Technical Sales 1–800–458–3687

Baileigh WL-1847VS Variable Speed Wood L

wood lathes

 
supernova 2 chuck   easy wood tools
The recomended Chuck for this lathe
is a Teknatool SuperNova 2
Click the image above for more infomation
Dont forget your turning tools
Check out or full line of easy wood tools
 

 

Variable Speed Wood Lathe WL-1847VS 

1008389

The WL-1847VS variable speed wood lathe from Baileigh Industrial combines great value with many features not found on lathes of this price.  This is a large 18 x 47 inch wood lathe that is built on an all cast iron base to eliminate vibration and increase stability.  A Delta inverter handles all the power for the WL-1847VS and allows the spindle to turn from 0 to 3200 rpm and has a digital read out for accurate speed measurement.  It also includes and MT2 spindle and tailstock.

This economical wood lathe runs on 220 volt single phase power, which enables it to run in just about any shop.    A 6 inch face plate and massive 14 inch tool rest is also included in this great package.

Specifications
Model WL-1847VS
Swing 18 inch
Spindle MT2
Tailstock MT2
Rpm 0-3200
Tailstock Travel 4 inch
Tool Rest 14 inch
TPI 1-1/4 inch x 8
Face Plate 6 inch
Power 220V Single Phase
Length 65 inch
Width 36 inch
Height 48 inch
Horse Power 2
Weight (lbs) 600

specifications subject to change without notice.

JET CHUCK SET (719900)

JET Lathe Chuck Set 1 inch x 8TPI

To compliment our extensive line of woodturning lathes, JET is introducing a nickel plated chuck with five unique sets of jaws, to keep projects securely on your lathe. Inside the custom JET molded case you will find: 1x Nickel Plated Chuck 1 inch X 8TPI 1x 190mm Nickel Plated Face Plate with 16 Grip studs 1x Nickel Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm) 1x #1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm) 1x #2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm) 1x Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm) 2x Woodworm screw (1/2 and 3/8 inch) 1x T-handle 1x 100mm Hex wrench The Jet Chuck Set (719900) fits JET models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1 inch x 8TPI Spindle Thread. To fit to JET JWL-1640 and JWL-1840 (or any 1-1/4" spindle thread) use the JET Lathe Chuck Adaptor (719903).

Features:

  • Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread.
  • Packed securely in a hard plastic JET case with EVA foam.
  • Chuck is nickel plated to deter rust
  • Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks
  • Stainless steel T-Handle adjusts jaws concentrically
  • Weight 11 lbs

JET CHUCK SET (719900)
Inside the custom JET molded case you will find:

  • Nickel Plated Chuck 1 inch X 8TPI
  • 190mm Nickel Plated Face Plate with 16 Grip studs
  • Nickel Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm)
  • #1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm)
  • #2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm)
  • Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm)
  • Woodworm screws (1/2 and 3/8 inch)
  • T-handle and Hex wrench The JET Chuck Set (719900) fits JET models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1inch x 8TPI Spindle Thread

 

JET Woodturning Carbide Chisels 6 Piece Set - (719901)

JET Woodturning Carbide Chisels 6 Piece Set - (719901)

To compliment our extensive line of woodturning lathes, JET is introducing the Woodturning Chisel Set. Inside the custom JET wooden case you will find: 1x 11 inch Anodized Aluminum Handle 1x 10.5 inch Anodized Aluminum Handle Extension 1x Stainless Steel Tool Shaft 1x 11mm Square Carbide Cutting Blade 1x 11mm Square-Arc Carbide Cutting Blade 1x 12mm Round Carbide Cutting Blade 1x 28mm Carbide Diamond Cutting Blade 1x Star Key 1x Hex Wrench

Features:

  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11 inch with a 10.5 inch extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
     

JET Woodturning Carbide Hollowing Chisels Set 5PC

JET Woodturning Carbide Hollowing Chisels Set 5PC

To compliment our extensive line of woodturning lathes, JET is introducing the Woodturning Hollowing Chisel Set. Inside the custom JET wooden case you will find: 1x 11 inch Anodized Aluminum Handle 1x 10.5 inch Anodized Aluminum Handle Extension 3x Tool Shafts 3x 8.9mm Round Carbide Cutting Blades 1x Star Key 1x Hex Wrench

Features:

  • JET Carbide Hollowing Chisels Set includes 3 interchangeable radius for hollowing while works on the lathe
  • Light weight extendable anodized aluminum handle. Main handle is 11 inch with a 10.5 inch extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
Jet Chuck and Turning Tools
719900 JET Lathe Chuck
719901 JET Wood Turning Chisel Set
719902 JET Wood Turning Hollowing Chisel Set
719903 1 inch x 8TPI to 1-1/4 inch x 8TPI adaptor
719951 11mm Sq Carbide Insert 2PC
719952 11mm Sq Arc Carbide Insert 2PC
719953 12mm Round Carbide Insert 2PC
719954 28mm Diamond Carbide Insert 2PC
719955 8.9mm Round Carbide Insert 2PC

 

NEW! PRO-TEK SERIES CHUCKS & JAWS

Click here to download Pro-Tek G3 Manual

Click here to download Pro-Tek Supernova 2 Manual

NEW! PRO-TEK SERIES CHUCKS and JAWS

From the inNOVAtors of the original woodturning chuck comes the next generation of chucks – the NEW! PRO-TEK Series self centering chucks and jaws deliver the next generation of inNOVAtion in woodturning. The powerful gearing grip delivers tremendous slide holding power offering solid, vibration free performance, each and every time you turn. The PRO-TEK series of chucks are compatible with the same accessory range as other NOVA Chucks, and feature premium upgrades including:

  • Premium rust resistant nickel plating, ideal for turning green wood.
  • Stronger and more versatile 50mm/2 inch NEW! PRO-TEK Jaws with an improved dovetail AND serrated profile for maximum control. The
  • unique woodworking dovetail profile pulls the project into the chuck and holds round and square blanks firmly.
  • Upgraded 6 point star fasteners exerting more torque with ease, offering better holding power and minimizing strip out for longer life.
  • Jaw fastening wrench upgraded to T-bar handle (from hex wrench) for reduced stripping; and enabling quicker tightening of screws
  • which are easier on hands.
  • Intuitive clockwise scroll rotation for ease of use.
  • CNC precision machined for unparalleled tolerances and accuracy.
  • Fully sealed indexing backing plate reinforced with stranded glass fibers for extreme durability that protects the internal gearing from
  • moisture and debris creating low maintenance and ensuring a longer life. (PRO-TEK SUPERNOVA2 ONLY)
  • Stand out NOVA RED backing plate adds an additional safety measure for use in operation. (PRO-TEK SUPERNOVA2 ONLY)
  • Powerful geared grip delivers tremendous slide holding power.
  • Self-lubricating copper-infused precision-cast jaw slides for effortless movement and resistance to wear and tear.
  • Single-handed operation offers fast and convenient mounting for your project: quicker setup equals more time to turn.
  • Captured pinion and ball nose hex wrench with large, easy grip handle allows unique tilt-away action especially handy when working
  • with larger workpieces.
  • Rotation arrow for easy reference and fast opening and closing action.
  • Auto safety stop feature to keep Jaw slides from protruding past the chuck body.
  • Jaw mounting profile is cross-compatible with all NOVA chucks.
  • NOVA’s Spindle Adaptor system  fit your NOVA Insert chuck to various lathe spindle threads.
  • Safe Lock woodworm screw included for fast mounting of rough material.
  • FREE! NOVA microfiber workshop towel (11.5 x 10.5 inch) to help keep your chuck and jaws well maintained.
  • 6 Year Full Replacement Warranty  Best in Market!

PRO-TEK G3 CHUCK and JAWS SPECIFICATIONS

  • Chuck recommended for 10 to 16 inch lathes. Diameter 88.5mm/3.45 inch, height 44mm/1.72 inch.
  • PRO-TEK Jaws (50mm/2 inch) included best for projects up to 310mm/12 inch bowl and up to 150mm/6 inch length spigots.
  • Insert chucks require an insert (sold separately).

PRO-TEK SUPERNOVA2 CHUCK and JAWS SPECIFICATIONS

  • Recommended for lathes from 350mm/14 inch to 508mm/20 inch diameter swing. Diameter 98.5mm/3.84 inch, height 48mm/1.87 inch
  • PRO-TEK Jaws (50mm/2 inch) for projects up to 310mm/12 inch bowl and up to 150mm/6 inch length spigots.
  • 24 Division Index built into the backing plate design.
  • Insert chucks require an insert (sold separately).

ALL PRO-TEK BUNDLES INCLUDE:

  • PRO-TEK 50mm Jaws
  • Woodworm Screw
  • T-Bar Chuck Key
  • 6 Point Star Fasteners (8) and T Handle Wrench
  • Fibre Washers and Allen Wrench
  • Set Screw
  • BONUS NOVA Microfiber Workshop Towel
  • NOVA Chuck and Jaw Hard Storage Case

 

Chucks Require Seperate Insert for Final Insulation

Pro-Tek Series
48290 NOVA PRO-TEK G3 INSERT THREAD CHUCK and JAWS   
48291 NOVA PRO-TEK G3 DIRECT THREAD 1 inch x 8TPI REVERSIBLE CHUCK and JAWS
48293 NOVA PRO-TEK G3 DIRECT THREAD 1 inch x 8TPI REVERSIBLE CHUCK BUNDLE
23108 NOVA PRO-TEK SUPERNOVA2 INSERT CHUCK BUNDLE
23262 NOVA PRO-TEK SUPERNOVA2 INSERT CHUCK and JAWS

Chucks Require Seperate Insert for Final Insulation

 

Chucks Require Seperate Insert for Final Insulation

Teknatool Wood Turning Lathe Chuck Inserts
I3NS Inset Nova M20 x 1.5 RH
I6NS Insert Nova 3/4" Plain Bore
I7NS Insert Nova 1 1/8" 8 TPI UNC RH
I8NS Insert Nova 7/8" 12 TPI UN LH
I9NS Insert Nova 3/4" 16 TPI UNF RH
IANS Insert Nova 3/4" 14 TPI RH
IBNS Insert Nova 3/4" 14 TPI LH
ICNS insert Nova 1" 10 TPI RH
IDNS Insert Nova 1"  8 TPI RH
IENS Insert Nova 1" 12 TPI RH
IHNS Insert Nova 3/4" 10 TPI BSW
IINS Inset Nova M24 x 3 RH
IJNS Insert Nova 1 1/8" 12 TPI RH
IKNS Insert Nova M18 x 2.5 RH
ILNS Insert Nova 1 1/4"  8 TPI UNS
IMNS Insert Nova 1" 10 TPI LH
INNS Insert Nova Blank
IONS Insert Nova 1 1/8" 7 TPI RH
IQMS Insert Nova M30 x 3.5 RH
ISNS Insert Nova SHOPSMITH 5/8" Plain Bore
ITNS Insert Nova 1" 8 TPI RH & LH
IUNS Insert Nova 1 1/8"  12TPI UNF RH
IVNS Insert Nova 7/8" 14 TPI RH
IWNS Insert Nova M25 x 2 RH
IXNS Insert Nova 1" 8 TPI RH  
IYNS Insert Nova 1 1/4" 8 TPI UNS RH 
Teknatool Wood Turning Lathe Chuck Jaws
JS25N 25mm Jaws
JS50N 50mm Jaws
JS75DT 75mm Step Jaws
JS100N 100mm Jaws
JS-SP35 35mm Spigot Jaws
JS-SP45 45mm Spigot Jaws
JSPIN Pin Jaws
JSCOLE Cole Jaws
6006 Mini Cole Jaws
6017 Long Nose Jaws
6014 Bowl Jaws 75mm
6019 Bowl Jaws 35mm
JS130N 130mm Jumbo Jaws
PJSN PowerGrip Jaws
6021 Soft Jaws
JS20N 20mm Mini Jaw
JS70N 70mm Mini Jaw
6025 Mini Step Jaw
6026 Mini Spigot Jaw
6027 4 Piece Jaw Set
6034 Nova Pen Plus Jaws
Teknatool Wood Turning Lathe Chuck Accessories
23079 Nova Universal Spanner Wrench
10051 10 in 1 Chuck Gage
6008 Dovetail Chisel
10006 Woodworm Screw
NSFK Nova Chuck Spares Kit
SSK Spare Jaws Screw Kit
WWCJ Cole Jaw Woodworm Screw
CJFK Cole jaw Fastening Kit
NCSC Nova Chuck Spu Center
6000 Faceplate Ring 50mm
6001 Faceplate Ring 100mm
6002 Faceplate Ring 130mm
6030 Cole Jaw Buffer Kit

 

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

Woodworking Lathe Chucks, Tools & Duplicators
Teknatool Midi LAthe Chuck easy wood tools
TeknaTool Nova Precision Lathe
Chuck,Jaws & Inserts
Easy Lathe Tools & Chucks

 

1008389
220V SINGLE PHASE VARIABLE SPEED WOOD TURNING LATHE, 18 SWING, 47 BETWEEN CENTERS / MADE IN CHINA / WGT = 550 LBS / SHIPS LTL TRUCK FREIGHT (SKU 1008389)
CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER -IN LAW DEAL ON THIS BAILEIGH ITEM
Mfg. item #: 1008389
BAIWL-1847VS
lease to own for as little as:$63 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,470.00

38
719900
JET LATHE CHUCK, MADE IN CHINA, WGT = 11 LBS, SHIPS BEST WAY
Mfg. item #: 719900
WMH719900
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment8
NEW ITEM
$412.11

18
719901
JET WOOD TURNING CHISEL SET , MADE IN CHINA, WGT = 4 LBS, SHIPS BEST WAY
Mfg. item #: 719901
WMH719901
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment1019
NEW ITEM
$199.99

18
719902
JET WOOD TURNING HOLLOWING CHISEL SET, MADE IN CHINA, WGT = 4 LBS, SHIPS BEST WAY
Mfg. item #: 719902
WMH719902
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment1019
NEW ITEM
$199.99

18
719903
1X8TPI TO 1-1/4X8TPI ADAPTOR, MADE IN CHINAWGT = 1 LBS, SHIPS BEST WAY
Mfg. item #: 719903
WMH719903
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$37.19

18
719951
11MM SQ CARBIDE INSERT 2PC, MADE IN CHINAWGT = 1 LBS, SHIPS BEST WAY
Mfg. item #: 719951
WMH719951
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$49.59

18
719952
11MM SQ ARC CARBIDE INSERT 2PC, MADE IN CHINAWGT = 1 LBS, SHIPS BEST WAY
Mfg. item #: 719952
WMH719952
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$49.59

18
719953
12MM ROUND CARBIDE INSERT 2PC, MADE IN CHINAWGT = 1 LBS, SHIPS BEST WAY
Mfg. item #: 719953
WMH719953
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$49.59

18
719954
28MM DIAMOND CARBIDE INSERT 2PC, MADE IN CHINAWGT = 1 LBS, SHIPS BEST WAY
Mfg. item #: 719954
WMH719954
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$49.59

18
719955
8.9MM ROUND CARBIDE INSERT 2PC, MADE IN CHINAWGT = 1 LBS, SHIPS BEST WAY
Mfg. item #: 719955
WMH719955
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
$49.59

18
48290
NEW - PRO-TEK G3 CHUCK INSERT VERSION
Mfg. item #: 48290
TEK48290
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$159.99

90
48291
NEW - PRO-TEK G3 CHUCK DIRECT THREAD VERSION 1 - 8 TPI
Mfg. item #: 48291
TEK48291
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$169.99

90
48293
NEW - PRO-TEK G3 BUNDLE (INCLUDES 48291, JS100N, JSPIN)
Mfg. item #: 48293
TEK48293
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$219.99

90
23108
NEW - SN2 PRO-TEK BUNDLE (INCLUDES 23262 INSERT CHUCK, JS100N, JS130N)
Mfg. item #: 23108
TEK23108
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$249.99

90
23262
NEW - PRO-TEK SN2 CHUCK INSERT VERSION
Mfg. item #: 23262
TEK23262
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$199.99

90
I3NS
INSET NOVA M20 X 1.5 RH
Mfg. item #: I3NS
TEKI3NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
I6NS
INSERT NOVA 3/4 PLAIN BORE
Mfg. item #: I6NS
TEKI6NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
I7NS
INSERT NOVA 1 1/8 8 TPI UNC RH
Mfg. item #: I7NS
TEKI7NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
I8NS
INSERT NOVA 7/8 12 TPI UN LH
Mfg. item #: I8NS
TEKI8NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
I9NS
INSERT NOVA 3/4 16 TPI UNF RH
Mfg. item #: I9NS
TEKI9NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IANS
INSERT NOVA 3/4 4 TPI RH
Mfg. item #: IANS
TEKIANS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IBNS
INSERT NOVA 3/4 4 TPI LH
Mfg. item #: IBNS
TEKIBNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
ICNS
INSERT NOVA 1 10 TPI RH
Mfg. item #: ICNS
TEKICNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IDNS
INSERT NOVA 1 8 TPI RH
Mfg. item #: IDNS
TEKIDNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IENS
INSERT NOVA 1 12 TPI RH
Mfg. item #: IENS
TEKIENS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IHNS
INSERT NOVA 3/4 10 TPI BSW
Mfg. item #: IHNS
TEKIHNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IINS
INSET NOVA M24 X 3 RH
Mfg. item #: IINS
TEKIINS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IJNS
INSERT NOVA 1 1/8 12 TPI RH
Mfg. item #: IJNS
TEKIJNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IKNS
INSERT NOVA M18 X 2.5 RH
Mfg. item #: IKNS
TEKIKNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
ILNS
INSERT NOVA 1 1/4 8 TPI UNS
Mfg. item #: ILNS
TEKILNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IMNS
INSERT NOVA 1 10 TPI LH
Mfg. item #: IMNS
TEKIMNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
INNS
INSERT NOVA BLANK
Mfg. item #: INNS
TEKINNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IONS
INSERT NOVA 1 1/8 7 TPI RH
Mfg. item #: IONS
TEKIONS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IQMS
INSERT NOVA M30 X 3.5 RH
Mfg. item #: IQMS
TEKIQMS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$28.99

444
ISNS
INSERT NOVA SHOPSMITH 5/8 PLAIN BORE
Mfg. item #: ISNS
TEKISNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
ITNS
INSERT NOVA 1 8 TPI RH & LH
Mfg. item #: ITNS
TEKITNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IUNS
INSERT NOVA 1 1/8 12TPI UNF RH
Mfg. item #: IUNS
TEKIUNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IVNS
INSERT NOVA 7/8 14 TPI RH
Mfg. item #: IVNS
TEKIVNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IWNS
INSERT NOVA M25 X 2 RH
Mfg. item #: IWNS
TEKIWNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IXNS
INSERT NOVA 1 8 TPI RH W/SET SCREW FOR REV.
Mfg. item #: IXNS
TEKIXNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
IYNS
INSERT NOVA 1 1/4 8 TPI UNS RH
Mfg. item #: IYNS
TEKIYNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
JS25N
25MM JAWS
Mfg. item #: JS25N
TEKJS25N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$67.99

90
JS50N
50MM JAWS
Mfg. item #: JS50N
TEKJS50N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$67.99

90
JS75DT
75MM STEP JAWS
Mfg. item #: JS75DT
TEKJS75DT
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$81.99

90
JS100N
100MM JAWS
Mfg. item #: JS100N
TEKJS100N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$72.99

90
JS-SP35
35MM SPIGOT JAWS
Mfg. item #: JS-SP35
TEKJS-SP35
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$77.99

90
JS-SP45
45MM SPIGOT JAWS
Mfg. item #: JS-SP45
TEKJS-SP45
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$87.99

90
JSPIN
PIN JAWS
Mfg. item #: JSPIN
TEKJSPIN
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$74.99

90
JSCOLE
COLE JAWS
Mfg. item #: JSCOLE
TEKJSCOLE
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$94.99

90
6006
MINI COLE JAWS
Mfg. item #: 6006
TEK6006
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$81.99

90
6017
LONG NOSE JAWS
Mfg. item #: 6017
TEK6017
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$83.99

90
6014
BOWL JAWS 75MM
Mfg. item #: 6014
TEK6014
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$84.99

90
6019
BOWL JAWS 35MM
Mfg. item #: 6019
TEK6019
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$56.99

90
JS130N
130MM JUMBO JAWS
Mfg. item #: JS130N
TEKJS130N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$81.99

90
PJSN
POWERGRIP JAWS
Mfg. item #: PJSN
TEKPJSN
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$97.99

90
6021
SOFT JAWS
Mfg. item #: 6021
TEK6021
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$26.99

90
JS20N
20MM MINI JAW
Mfg. item #: JS20N
TEKJS20N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$49.99

90
JS70N
70MM MINI JAW
Mfg. item #: JS70N
TEKJS70N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$57.99

90
6025
MINI STEP JAW
Mfg. item #: 6025
TEK6025
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$57.99

90
6026
MINI SPIGOT JAW
Mfg. item #: 6026
TEK6026
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$55.99

90
6027
4 PIECE JAW SET
Mfg. item #: 6027
TEK6027
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$179.99

90
6034
NOVA PEN PLUS JAWS
Mfg. item #: 6034
TEK6034
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$54.99

90
23079
NOVA UNIVERSAL SPANNER WRENCH
Mfg. item #: 23079
TEK23079
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
10051
10 IN 1 CHUCK GAGE
Mfg. item #: 10051
TEK10051
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$22.99

90
6008
DOVETAIL CHISEL
Mfg. item #: 6008
TEK6008
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$62.99

90
10006
WOODWORM SCREW
Mfg. item #: 10006
TEK10006
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$30.99

90
NSFK
NOVA CHUCK SPARES KIT
Mfg. item #: NSFK
TEKNSFK
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$19.99

90
SSK
SPARE JAWS SCREW KIT
Mfg. item #: SSK
TEKSSK
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$7.99

90
WWCJ
COLE JAW WOODWORM SCREW
Mfg. item #: WWCJ
TEKWWCJ
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
CJFK
COLE JAW FASTENING KIT
Mfg. item #: CJFK
TEKCJFK
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$26.99

90
NCSC
NOVA CHUCK SPU CENTER
Mfg. item #: NCSC
TEKNCSC
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$30.99

90
6000
FACEPLATE RING 50MM
Mfg. item #: 6000
TEK6000
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$32.99

90
6001
FACEPLATE RING 100MM
Mfg. item #: 6001
TEK6001
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$54.99

90
6002
FACEPLATE RING 130MM
Mfg. item #: 6002
TEK6002
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$86.99

90
6030
COLE JAW BUFFER KIT
Mfg. item #: 6030
TEK6030
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

90
2200
REPLACEMENT CUTTER OPTION: CI2-R2 AND CI2-R2NR
Mfg. item #: 2200
EASY2200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

182
3200
REPLACEMENT CUTTER OPTIONS: CI1-SQ, CI1-R2 AND CI1-R2-NR
Mfg. item #: 3200
EASY3200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.99

182
6300
MID-SIZE EASY FINISHERČ REPLACEMENT CUTTER OPTION: CI3NR
Mfg. item #: 6300
EASY6300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

182
3400
PRO EASY FINISHERČ REPLACEMENT CUTTER OPTIONS: CI0-NR
Mfg. item #: 3400
EASY3400
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.99

182
7300
MID-SIZE EASY DETAILERČ REPLACEMENT CUTTER OPTION: CI4-NR
Mfg. item #: 7300
EASY7300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

182
3700
PRO EASY DETAILERČREPLACEMENT CUTTER OPTION: CI4-NR
Mfg. item #: 3700
EASY3700
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.99

182
Copyright © 2022 Smith-Hamilton, Inc
0.070 220509 11:09