Technical Sales 1–800–458–3687

Baileigh Woodworking Dust Colectors

Bag Style Dust Collector DC-1300B Dust Extraction System DC-1650B  Dust Collector DC-2300B
DC-1300B
Bag Style Dust Collector
DC-1650B
Dust Extraction System
DC-2300B
Dust Collector 
 Cyclone Dust Collector DC-600C  Cyclone Dust Extractor DC-1450C  3HP Cyclone Dust Collector DC-2100C
DC-600C
Cyclone Dust Collector 
 DC-1450C
Cyclone Dust Extractor 
 DC-2100C
3HP Cyclone Dust Collector 

 

dust collector

Bag Style Dust Collector DC-1300B 

1002679 

Made in Taiwan

Keep your shop clean and comfortable with the DC-1300B bag style dust collector. This 1-1/2HP dust collector includes 30 micron upper and lower bags and is perfect for any shop or large or small. It gives superior air flow and improved service for long runs of hose or duct systems. This unit generates 1300CFM and runs on 110 volts, much less power that similar units, yet providing nearly the same performance as similar units with 2HP or more.

Specifications
Model DC-1300B
CFM 1300
Dust Collection Port 6 inch x 4 inch
Number of Outlets 2
Power 110V
Length 40 inch
Width 32 inch
Height 75 inch
Horse Power 1.5
Weight (lbs) 200

 

dust collector

Dust Extraction System DC-1650B 

1002685 

Made in Taiwan

The DC-1650B dust extraction system from Baileigh Industrial is a must for any woodworking shop. This 220 volt single phase 2hp dust collector features 30 micron upper and lower bags and produces 1650 CFM to eliminate the finest sawdust, dirt and debris with this dust extraction system. Four locking, swivel casters enable easy transport of your dust collector to anywhere it's needed.

Specifications
Model DC-1650B
CFM 1650
Dust Collection Port 6 inch x 4 inch
Number of Outlets 2
Power 220V Single Phase
Length 40 inch
Width 32 inch
Height 75 inch
Horse Power 2
Weight (lbs) 250

 

dust collector

Dust Collector DC-2300B 

1002692 

Made in Taiwan

Have a multitude of machines that need to be on one dust collection system?  If so the DC-2300B might just be your answer.  The DC-2300B dust collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines.

This 220 volt single phase dust collector uses a 3 hp motor to provide 2300 cfm.  The integrated all metal ducting provides great air flow that virtually eliminates all particles from the air into its 30 micron upper and lower bags.  There are three inlets and the size for the DC-2300B is 8 x 4 inch. Four swivel casters are also included and the DC-2300B has conveniently located handles allow for easy mobility.

 
Specifications
Model DC-2300B
CFM 2300
Dust Collection Port 8 inch x 4 inch
Number of Outlets 3
Power 220V Single Phase
Length 61 inch
Width 22 inch
Height 75 inch
Horse Power 3
Weight (lbs) 300

 

dust collector

Cyclone Dust Collector DC-600C 

1002693 

Made in Taiwan

The DC-600C cyclone dust collector from Baileigh Industrial is truly a unique product in the industry. This 600 CFM cyclone style dust collector is unlike anything on the market because of its small foot print and that it runs it 1.5hp motor on only 110 volts.  The voltage allows it to be used anywhere imaginable.

But just because it has a small foot print doesn’t mean that it is short on features.  The DC-600C has a 20 gallon collection drum capacity and two 6 x 4 inch inlets for hooking up multiple machines.  For optimal air purification the DC-600C cyclone dust collector has canister style filter with a manual clean out feature.  Four locking swivel casters round out this great package.

Specifications
Model DC-600C
CFM 600
Dust Collection Port 6 inch x 4 inch
Number of Outlets 2
Drum Capacity (Gallon) 20
Power 110V
Length 40 inch
Width 24 inch
Height 65 inch
Horse Power 1.5
Weight (lbs) 175

 

dust collector

Cyclone Dust Extractor DC-1450C 

1002681 

Made in Taiwan

Precision, performance, perfection, that is what Baileigh Industrial stands for, and that is just what you get with the DC-1450C cyclone dust extractor.   This compact 2HP cyclone dust collector is one of the most powerful in the industry.  Designed to have a small footprint, the DC-1450C is the perfect size for basement shops and shops with limited space. The unique impeller provides 1450 CFM more than enough to extract particles from multiple machines, in fact the DC-1450C has two are inlets that are 6 x 4 inch making the unit perfect for small central systems.  The DC-1450C cyclone dust extractor has an easily removable 28 gallon steel drum with a window on the side so you can see how much dust you are collecting. It even has castors from mobility.

Unlike other dust collection systems the DC-1450C is equipped with a 1 micron canister filter that prevents fine dust from escaping into the shop. The filter is made of a strong filter paper with at steel mesh body and has cleaning manually operated flapper inside to help with cleaning. This eliminates dust buildup that limits airflow. Other features are a remote start switch and casters for portability.

 
Specifications
Model DC-1450C
CFM 1450
Dust Collection Port 6 inch x 4 inch
Number of Outlets 2
Power 220V Single Phase
Length 41 inch
Width 27 inch
Height 70 inch
Horse Power 2
Weight (lbs) 261

 

dust collector

3HP Cyclone Dust Collector DC-2100C 

1002687 

Made in Taiwan

The DC-2100C 3hp cyclone dust collector was designed to be the best on the market with no part of the design process over looked.  The 220 volt single phase 3 hp motor is designed to run all day long and stay cooler than others in the industry.  The DC-2100C also uses a unique style fan to produce a whopping 2111 CFM, more than enough air flow to overcome some of the resistance that is brought on by the piping from machine to collector.  It even has remote start and shut off for convenience.

The DC-2100C has a 63 gallon capacity drum, tis collector is truly designed to be used and abused.  But when it is time to empty, it has quick release lever that allows the drum to slide right out.  It also has casters for portability.

The DC-2100C 3HP cyclone dust collector has a one micron canister to ensure that fine dust doesnt get back into the shop.  Cleaning the canister is fast with a manual turn crank that allows the dust to call into a plastic bag for easy removal and disposal. 

 
Specifications
Model DC-2100C
CFM 2111
Dust Collection Port 8 inch x 4 inch
Number of Outlets 3
Power 220V Single Phase
Dimensions 69 x 44 x 63 inch
Horse Power 3
Weight (lbs) 385

 

JET CYCLONE SEPARATOR JET CYCLONE SEPARATOR WITH BIN
JET Cyclonic Separator JET Cyclonic Separator with bin

JET Cyclonic Separator

The JET Cyclonic Separator maximizes dust collection efficiency by maintaining the air flow of a dust collection system by deflecting chips and large debris inline freeing up dust collection filters to trap fine particles. The red bullet separator deflects chips down ward in to a bin, reducing damage and obstruction to the dust collection hoses, impellors and filters.The JET Cyclonic Separator can be placed on the lid of almost any size container. Bolt pattern is included. Bring cyclonic power and efficiency inline.

Features:

  • For best performance, select cutterhead and cutting speed to produce chips 2” or smaller
  • Clear Polycarbonate material allows for viewing of separation
  • Extends the life of the filter and impellers by extracting the larger debris before entering the dust collector
  • Includes: (2) 4 inch Wire Hose Clamps
  • Maintain the air flow of a dust collection system by deflecting chips and large debris inline freeing up dust collection filters to trap fine particles.
  • The JET Cyclonic Separator can be placed on the lid of almost any size container. Bolt pattern is included.
  • The red bullet separator deflects chips to a bin, reducing damage and obstruction to the dust collection hoses, impellors, and filters

Specifications

  • Footprint (L x W/In.) 15.75 x 8.7     
  • 1-Hose Connection Diameter (In.) 4    
  • Overall Dimensions (L x W x H) (In.) 15.75 x 8.7 x 11.1

JET Cyclonic Separator with Bin

The JET Cyclonic Separator maximizes dust collection efficiency by maintaining the air flow of a dust collection system by deflecting chips and large debris inline freeing up dust collection filters to trap fine particles. The red bullet separator deflects chips down ward in to a bin, reducing damage and obstruction to the dust collection hoses, impellors and filters.The JET Cyclonic Separator can be purchased with a 30 gallon steel bin that includes handles and 360* casters. The JET Cyclonic Separator also can be placed on the lid of almost any size container. Bolt pattern is included. Bring cyclonic power and efficiency inline.

Features:

  • For best performance, select cutterhead and cutting speed to produce chips 2” or smaller
  • Clamping metal lid with gaskets prevents loss of suction.
  • Clear Polycarbonate material allows for viewing of separation
  • Durable metal 30-gallon collection bin with window for viewing the fill capacity.
  • Extends the life of the filter and impellers by extracting the larger debris before entering the dust collector
  • Includes: (2) 4 inch Wire Hose Clamps
  • Maintain the air flow of a dust collection system by deflecting chips and large debris inline freeing up dust collection filters to trap fine particles.
  • Swivel Casters and handle on bin make it easy to move around the shop
  • The red bullet separator deflects chips to a bin, reducing damage and obstruction to the dust collection hoses, impellors, and filters

Specifications

  • Collection Drum Capacity (gal.) 20    
  • Footprint (L x W/In.) 20.9 x 16.6     
  • 1-Hose Connection Diameter (In.) 4    
  • Overall Dimensions (L x W x H) (In.) 20.9 x 16.6 x 30.5
Jet Cyclonic Separator Models and Accessories
717600 JET Cyclonic Separator
717650 JET Cyclonic Separator with bin
JW1000 Reducer, 4 in to 2-1/4 in OD/2 in ID for JET dust collectors
JW1022 4 in Hose Clamp Dust Collection Accessory
JW1031 JW1031 VCUUM/Dust Collector Hose
JW1032 Dust Collection Hose for Dust Collectors, 4 in dia x 20 ft L
JW1034 Clear Dust Collection Hose, 4 in x 10 ft
JW1043 4 in Connector Sleeve Dust Collection Accessory
JW1317 4 in Wire Clamp Dust Collection Accessory

 

BA9-1002679
DC-1300B; 1-1/2HP 110V BAG STYLE DUST COLLECTOR, 1300 CFM, 30 MICRON UPPER AND LOWER BAGS **SHIPS LTL FREIGHT TRUCK, WGT = 150 LBS & MADE IN TAIWAN
Mfg. item #: BA9-1002679
BAIDC-1300B
See freight charges if any at checkout. ALWAYS FREE Residential and Liftgate when Requested.1055
$761.00

24
BA9-1002685
DC-1650B; 2HP 220V 1PH BAG STYLE DUST COLLECTOR, 1650 CFM, 30 MICRON UPPER AND LOWER BAGS **SHIPS LTL FREIGHT TURCK, WGT = 150 LBS & MADE IN TAIWAN

CALL 800-458-3687 OR ADD TO CART FOR THE BEST BROTHER-IN-LAW DEAL ON THIS BAILEIGH ITEM ALSO FREE LTL FREIGHT,& FREE RESIDENTIAL, LIFTGATE AND DELIVERY APPOITMENT SERVICES AND NO HANDLING FEE
Mfg. item #: BA9-1002685
BAIDC-1650B
See freight charges if any at checkout. ALWAYS FREE Residential and Liftgate when Requested.1055
$855.99

24
BA9-1002692
DC-2300B; 3HP 220V 1PH BAG STYLE DUST COLLECTOR, 2300 CFM, 30 MICRON UPPER AND LOWER BAGS **SHIPS LTL FREIGHT TURCK, WGT = 230 LBS & MADE IN TAIWAN

CALL 800-458-3687 OR ADD TO CART FOR THE BEST BROTHER-IN-LAW DEAL ON THIS BAILEIGH ITEM ALSO FREE LTL FREIGHT,& FREE RESIDENTIAL, LIFTGATE AND DELIVERY APPOITMENT SERVICES AND NO HANDLING FEE
Mfg. item #: BA9-1002692
BAIDC-2300B
See freight charges if any at checkout. ALWAYS FREE Residential and Liftgate when Requested.1056
$1,142.00

24
BA9-1002693
DC-600C; 1-1/2HP 110V CYCLONE STYLE DUST COLLECTOR, 604 CFM, 20 GALLON DRUM, AND 6 X 4 X 2 INLET **SHIPS LTL FREIGHT TRUCK, WGT = 160 LBS & MADE IN TAIWAN
Mfg. item #: BA9-1002693
BAIDC-600C
Free freight for Jet-Powermatic-Wilton orders over $1,500. ALWAYS FREE Residential and Liftgate when Requested.1057
$1,963.64

24
BA9-1002681
DC-1450C; 2HP 220V 1PH CYCLONE STYLE DUST COLLECTOR, 1450 CFM, 28 GALLON DRUM **SHIPS LTL FREIGHT TURCK, WGT = 223 LBS & MADE IN TAIWAN

FREE LTL FREIGHT,& FREE RESIDENTIAL, LIFTGATE AND DELIVERY APPOITMENT SERVICES AND NO HANDLING CHARGES
Mfg. item #: BA9-1002681
BAIDC-1450C
Free freight for Jet-Powermatic-Wilton orders over $1,500. ALWAYS FREE Residential and Liftgate when Requested.1057
$2,265.00

24
BA9-1002687
DC-2100C; 3HP 220V 1PH CYCLONE STYLE DUST COLLECTOR, 2111 CFM, 63 GALLON DRUM **SHIPS LTL FREIGHT TURCK, WGT = 330 LBS & MADE IN TAIWAN

FREE LTL FREIGHT,& FREE RESIDENTIAL, LIFTGATE AND DELIVERY APPOITMENT SERVICES AND NO HANDLING CHARGES
Mfg. item #: BA9-1002687
BAIDC-2100C
lease to own for as little as:$54 per month!
Free freight for Jet-Powermatic-Wilton orders over $1,500. ALWAYS FREE Residential and Liftgate when Requested.1057
$2,687.00

24
JT9-717600
OBSOLETE - CYCLONIC SEPARATOR (SEPARATOR ONLY)
THIS ITEM IS NOW OBSOLETE AND NO LONGER AVAILABLE, CALL 800-458-3687 FOR ADDITIONAL INFORMATION
Mfg. item #: JT9-717600
WMH717600
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment1019
Call for Price

56
JT9-717650
OBSOLETE - CYCLONIC SEPARATOR AND BIN
THIS ITEM IS NOW OBSOLETE AND NO LONGER AVAILABLE, CALL 800-458-3687 FOR ADDITIONAL INFORMATION
Mfg. item #: JT9-717650
WMH717650
Factory Direct Ship - Free Shipping ONLY when added to JET, Powermatic or Baileigh Equipment8
Call for Price

56
JW1000
4 TO 2-1/4OD - 2ID REDUCER ** PRICED AS & SOLD IN PACKS OF 10 EA
Mfg. item #: JW1000
WMHJW1000
Order in packs of 10
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$99.90

147
JW1022
4 HOSE CLAMP ** PRICED AS & SOLD IN PACKS OF 10 EA
Mfg. item #: JW1022
WMHJW1022
Order in packs of 10
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$69.90

147
JT9-JW1031
4 X 10 HOSE, MADE IN U.S.A., WGT = 5.1 LBS
Mfg. item #: JT9-JW1031
WMHJW1031
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$37.99

7
JT9-JW1032
4 X 20 HOSE, MADE IN U.S.A., WGT = 8.35 LBS
Mfg. item #: JT9-JW1032
WMHJW1032
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$53.99

7
JT9-JW1034
4 X 10 CLEAR HOSE, MADE IN U.S.A., WGT = 4.85 LBS
Mfg. item #: JT9-JW1034
WMHJW1034
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
NEW ITEM
$56.99

7
JW1043
4 CONNECTOR SLEEVE ** PRICED AS & SOLD IN PACKS OF 4 EA
Mfg. item #: JW1043
WMHJW1043
Order in packs of 4
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$43.96

147
JW1317
4 WIRE CLAMP ** PRICED AS & SOLD IN PACKS OF 10 EA
Mfg. item #: JW1317
WMHJW1317
Order in packs of 10
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$69.90

147
Copyright © 2024 Smith-Hamilton, Inc
0.014 240510 06:52