Technical Sales 1–800–458–3687

Baileigh TS-1040C Contractor Table Saw

 TS-1044H Hybrid Table Saw  TS-1040E-30 Entry Level Cabinet Saw  TS-1040E-50 Entry Level Cabinet Saw TS-1040P-30 Riving Knife Table Saw  TS-1040P-50 Riving Knife Table Saw
 TS-1044H
Hybrid Table Saw
 TS-1040E-30 Entry Level Cabinet Saw  TS-1040E-50 Entry Level Cabinet Saw TS-1040P-30 Riving Knife Table Saw TS-1040P-50 Riving Knife Table Saw

 

Models
TS-1044H 110/220V SINGLE PHASE, (PREWIRED 110V) 10 HYBRID STYLE TABLE SAW
TS-1040E-30 220V SINGLE PHASE, 10 ENTRY LEVEL CABINET STYLE TABLE SAW, 40 X 27 TABLE
TS-1040E-50 220V 1PH, 10 ENTRY LEVEL CABINET STYLE TABLE SAW, 40 X 27 TABLE 2.5 HP, BLADE GUARD
TS-1040P-30 C3HP 220V SINGLE PHASE, 10 PROFESSIONAL CABINET STYLE TABLE SAW, 40 X 27 TABLE, 30 MAX RIP CUT
TS-1040P-50 3HP 220V SINGLE PHASE, 10 PROFESSIONAL CABINET STYLE TABLE SAW, 40 X 27 TABLE, 50 MAX RIP CUT

 

wood working tablesaw

Hybrid Table Saw TS-1044H 

1008077 

Made in Taiwan

Trying to figure out if you need a cabinet saw or just a contractor style saw?  Well Baileigh Industrial might just have the answer for you, the TS-1044H 10 inch hybrid table saw is the best of both worlds. The voltage and mobility of a contractor saw, with the structure and accuracy of a good cabinet saw.  The TS-1044H has a 1.75 hp motor that can be run on either 110 or 220 volt single phase power and turns at 4000 rpm.  Since the voltage is selectable the TS-1044H hybrid saw will work in just about any shop home or professional.

The TS-1044H has an enormous 44 x 27 inch all machined cast iron table.  Another unique feature of the TS-1044H is the heavy duty rip fence that incorporates a digital readout for rip capacity.  Just zero the DRO at the blade and away you go.  No second guessing the length of cut.  Other standard features to the TS-1044H are; miter gauge, zero clearance table inserts, deluxe rip fence and 4 inch dust collection port.

 
Specifications
Model TS-1044H
Dust Collection Port 4 inch
Table Size (Length) 20 inch
Table Size (Width) 27 inch
Table Saw Working Table 44 x 27 inch
Table Saw Blade Diameter 10 inch
Table Saw RPM 4000
Table Saw Arbor 5/8 inch
Table Saw Cutting Height at 90 degree 3-1/8 inch
Table Saw Cutting Height at 45 degree 2-1/8 inch
Maximum Dado Diameter 8 inch
Maximum Dado Width 13/16 inch
Maximum Rip Cut (Right) 36 inch
Power 110/220V Single Phase(Prewired 110V)
Length 48 inch
Width 29 inch
Height 37 inch
Horse Power 1.75
Weight (lbs) 260

specifications subject to change without notice.

wood working tablesaw

Entry Level Cabinet Saw TS-1040E-30

This excellent starter cabinet-style table saw includes features typically found only on more expensive tables, like a Leeson motor, UHMW rip fence, and massive trunnion.

  • 30 inch right-side rip capacity.
  • 2 hp Leeson motor turns the blade at 3,850 rpm.
  • Runs on 220-volt single-phase power.
  • Uses standard 10 inch blades with 5/8 inch arbor.
  • Comes with both standard and dado inserts.
  • 40 x 27 inch table and extensions made from precision-ground cast iron.
  • Table is webbed into the base with a crisscross pattern that prevents warping or shrinkage. The cast iron surface will remain true.
  • Extension boards help you cut materials that are big and tough to handle.
  • Heavy-duty hardened UHMW plastic rip fence makes it easy to slide material towards the blade.
  • You can cheaply replace the rip fence if you drill into it (convenient if you use unusually-shaped jigs).
  • Designed with a trunnion attached to the the base to keep the machine wobble-free and accurate.
  • Attached trunnion also dampens noise to a safe decibel range.
  • Robust welded steel framework minimizes vibrations, so you dont have to worry about the blade shifting back and forth with the table.
  • 2 steel handwheels on the cabinet allow you to change the blade height and the miter angle.
  • Miter gauge located on base.
  • 4 inch dust collection port lets you hook up an extraction system.
  • Slanted surface inside cabinet directs sawdust towards the port to eliminate build-up.
  • CSA approved.
  • Safety guard on the blade has reverse teeth to prevent kickback.
  • Riving knife spreads the wood as you’re cutting to avoid twisting or pinching.
  • We keep this saw and replacement parts in stock for fast shipping.
  • Protected by a 1-year parts warranty.
  • You can depend on lifetime technical support by phone. Whenever you need help or have questions, you can call up a team of reps with hands-on machine experience.

Recommended for: Small woodworking businesses that need a high-quality saw to use for a few hours a day.

Specifications
Item Number TS-1040E-30
Shipping Weight 370 lbs.
Table Size (Length) 20 inch
Table Size (Width) 27 inch
Table Saw Working Table 40 x 27 inch
Table Saw Blade Diameter 10 inch
Table Saw RPM 3850
Table Saw Arbor 5/8 inch
Table Saw Cutting Height at 90° 3-1/8 inch
Table Saw Cutting Height at 45° 2-3/16 inch
Maximum Dado Diameter 8 inch
Maximum Dado Width 13/16 inch
Maximum Rip Cut (Right) 30 inch
Power 220V Single Phase
Horse Power 2

specifications subject to change without notice.

 

wood working tablesaw

Entry Level Cabinet Saw TS-1040E-50

1008074

If you are looking for a great entry level cabinet maker table saw, take a look at the TS-1040E series from Baileigh Industrial.  This saw has many features only found on more expensive saws.  Available with 30 inch and 50 inch right side rip capacities, this 10 inch table saw will be at home in any shop.  The TS-1040E has a 2 hp motor 220 volt single phase power and turns at 3850 rpm.

The table and extensions for the TS-1040E are made from precision ground cast iron.  The TS-1040E-30 has a 30 inch extension board and the TS-1040E-50 has a 50 inch extension board.  Extension boards are great for those materials that are really big and tough to handle.  Other standard features to the TS-1040E series are; miter gauge, standard and dado inserts, deluxe rip fence and 4 inch dust collection port.

Specifications
Model TS-1040E-50
Dust Collection Port 4 inch
Number of Outlets 1
Table Size (Length) 20 inch
Table Size (Width) 27 inch
Table Saw Working Table 60 x 27 inch
Table Saw Blade Diameter 10 inch
Table Saw RPM 3850
Table Saw Arbor 5/8 inch
Table Saw Cutting Height at 90 degree 3-1/8 inch
Table Saw Cutting Height at 45 degree 2-3/16 inch
Maximum Dado Diameter 8 inch
Maximum Dado Width 13/16 inch
Maximum Rip Cut (Right) 50 inch
Power 220V Single Phase
Length 60 inch
Width 38 inch
Height 62 inch
Horse Power 2
Weight (lbs) 390

specifications subject to change without notice.

 

wood working tablesaw

Riving Knife Table Saw TS-1040P-30  SKU: 1008075

We designed this 550-pound cabinet saw for professional accuracy. The steel base and cast-iron table reduce vibrations and keep correct alignment, so you can make perfect joints.

  • 30 inch right-side rip capacity.
  • 3 hp Leeson motor turns at 4,300 rpm and cuts maple like it was pine.
  • The motor gets up to full speed in seconds.
  • Runs on 220-volt single-phase power, so it will work in almost any shop.
  • Uses standard 10 inch blades with 5/8 inch arbor.
  • Includes standard and dado inserts.
  • 40 x 27 inch table, made of cast iron, with 30 inch extension boards, made of impregnated poly, help you handle large, awkward pieces.
  • Tabletop is webbed into the base to stay square and true. Heat and moisture in your shop won’t warp it.
  • Wood glides across the ground and polished cast iron table surface. You can bring back the original smooth shine even after years of use.
  • Rip fence made of heavy UHMW plastic makes it easy for you to slide wood.
  • You can inexpensively replace the rip fence plastic—convenient if you drill into it while using a unusually-shaped jig.
  • Steel handwheels with locks on the base let you adjust the blade height and miter angle.
  • Comes standard with a miter gauge for repeatability.
  • Trunnion attached to the base prevents the machine from wobbling and keeps noise within a safe decibel range.
  • Rigid all-steel base keeps the saw stable and aligned, so the blade will cut correctly (without unintended movement or mitering).
  • 4 inch dust collection port to hook up an extraction system and suck out sawdust.
  • CSA approved, with safety features like an anti-kickback blade guard and a quick-release riving knife.
  • Covered by a 1-year parts warranty.
  • You can count on lifetime technical support by phone. Call up our team of reps (all with hands-on machine experience) whenever you have questions or problems.
  • We typically keep all replacement parts in stock for fast deliveries.

Recommended for: Cabinetry, kitchen build-ins and shelving, furniture, live edge, or reclaimed lumber.

Specifications
Model TS-1040P-30
Table Size (Length) 20 inch
Table Size (Width) 27 inch
Table Saw Working Table 40 x 27 inch
Table Saw Blade Diameter 10 inch
Table Saw RPM 4300
Table Saw Arbor 5/8 inch
Table Saw Cutting Height at 90 degree 3-1/8 inch
Table Saw Cutting Height at 45 degree 2-3/16 inch
Maximum Dado Diameter 8 inch
Maximum Dado Width 13/16 inch
Maximum Rip Cut (Right) 30 inch
Power 220V Single Phase
Horse Power 3
Weight (lbs) 550

specifications subject to change without notice.

 

wood working tablesaw

Riving Knife Table Saw TS-1040P-50 

1008076

Professional cabinet table saws are a must for any woodworking shop.  The TS-1040P riving knife table saw is a great saw for making perfect joints in cabinets and other projects.  Available in two versions the TS-1040P-30 and the TS-1040P-50, the last number refer to the length of the right side rip capacities. This 10 inch table saw will be at home in any shop. Because of the 3hp Leeson motor that can be run on 220 volt single phase power and turns at 4300 rpm.

The table and extensions for the TS-1040P are made from precision ground cast iron.  These tables are placed upon a super rigid all steel base for accurate alignment.  The TS-1040P-30 has a 30 inch extension board and the TS-1040P-50 has a 50 inch extension board.  Extension boards are great for those materials that are really big and tough to handle.  Other standard features to the TS-1040E series are; miter gauge, standard and dado inserts, deluxe rip fence and 4 inch dust collection port.  For more information contact a representative today.

Specifications
Model TS-1040P-50
Dust Collection Port 4 inch
Number of Outlets 1
Table Size (Length) 20 inch
Table Size (Width) 27 inch
Table Saw Working Table 60 x 27 inch
Table Saw Blade Diameter 10 inch
Table Saw RPM 4300
Table Saw Arbor 5/8 inch
Table Saw Cutting Height at 90 degree 3-1/8 inch
Table Saw Cutting Height at 45 degree 2-3/16 inch
Maximum Dado Diameter 8 inch
Maximum Dado Width 13/16 inch
Maximum Rip Cut (Right) 50 inch
Power 220V Single Phase
Length 60 inch
Width 38 inch
Height 62 inch
Horse Power 3
Weight (lbs) 590

specifications subject to change without notice.

vega table saw fence

Table Saw Fence

COMPARE PERFORMANCE and PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….

  1. Do not lock parallel to saw blade.
  2. Do not have accurate measuring scales.
  3. Have Fence Bars that are too short.
  4. Do not have adequate width ripping capacity.
  5. Require frequent re-alignment.
  6. Lack safety devices.
  7. Are unable to be finely adjusted.

The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.

Product Description

MODEL PRO 26, PRO 40, and PRO 50

The Professional Model features the ruggedness and durability for Commercial production requirement, yet is extremely refined for the serious woodworkers needs and wants. With larger components and greater rigidity, the Professional Model is designed for 10 - 12 inch Saws cutting heavier materials and commercial use. The Vega retrofit Saw Fence System is available with 26, 40 or 50 inch rip capacity to the right of the blade and 10″ to the left, with a standard fence length of 42 inch on models PRO 26, PRO 40, and PRO 50. For saw tables between 34 and 42 inches deep, the PRO 26L, PRO 40L, AND PRO 50L ARE available featuring a 50 inch fence bar.

UTILITY MODEL 26 or 50

Designed for contractors saws, smaller cabinet saws, and 10 inch saws that don’t receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Util- ity Fence will upgrade your saw to a very precise cutting machine at a very rea- sonable price.

The Utility Model Vega Saw Fence System is available with 26 or 50 inch rip capacity to the right of the blade and 8 inch to the left.

FENCE ACCESSORIES

Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.

You compare the features!

EASY TO INSTALL

No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) “I found the Vega Model 50 the easiest to install of all the fences.”

Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66, most Sears 10 inch saws and most other saws having fence rail mounting holes 8 -9 inch on either side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.) Features which help make this Fence so easy to install include:

  1. Pre-drilled and tapped holes to fit most saws.
  2. Slotted Front Brackets to allow vertical and horizontal adjustments.
  3. Jacking Plates to assist in leveling the Fence Rails
  4. Easy to follow instructions.

ALUMINUM FENCE HEAD

Extruded from 6005 - T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fit and nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for low friction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.

EXCLUSIVE MICRO ADJUSTMENTS!

The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, this is a necessary feature. The Micro  Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod  thumb nut combination. For the final adjustment of only a few thousandths of an inch, Vega provides a threaded mechanism for final, precise setting.

To operate the Micro Adjust:

  1. Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
  2. Release the Main Cam.
  3. Rotate the Thumb Nut under the Fence head to move the Fence very precisely… (one full rotation of the nut is 1/16 inch)
  4. After adjusting is complete, lock the Main Cam.

NO MORE BUMPING…

… and hoping for the best! With other saw fences precise adjustments is achieved using this technique.

MADE OF HIGH QUALITY MATERIALS

Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, the highest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.

A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extension plates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.

B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2 inch square tube predrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, high durability, and an attractive finish.

C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatness held to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which provides extreme surface hardness and low friction.

D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for the front guide rail and simply bolt to the saw table through existing holes (in most saws).

E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.

F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guide rail.

Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Rails to support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.

Vega Fence Models

Model Rip Capacity Right Rip Capacity Left Fence Bar Length Front Rail Dia.
Vega Utility 26 26 8 36 inch 1-3/4 inch
Vega Utility 50 50 8 36 inch 1-3/4 inch
Vega Pro 40 40 10 42 inch 2 inch
Vega Pro 50 50 10 42 inch 2 inch
Vega Pro 40L 40 10 50 inch 2 inch
Vega Pro 50L 50 10 50 inch 2 inch
Models
72024 Utility Saw Fence 26 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72025 Utility Saw Fence 50 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72578 Pro 40 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA
72580 Pro 50 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA



 

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener

 

1020029
^^ 110V 1PHASE, 10 HYBRID STYLE TABLE SAW ** WEIGHT = 410 LBS / MADE IN TAIWAN
EXCLUSIVE BROTHER-IN-LAW SPECIAL CALL 800-458-3687 X1 FOR MORE DETAILS ** LIMITED TIME OFFER
Mfg. item #: 1020029
BAITS-1044H
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,849.00

0   1
1229612
^^ 220V 1PHASE, 10 ENTRY LEVEL CABINET STYLE TABLE SAW, 40 X 27 TABLE ** WEIGHT = 510 LBS / MADE IN TAIWAN
EXCLUSIVE BROTHER-IN-LAW SPECIAL CALL 800-458-3687 X1 FOR MORE DETAILS ** LIMITED TIME OFFER
Mfg. item #: 1229612
BAITS-1040E-30
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,158.00

0
1229613
^^ 2HP 220V 1PHASE, 10 ENTRY LEVEL CABINET STYLE TABLE SAW, 40 X 27, BLADE GUARD ** WEIGHT = 550 LBS / MADE IN TAIWAN
EXCLUSIVE BROTHER-IN-LAW SPECIAL CALL 800-458-3687 X1 FOR MORE DETAILS ** LIMITED TIME OFFER
Mfg. item #: 1229613
BAITS-1040E-50
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,261.00

0
1229614
^^ 3HP 220V 1PHASE, 10 PROFESSIONAL CABINET STYLE TABLE SAW, 40 X 27 TABLE, 30 MAX RIP CUT ** WEIGHT = 620 LBS / MADE IN TAIWAN
EXCLUSIVE BROTHER-IN-LAW SPECIAL CALL 800-458-3687 X1 FOR MORE DETAILS ** LIMITED TIME OFFER
Mfg. item #: 1229614
BAITS-1040P-30
lease to own for as little as:$62 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,345.00

0
1229615
^^ 3HP 220V 1PHASE, 10 PROFESSIONAL CABINET STYLE TABLE SAW, 40 X 27 TABLE, 50 MAX RIP CUT ** WEIGHT = 670 LBS / MADE IN TAIWAN
EXCLUSIVE BROTHER-IN-LAW SPECIAL CALL 800-458-3687 X1 FOR MORE DETAILS ** LIMITED TIME OFFER
Mfg. item #: 1229615
BAITS-1040P-50
lease to own for as little as:$64 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,446.00

0
72024
UTILITY SAW FENCE 26 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72024
VEGA72024
$39.95 Freight on orders from this manufacturer.1021
$299.00

32
72025
UTILITY SAW FENCE 50 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72025
VEGA72025
$39.95 Freight on orders from this manufacturer.1021
$329.00

32
72578
PRO 40 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72578
VEGA72578
$39.95 Freight on orders from this manufacturer.1021
$369.00

32
72580
PRO 50 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72580
VEGA72580
$39.95 Freight on orders from this manufacturer.1021
$349.00

32
812
SAW BLADE SHARPENER ** SHIPPING WEIGHT = 20 LBS
Mfg. item #: 812
OLV812
FREE shipping when ordered with a machine from this manufacturer.20
$249.99

816
Copyright © 2021 Smith-Hamilton, Inc
0.011 210326 15:08