Technical Sales 1–800–458–3687

Baileigh CNC Router Tables

DEM-0906 Desktop CNC Engraving Table DEM-1717 - Desktop CNC Engraver DEM-2720 Desktop CNC Engraver WR-32 CNC Router Table
DEM-0906
Desktop CNC Engraving Table
DEM-1717
Desktop CNC Engraver
DEM-2720
Desktop CNC Engraver
WR-32
CNC Router Table
 WR-84V CNC Router Table WR-84V-ATC CNC Router Table WR-105V-ATC CNC Wood Router Table
 WR-84V
CNC Router Table
WR-84V-ATC
CNC Router Table
WR-105V-ATC
CNC Wood Router Table

 

Models
DEM-0906 Desktop CNC Engraving Table
DEM-1717 Desktop CNC Engraver
DEM-2720 Desktop CNC Engraver
WR-32 CNC Router Table
WR-84V CNC Routing Table
WR-84V-ATC CNC Router Table
WR-105V-ATC CNC Wood Router Table
Accessories
DWR-6600H300 6mm Carbide Rotary Knife 6mm Shank
DWR-4635V090 90 Degree V Cutter Bit 4mm Shank
DWR-4635V060 60 Degree V Cutter Bit 4mm Shank
DWR-4635V030 30 Degree V Cutter Bit 4mm Shank
DWR-4400H150 4mm Carbide Rotary Knife 4mm Shank
DWR-4400B150 4mm Carbide End Mill 4mm Shank
DWR-4250B120 2.5mm Carbide End Mill 4mm Shank
DWR-4150E150 1.5R Carbide Half Conical Ball Nose Cutter Bit 4mm Shank
DWR-4100G040 1mm Carbide Tool 4mm Shank
DWR-4100E150 1.0R Carbide Half Conical Ball Nose Cutter Bit 4mm Shank
DWR-4100C150 1.0R Carbide Conical Ball Nose Cutter Bit 4mm Shank
DWR-4050E150 .5R Carbide Half Conical Ball Nose Cutter Bit 4mm Shank
DWR-4050C150 .5R Carbide Conical Ball Nose Cutter Bit 4mm Shank
DWR-4050A020 .5R Carbide Ball Nose Cutter Bit 4mm Shank
DWR-4025C150 .25R Carbide Conical Ball Nose Cutter Bit 4mm Shank
DWR-4025A020 .25R Carbide Ball Nose Cutter Bit 4mm Shank

 

Desktop CNC Engraving Table - DEM-0906

Desktop CNC Engraving Table - DEM-0906

The DEM-0906 is a small, lightweight, and portable mini desktop CNC engraver that is not only for small woodworking projects, but also for acrylic and ABS lathophane, EVA foam, styrofoam, modeling wax, plastic, soft metal. It's able to carve products like tooling boards, toolboxes, tiny ornaments and other miscelaneous projects.

The DEM-0906 portble CNC engraver comes with software, and tooling often not included with competing tables that cost more. Built to last and the router arrives fully assembled.

Features:

  • 12.6 x 5.9 inch table.
  • This small CNC engraver is recommended for sign-makers, and hobbyists.
  • Powerful 150 watt DC Brushless Motor.
  • Up to 15,000 rpm variable spindle speed.
  • Runs on 110v power.
  • Easy-to-learn design software; just install it onto your computer and start creating patterns.
  • Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
  • Stepper motors move the spindle at a maximum speed of 98.43 inch per minute.
  • Belt driven X, Y, and Z axis movement for accurate positioning.
  • 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
  • Laser engraver ready, (sold seperatly)
  • Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
  • The table ships pre-built with correct alignment for a fast and simple set-up - just an hour or so to uncrate the table and get started with the software.
  • Covered by a 1-year parts warranty.
  • Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.
Specifications
Item Number DEM-0906
Shipping Weight 42lbs
Special Notes Laser Engraver Ready, Sold Separately
Actual Working Area 8.66 x 6.3 inch
Speeds 0 - 15,000 rpm (Variable)
Z Axis Stroke 2.48 inch
Maximum Moving Speed (Inches Per Minute) 98.43
Maximum Engraving Speed (Inches Per Minute) 98.43
Reposition Accuracy .001 inch
Tool Diameters 4.0 mm
Power 110V
Length 15.36 inch
Width 15.75 inch
Height 16.73 inch
Weight (lbs) 33
Table Style T-Slot
Max. Table Load 6.61 lbs
Notes Includes Power Cord, USB 2.0 Cable, Controller, Allen Key_2.5mm and Spare Socket Screw, Silicone Mat, Tungsten Carbide Tool, Clamp set ( big x 2 pcs, small x 2 pcs ), Support Board
Shipping Dimensions (Inches) 22x21x21

specifications subject to change without notice.

DEM-1717 - Desktop CNC Engraver

DEM-1717 - Desktop CNC Engraver

The DEM-1717 is a desktop CNC router that is not only for small woodworking projects, but also for acrylic, ABS lathophane, EVA foam, styrofoam, modeling wax, plastic and soft metal. It's able to carve products like tooling boards, toolboxes, tiny ornaments, and other pojects.  The DEM-1717 and has also been used as teaching equipment in various high schools, and colleges worldwide.

The DEM-1717 CNC router table comes with software, and tooling often not included with competing tables that cost more. Built to last and the router arrives fully assembled.

Features:

  • 17 x 17 inch table.
  • Recommended for sign-makers, and hobbyists.
  • Powerful 200 watt DC Brushless Motor.
  • Up to 20,000 rpm variable spindle speed.
  • Runs on 110v power.
  • Easy-to-learn software; just install it onto your computer and start working.
  • Upload your design file to the table, then use the convenient handheld controller to move the spindle.
  • Stepper motors move the spindle at a maximum speed of 98.43 inch per minute.
  • Belt Drive X, Y, and Z axis movement for accurate positioning.
  • ER-11 - 4.0 mm tooling diameters.
  • 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
  • Laser engraver ready, (sold seperatly)
  • Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
  • The table ships pre-built with correct alignment for a fast and simple set-up just an hour or so to uncrate the table and get started with the software.
  • Covered by a 1-year parts warranty.
  • Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.
Specifications
Item Number DEM-1717
Shipping Weight 83lbs
Special Notes Laser Engraver Ready, Sold Separately
Actual Working Area 12 x 12 inch
Speeds 0 - 20,000 rpm
Z Axis Stroke 4 inch
Maximum Moving Speed (Inches Per Minute) 98.43
Maximum Engraving Speed (Inches Per Minute) 98.43
Reposition Accuracy .001 inch
Tool Diameters ER-11 - 4.0 mm
Power 110V
Length 21.26 inch
Width 20.87 inch
Height 20.87 inch
Weight (lbs) 75 lbs
Table Style T-Slot
Notes Includes Power Cord, USB 2.0 Cable, Controller, Allen Key_2.5mm and Spare Socket Screw, Silicone Mat, Tungsten Carbide Tool, Clamp set ( big x 2 pcs, small x 2 pcs ), Support Board
Shipping Dimensions (Inches) 22x21x21

specifications subject to change without notice

DEM-2720 Desktop CNC Engraver

DEM-2720 Desktop CNC Engraver

The DEM-2720 desktop CNC router table comes with software, and tooling often not included with competing tables that cost more. Built to last and the router arrives fully assembled.

Features:

  • 25.5 x 35.5 inch table.
  • Recommended for sign-makers, and hobbyists.
  • Powerful 200 watt DC Brushless Motor.
  • Up to 20,000 rpm variable spindle speed.
  • Runs on 110v power.
  • Easy-to-learn design software; just install it onto your computer and start creating patterns.
  • Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
  • Stepper motors move the spindle at a maximum speed of 98.43 inch per minute.
  • Lead screw X, Y, and Z axis movement for accurate positioning.
  • ER-11  4.0 mm tooling diameters.
  • 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
  • Laser engraver ready (Sold Seperatly)
  • Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
  • The desktop CNC router table ships pre-built with correct alignment for a fast and simple set-up just an hour or so to uncrate the table and get started with the software.
  • Covered by a 1-year parts warranty.
  • Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.
Specifications
Item Number DEM-2720
Shipping Weight 155lbs
Special Notes Laser Engraver Ready, Sold Separately
Actual Working Area 20 x 30 inch
Speeds 0 - 20,000 rpm
Z Axis Stroke 4 inch
Maximum Moving Speed (Inches Per Minute) 98.43
Maximum Engraving Speed (Inches Per Minute) 98.43
Reposition Accuracy .001 inch
Tool Diameters ER-11 - 4.0 mm
Power 110V
Length 31.5 inch
Width 39 inch
Height 21.6 inch
Weight (lbs) 155 lbs
Table Style T-Slot
Shipping Dimensions (Inches) 48x45x34

specifications subject to change without notice

CNC Router Table WR-32

CNC Router Table WR-32

The WR-32 CNC router table comes with software, tooling, and a dust shroud often not included with competing tables that cost more. Built to last with a cast iron base, the metal router arrives fully assembled.

Features:

  • 2’ x 3’ table.
  • Recommended for sign-makers, hobbyists, molding companies (plastic parts), research and development (R&D) shops, and industrial wood shops.
  • Powerful 4.75 hp spindle.
  • Up to 18,000 rpm variable spindle speed.
  • Runs on 220-volt single-phase power.
  • Easy-to-learn design software; just install it onto your computer and start creating patterns. (Details below.)
  • Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
  • Stepper motors move the spindle at a maximum speed of 6.5 inch per second.
  • Ball screw X and Y axis movement for accurate positioning.
  • Square slideways clamp the material down and keep it in alignment.
  • 4 collets choices,1/8 inch, 4mm, 6mm, and 1/2 inch (1 each) in the ER25 style.
  • Comes standard with 15 starter router profiles.
  • Air-cooled spindle prolongs machine life and helps to maintain high cut quality down the road.
  • 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
  • Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
  • The table ships pre-built with correct alignment for a fast and simple set-up just an hour or so to uncrate the table and get started with the software.
  • Rigid cast base and fully-welded steel frame reduce vibrations, so the table can cut correctly over decades of use.
  • Dust shroud fits over the spindle and vacuums sawdust off the table while you cut, keeping your shop neat.
  • Covered by a 1-year parts warranty.
  • Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.

The WR-32 comes standard with BobCAD-Cam V29 Express programming software. You can design or plot out your project on any computer and load the table via a USB drive

Specifications
Item Number WR-32
Shipping Weight 1100lbs
Actual Working Area 23.6 x 35.4 x 5.12 inch
Table Size (Length) 53.5 inch
Table Size (Width) 43.25 inch
Spindle Air cooled spindle
Z Axis Stroke 3.1 inch
Maximum Moving Speed (Inches Per Minute) 590
Maximum Engraving Speed (Inches Per Minute) 394
Reposition Accuracy .0019 inch
Tool Diameters ER25 Style in 1/8 inch, 4mm, 6mm, and 1/2 inch (1 each)
Power 220V Single Phase
Horse Power 4.75hp (3.5kw)
Weight (lbs) 728
Table Style T-Slot
Notes Applicable Material: Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
Shipping Dimensions (Inches) 59x48x59

specifications subject to change without notice

CNC router table

CNC Router Table WR-84V

With a welded steel frame, the WR-84V industrial wood router is built to last. Unlike many competing tables, this 4x8 CNC router table ships fully assembled and comes with software, tooling, and a dust shroud.

Features:

  • 4’ x 8’ table to fit common bulk industrial material sizes.
  • Perfect for solid wood processing, making closet doors, furniture, signs, and much more.
  • 0 to 18,000 rpm variable spindle speed range.
  • 7.4 hp spindle has the power to cut hardwoods quickly and precisely.
  • Spindle is air-cooled to prevent overheating, prolong the machine’s lifespan, keep it producing high-quality cuts.
  • 15,000 mm per minute maximum engraving or travel speed.
  • Solid steel gantry can tackle hardwoods at high speeds without flinching.
  • Stepper motors with square rails ensure smooth movement along the X, Y, and Z axes.
  • Use the handheld digital controller to move the spindle, adjust the speed, and go through your design.
  • Comes standard with software that allows you to set up almost any kind of design. (Details below.)
  • Upload your cut pattern to the table with a USB drive.
  • Rack and pinion mechanism holds up over long periods of heavy use and allows for more fluid and precise movement than a ball and screw mechanism.
  • 4 collets accept any standard tooling profiles with 1/8, 1/4, 3/8, and 1/2 inch bit sizes.
  • Includes 10 different tooling profiles.
  • Steel T-clamps hold the material down on the table to reduce vibrations and prevent errors.
  • Table is preplummed 4 vacuum zones, each with a separate valve and handle, ready to accept optional 7hp vacuum pump.
  • Extremely rigid steel structure reduces vibrations and helps the table stay accurate for years.
  • Dust shroud covers the spindle and vacuums out sawdust and wood chips while you’re cutting.
  • Covered by a 1-year parts warranty.
  • Lifetime technical support by phone: Call up Baileighs team of reps, all with hands-on machine experience, whenever you need help.

The WR-48 comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive.

Specifications
Item Number WR-84V
Shipping Weight 3000lbs
Actual Working Area 97 x 48 inch
Spindle 7.4hp
Z Axis Stroke 5.375 inch
Maximum Moving Speed (Inches Per Minute) 590
Maximum Engraving Speed (Inches Per Minute) 590
Reposition Accuracy 0.0019
Tool Diameters ER32
Power 220V Single Phase
Length 118 inch
Width 78 inch
Height 65 inch
Weight (lbs) 2500
Table Style T-Slot with Vacuum Option
Notes Table comes ready to accept an optional vacuum pump. Pump must be purchased separately.
AMP Draw 35 at full load
Shipping Dimensions (Inches) 124x86x70

specifications subject to change without notice.

WR-84V-ATC - CNC Router Table

WR-84V-ATC - CNC Router Table

This large CNC router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.

Features:

  • Large 4’ x 8’table.
  • Arrives pre-built with correct alignment. No complicated set-up process.
  • Comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
  • Runs on 220-volt 3-phase power.
  • Powerful 10hp spindle can tackle hard materials without flinching.
  • 7.5 kilowatt air-cooled spindle will stay accurate through years of production.
  • Variable spindle speed, from 3000 to 24,000 rpm.
  • Servo motors ensure smooth running at both fast and slow speeds.
  • High gantry is up and away from material, allowing you to see what it’s doing.
  • Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
  • Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
  • Pre-load up to 4 collets with your chosen profiles; the router will switch between them as programmed.
  • Powerful 7hp vacuum in the bed of the table holds the material in place during the cutting process.  

  • 4 vacuum zones allow you to turn on the valve only for the area where you’re working.
  • Arrange each zones vacuum seal into the shape of the material to provide well-distributed suction.
  • Dust shroud fits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
  • Fully-welded steel frame keeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
  • Covered by a 1-year parts warranty.
  • You can count on lifetime technical support by phone from Baileigh’s team of reps, all with hands-on product experience

The WR-84V-ATC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive

Specifications
Item Number WR-84V-ATC
Shipping Weight 4800lbs
Actual Working Area 96.5 x 50.5 inch
Speeds 7 (3,000 - 6,000 - 9,000 - 12,000 - 15,000 - 18,000 - 24,000 rpm)
Spindle Air Cooled
Z Axis Stroke 8 inch
Maximum Moving Speed (Inches Per Minute) 2362
Maximum Engraving Speed (Inches Per Minute) 984
Reposition Accuracy 0.0019
Tool Diameters 1/8 inch, 4mm, 6mm, and 12mm
Power 220V Three Phase
Length 132 inch
Width 83 inch
Height 70 inch
Horse Power 10
Weight (lbs) 4800
Table Style Vacuum
Notes Applicable Materials - Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
Shipping Dimensions (Inches) 144x82x81

specifications subject to change without notice

CNC Wood Router Table - WR-105V-ATC

CNC Wood Router Table - WR-105V-ATC

This CNC wood router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.

Features:

  • Large 5’ x 10’table.
  • Arrives pre-built with correct alignment. No complicated set-up process.
  • CNC wood router table comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
  • Runs on 220-volt 3-phasepower.
  • Powerful 12hp spindlecan tackle hard materials without flinching.
  • 9 kilowatt air-cooled spindlewill stay accurate through years of production.
  • Variable spindle speed, from 0 to 24,000 rpm.
  • Servo motorsensure smooth running at both fast and slow speeds.
  • High gantry is up and away from material, allowing you to see what it’s doing.
  • Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
  • Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
  • Pre-load up to 6 collets with your chosen profiles; the router will switch between them as programmed.
  • Powerful 7hp vacuum in the bed of the wood router machine holds the material in place during the cutting process.  

  • 4 vacuum zonesallow you to turn on the valve only for the area where you’re working.
  • Arrange each zone’s vacuum sealinto the shape of the material to provide well-distributed suction.
  • Dust shroudfits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
  • Fully-welded steel framekeeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
  • CNC wood router table covered by a 1-year parts warranty.
  • You can count on lifetime technical support by phone from Baileigh’s team of reps, all with hands-on product experience

The WR-105V-ATC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive.

 

Specifications
Item Number WR-105V-ATC
Shipping Weight 5500lbs
Actual Working Area 118 x 59 inch
Speeds Variable
Spindle Air Cooled
RPM 0-24000
Z Axis Stroke 8 inch
Maximum Moving Speed (Inches Per Minute) 2362
Maximum Engraving Speed (Inches Per Minute) 984
Reposition Accuracy 0.0015
Tool Diameters er32
Power 220V Three Phase
Length 140 inch
Width 110 inch
Height 89 inch
Horse Power 12
Weight (lbs) 3200
Table Style Vacuum
Notes applicable Materials - Acrylic, Copper, Aluminum, Wood, PVC, ABS, Insulation Plate, Bakelite Plate, Honeycomb Plate, Resin, Organic Board, Aluminum Composite Panel
Shipping Dimensions (Inches) 154x98x80 and 41x23x19

specifications subject to change without notice

BA9-1022102
ON SALE - DEM-0906-9X6 CNC DESKTOP ENGRAVER
OVERSTOCK SALE LIMITED QUANTITY AVAILABLE, WHILE SUPPLIES LAST
PRICE REFLECTS A $892.25 SAVINGS ON THIS ITEM
Mfg. item #: BA9-1022102
BAIDEM-0906
lease to own for as little as:$58 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$3,569.00

28
BA9-1022103
110V 17 X 17 CNC DESKTOP ENGRAVER, LASER READY (SOLD SEPARATELY) W/ SOFTWARE PACKAGE / MADE IN TAIWAN / WGT = 87 LBS / SHIPS UPS OR FEDEX (SKU 1022103)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-1022103
BAIDEM-1717
lease to own for as little as:$83 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$4,249.00

38
BA9-1022104
110V 27 X 20 CNC DESKTOP ENGRAVER, LASER READY (SOLD SEPARATELY) W/ SOFTWARE PACKAGE / MADE IN TAIWAN / WGT = 250 LBS / SHIPS LTL TRUCK FREIGHT (SKU 1022104)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-1022104
BAIDEM-2720
lease to own for as little as:$140 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$7,339.00

38
BA9-1019072
220V 1 PHASE 2 X 3 CNC ADVERTISING ROUTER TABLE, 4.2HP SPINDLE, AND SOFTWARE PACKAGE / MADE IN CHINA / WGT = 710 LBS / SHIPS LTL TRUCK FREIGHT (SKU 1019072)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-1019072
BAIWR-32
lease to own for as little as:$210 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$11,174.00

38
BA9-1019185
220V 1 PHASE CNC ROUTER 4X8 TABLE W/ T-SLOTS, 7.5HP SPINDLE (VACUUM READY, PUMP SOLD SEPARATELY) / MADE IN CHINA / WGT = 3000 LBS / SHIPS FLATBED, AIR-RIDE TRUCK (SKU 1019185)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-1019185
BAIWR-84V
lease to own for as little as:$454 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$24,173.00

38
BA9-1022028
220V 3¯ 4X8 CNC ROUTER TABLE, VACUUM TABLE W/ PUMP, 10HP SPINDLE, 4PC ATC, AND SOFTWARE PACKAGE / MADE IN CHINA / WGT = 4800 LBS / SHIPS FLATBED, AIR-RIDE TRUCK (SKU 1022028)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-1022028
BAIWR-84V-ATC
lease to own for as little as:$856 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$45,164.00

38
BA9-1018908
NEW - WR-105V-ATC; 220V 3¯ 5X10 CNC ROUTER TABLE, VACUUM TABLE, 12HP HSD SPINDLE, 6PC ATC, AND SOFTWARE PACKAGE (SKU1018908)
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR BEST BROTHER-IN-LAW PRICE & FREE SHIPPING
Mfg. item #: BA9-1018908
BAIWR-105V-ATC
lease to own for as little as:$1,169 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$63,344.00

38
DWR-6600H300
6MM CARBIDE ROTARY KNIFE 6MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-6600H300
BAIDWR-6600H300
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4635V090
90 DEGREE V CUTTER BIT 4MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-4635V090
BAIDWR-4635V090
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4635V060
60 DEGREE V CUTTER BIT 4MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-4635V060
BAIDWR-4635V060
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
1019918
30 DEGREE V CUTTER BIT 4MM SHANK ** CALL FOR PRICING
Mfg. item #: 1019918
BAIDWR-4635V030
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4400H150
4MM CARBIDE ROTARY KNIFE 4MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-4400H150
BAIDWR-4400H150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

1499
DWR-4400B150
4MM CARBIDE END MILL 4MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-4400B150
BAIDWR-4400B150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

1499
DWR-4250B120
2.5MM CARBIDE END MILL 4MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-4250B120
BAIDWR-4250B120
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4150E150
1.5R CARBIDE HALF CONICAL BALL NOSE ** CALL FOR PRICING
Mfg. item #: DWR-4150E150
BAIDWR-4150E150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4100G040
1MM CARBIDE TOOL 4MM SHANK ** CALL FOR PRICING
Mfg. item #: DWR-4100G040
BAIDWR-4100G040
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4100E150
1.0R CARBIDE HALF CONICAL BALL NOSE ** CALL FOR PRICING
Mfg. item #: DWR-4100E150
BAIDWR-4100E150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4100C150
1.0R CARBIDE CONICAL BALL NOSE CUTT ** CALL FOR PRICING
Mfg. item #: DWR-4100C150
BAIDWR-4100C150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4050E150
.5R CARBIDE HALF CONICAL BALL NOSE ** CALL FOR PRICING
Mfg. item #: DWR-4050E150
BAIDWR-4050E150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
DWR-4050C150
.5R CARBIDE CONICAL BALL NOSE CUTTE ** CALL FOR PRICING
Mfg. item #: DWR-4050C150
BAIDWR-4050C150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
1019909
.5R CARBIDE BALL NOSE CUTTER BIT 4M ** CALL FOR PRICING
Mfg. item #: 1019909
BAIDWR-4050A020
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

953
DWR-4025C150
.25R CARBIDE CONICAL BALL NOSE CUTT ** CALL FOR PRICING
Mfg. item #: DWR-4025C150
BAIDWR-4025C150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
1019908
.25R CARBIDE BALL NOSE CUTTER BIT 4 ** CALL FOR PRICING
Mfg. item #: 1019908
BAIDWR-4025A020
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
Copyright © 2024 Smith-Hamilton, Inc
0.072 231108 08:30