chat now with southern tool
Technical Sales 1–800–458–3687

TrunkPump TP-3PT Dewatering Pump

Stop dragging around loading and unloading your inefficient gasoline powered trash and water pumps! TrunkPumps mount to most Category 1 three point hitch tractors and are efficiently powered by the PTO, turning your pumping requirements into an easy one-person job. TrunkPump saves time, money, labor and fatigue while improving safety, energy efficiency and maintenance upkeep.

TrunkPumps dewatering, transfer, trash and pressure pumps handle a wide variety of applications typical in construction, agriculture, grounds and turf management, golf course maintenance, highway and road building and municipal maintenance and safety.

TRUNKPUMP

A TrunkPump for Every Job

TrunkPumps come in a range of sizes with 2, 3 and 4 inch inlets with flow rates from 140 to over 500 gallons per minute and head pressure ranges from 80 to over 200 feet. We have a special model designed to work with the popular Ventrac/Steiner tractors.
 

The Proof is in the Pump

Our Guarantee is simple. If you don't love your TrunkPump, return it. No questions asked. And because you don't know when it's going to rain, and neither do we, keep the TrunkPump until you have a chance to use it is up to one year. Do not wait do it today!

TP-3PT: 3" Self-Priming Reinforced Polyester Dewatering Pump

Use for a wide range of water/liquid transfer/evacuation applications where volume is important; easy and economical to maintain.Pump: 3" self-priming reinforced polyester centrifugal pump with EPDM rubber coated volute and seals, plastic impeller and stainless steel internal hardware.
Pulleys: Cast Iron
Frame: TGIC Powder Coated Steel
Dimensions: 32" L x 26" W x 37" H
Weight: 200 lbs.
Performance: 440gpm, up to 52psi

FAQ - Frequently Asked Questions

Why should I choose TrunkPump?

Low maintenance and ease of use are the main reasons. If you do not like maintaining a gas-powered pump and are tired of lugging one around, TrunkPump might be the right choice for you.

So, it just hooks up to my tractor?

Yes, it attaches to your Category 1 three-point hitch and is powered by the Power Take Off (PTO).

What about horsepower requirements?

Our largest pump (4 inch requires 15hp, the others only 8hp. Most compact tractors have more than enough power to run a TrunkPump.

Sounds pretty simple, how does it work?

It is simple, by design. TrunkPump takes the power from your tractor, reverses the rotation and increases rpms from 540rpm up to 3500rpm to power the pump. All this is done on a sturdy platform for easy and safe transport.

What is this I hear about a hydraulic version?

After years of requests we now offer a hydraulically driven model that is powered by the remote hydraulics from a variety of compact equipment ÂÄÂùfrom a Bobcat down to the Dingo that ate my baby.

Are there any special requirements for the hydraulic model?

The hydraulic model requires 9gpm of hydraulic flow at 1250psi.

What if I have got less or more flow than that?

If you have got less flow the pump will run at low speed and not work properly. If you have more flow our priority flow manifold sends a priority flow of 9gpm/1250psi to the pump and the excess returns to your hydraulic source.

I have got some more questions, what should I do?

Please contact us! Email sales@southern-tool.com call our toll-free number at 800-458-3687

HOSE PACKAGES

Complete the TrunkPump with reinforced PVC suction hoses and PVC lay-flat discharge hoses. Custom lengths available upon request.
HP-3PT: 3" x 7' "Trunk" Suction Hose, 3" x 25' Discharge Hose, CS-3 Strainer w/ Elbow
HP-3LG: 3" x 20' Suction Hose, 3" x 25' Discharge Hose, CS-3 Strainer w/ Elbow

CUSTOM STRAINERS

TrunkPump Accessories Keep out unwanted trash and pump in shallow water to 1/2" with our custom Deep Draw Strainer or pump in shallow water to 1/4” (basements, precious turf) with our Top-Hole Strainer.

CS-3: 3" Shallow Water Strainer 1/2" Depth w/ 90° Elbow
SS-3: 3" Top-Hole Strainer 1/4" Depth w/ 90° Elbow

NOZZLE PACKAGES

Connect to discharge hose for pressure applications such as washing equipment, fire fighting, irrigation, etc.
NP-3: for 3" pumps, reduced to adj. flow nozzle (1-1/2")

FUEL SAVINGS KIT

The Fuel Savings Kit modifies 3-Point models to pump at full capacity with throttle at 60% to conserve fuel.
FSK-1: Fuel Savings Conversion Kit

TP-3PT
TP-3PT 3 HIGH VOLUME DEWATERING PUMP - 420+GPM, UP TO 52 PSI - SELF-PRIMING PTO POWERED PUMPS (FOR CAT. 1 TRACTORS 540 RPM) ** ALL 3PT. MODELS INCLUDE TRACTOR MOUNTING HARDWARE AND PTO SHAFT
Mfg. item #: TP-3PT
TRKTP-3PT
lease to own for as little as:$79 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$3,947.23

1286
HP-3PT
3 X 7 TRUNK SUCTION HOSE, 3X 25 BLUE DISCHARGE HOSE, CS-3 STRAINER W/ ELBOW - BLUE DISCHARGE HOSE RECOMMENDED FOR DEWATERING. RED DISCHARGE HOSE IS RATED UP TO 150 PSI
Mfg. item #: HP-3PT
TRKHP-3PT
FREE shipping when ordered with a machine from this manufacturer.20
$279.00

1286
HP-3LG
3 X 20 SUCTION HOSE, 3X 25 BLUE DISCHARGE, CS-3 STRAINER W/ ELBOW - BLUE DISCHARGE HOSE RECOMMENDED FOR DEWATERING. RED DISCHARGE HOSE IS RATED UP TO 150 PSI
Mfg. item #: HP-3LG
TRKHP-3LG
FREE shipping when ordered with a machine from this manufacturer.20
$349.00

1286
CS-3
3 SHALLOW WATER STRAINER 1/2 DEPTH W/ 90 DEG ELBOW
Mfg. item #: CS-3
TRKCS-3
FREE shipping when ordered with a machine from this manufacturer.20
$59.00

1286
SS-3
3 TOP-HOLE STRAINER 1/4 DEPTH W/ 90 DEG ELBOW
Mfg. item #: SS-3
TRKSS-3
FREE shipping when ordered with a machine from this manufacturer.20
$119.00

1286
NP-3
FOR 3 PUMPS, REDUCED TO ADJUSTABLE FLOW NOZZLE (1 1/2)
Mfg. item #: NP-3
TRKNP-3
FREE shipping when ordered with a machine from this manufacturer.20
$169.00

1286
FSK-1
Conversion kit for 3pt models
Mfg. item #: FSK-1
TRKFSK-1
FREE shipping when ordered with a machine from this manufacturer.20
$99.00

2822
Copyright © 2018 Smith-Hamilton, Inc
0.007 160525 08:41