aluminum 20 1/4" x 24 1/4"
with polyurethane molded surface
Motor 2HP, 220/440V, 60-cycle, three-phase
Dimensions 46" Width x 80" Height x 30" Length
Shipping Weight 1,000 lbs. F.O.B. Cleveland Ohio
Models and Accessories
JM1220 20 inch VERTICAL BANDSAW 220V, 3 PHASE
JM1220A 20 inch VERTICAL BANDSAW 440, 3 PHASE
901 5 Foot Conveyor Min 26.75 inch to Max 36.75 inch Height - Compatible Roll-In Saws EF1459, HM1212, HW1212, HS1418, JE1320, JM1220, DT1340 Capacity of 1300 LBS
902 10 Foot Conveyor Min 26.75 inch to Max 36.75 inch Height - Compatible Roll-In Saws EF1459, HM1212, HW1212, HS1418, JE1320, JM1220, DT1340 Capacity of 1301 LBS
903 5 Foot Conveyor Min 29 inch to Max 40 inch Height - Compatible Roll-In Saws TF1420 Capacity of 1302 LBS
904 10 Foot Conveyor Min 29 inch to Max 40 inch Height - Compatible Roll-In Saws TF1420 Capacity of 1303 LBS
174 FACTORY INSTALLED WORK LIGHT
6000 1 inch WELDER, GRINDER and SHEAR 220V. 3PH



 

Roller Conveyor 5ft or 10ft

Summary: Coming in 5ft and 10ft lengths, the Roll-In Saw conveyor systems allow you to load long and heavy pieces of materials into any of our saws.

Compatible Saws: EF1459, JE1320, JM1220, DT1340, HM1212, HW1212, HS1418

ROLL-IN SAW JE1320 & JM1220
Vertical Band Saw
Replacement Parts List

Effective Feb 13, 2019

Please Give Machine Serial Number With Order
Minimum Charge $20.00      Handling Charge $20.00

Call 216-459-9001 for Parts

PART NO. DESCRIPTION
2A08U UPPER WHEEL- complete with axle, bearings, snap rings and stud
2A08L LOWER WHEEL
167 WHEEL BEARING - for upper wheel (2 required) ea.
223-A WHEEL AXLE, for lower wheel-(also serves as gearbox shaft)
282 UPPER WHEEL AXLE
2A175 GEARBOX - complete
2A13 GUIDE ASSEMBLY - complete upper and lower, includes 2 housings, 4 guide blocks, 2 bearings
221 GUIDE BEARINGS - (2 required per saw) ea.
261 GUIDE BLOCKS - (4 required per saw) ea.
1131 V-BELT - 33" O.D.
234 3-1/2" PULLEY, 1 step X 3/4" bore for gearbox
269 1-3/4" PULLEY, 1 step X 5/8" bore for motor
1A41 ANGLE PLATE, graduated work block
203 TABLE
248 LONG BLADE GUARD
249 SHORT BLADE GUARD
253 MOTOR, 2HP, 60 Cycle, three-phase, 220V/440V
263 MAGNETIC STARTER 3PH, 220V
264 MAGNETIC STARTER 3PH, 440V
174 WORK LIGHT with shade 
1A95J CHIP DUST BLOWER
1134 HYDRAULIC CYLINDER
2114 BLADE, 3/4" x 10T X 12'-10" (carbon)
2115 BLADE, 3/4" X 10T x 12'-10" (bi-metal)

 

JM1220
20 VERTICAL BANDSAW 220V, 3 PHASE
STILL PROUDLY MADE IN THE USA
Mfg. item #: JM1220
RISJM1220
lease to own for as little as:$243 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,150.86

224
JM1220A
20 VERTICAL BANDSAW 440, 3 PHASE
STILL PROUDLY MADE IN THE USA
Mfg. item #: JM1220A
RISJM1220A
lease to own for as little as:$243 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,150.86

224
901
5 FT ROLLER CONVEYOR
Mfg. item #: 901
RIS901
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$639.00

224
902
10 FT ROLLER CONVEYOR
Mfg. item #: 902
RIS902
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$944.00

224
903
5 FT ROLLER CONVEYOR - TF
Mfg. item #: 903
RIS903
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$689.00

224
904
10 FT ROLLER CONVEYOR - TF
Mfg. item #: 904
RIS904
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

224
174
WORK LIGHT
Mfg. item #: 174
RIS174
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$142.00

224
6000
BANDSAW BLADE WELDER, GRINDER & SHEAR (FACTORY INSTALLED)
Mfg. item #: 6000
RIS6000
lease to own for as little as:$86 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$4,295.00

224
Copyright © 2024 Smith-Hamilton, Inc
0.008 230321 10:03