Technical Sales 1–800–458–3687

Baileigh Power Hammers

PNEUMATIC POWER HAMMER, 28 THROAT DEPTH, 16 GUAGE MILD STEEL CAPACITY, INCLUDES STARTER DIE SET 110V POWER HAMMER, RECIPRICATING TYPE, COMES WITH STAND AND FULLY GUARDED. INCLUDES MINI SHRINK DIES 110V VARIABLE SPEED POWER HAMMER, RECIPRICATING TYPE, COMES WITH STAND AND FULLY GUARDED
PH-28A Pneumatic
Power Hammer, 28 inch, 16 Ga
PH-19 Power Hammer,
19 inch, 16 Ga
PH-19-VS Variable Speed Power Hammer, 19 inch, 16 Ga
220V 1PH VARIALBLE SPEED POWER HAMMER. 16 GAUGE MILD STEEL CAPACITY. 28 THROAT DEPTH 220V 1PHASE MULTI-FUNCTION POWER HAMMER. 16 GAUGE MILD STEEL CAPACITY. 19 THROAT DEPTH 220V 3PH MULTI-FUNCTION POWER HAMMER. 1/8 GAUGE MILD STEEL CAPACITY. 37 THROAT DEPTH
PH-28HD-VS Variable Speed Power Hammer 28 inch, 16 Ga MH-19 Multi Function Power Hammer 19 inch, 16 Ga MH-37HD Multi Function Power Hammer 37 inch, 1/8 Ga

 

Models
PH-28A Pneumatic power hammer
PH-19 Reciprocating hammer
PH-19-VS Variable speed reciprocating hammer
PH-28HD-VS Variable speed power hammer
MH-19 Power hammer
MH-37HD Power hammer
 Accessories
MH19-ENGLISH WHEEL Complete English Wheel Option for MH-19
PHD-THDS-V4 Thumbnail Shrink Dies (2) 3.0 in dia.
PHD-MTHDS-V4 Thumbnail Shrink Dies (2) 2.0 in dia.
PHD-BDS-0250 1/4 in Beading Dies (2)
PHD-ST-TOP-FLAT-2.0 Master Flat Top Die, 2.0 in dia.
PHD-ST-TOP-FLAT Master Flat Top Die, 3.0 in dia.
PHD-ST-TOP-RUB-80 Rubber Top Die, 80 Durometer, 3.0 in dia.
PHD-ST-BTM-0150 1.5 Radius Lower Die, 2.0 in dia.
PHD-ST-BTM-0200 2.0 Radius Lower Die, 2.0 in dia.
PHD-ST-BTM-0300 3.0 Radius Lower Die, 2.0 in dia.
PHD-ST-BTM-0600 6.0 Radius Lower Die, 3.0 in dia.
PHD-ST-BTM-0800 8.0 Radius Lower Die, 3.0 in dia.
PHD-ST-BTM-1200 12.0 Radius Lower Die, 3.0 in dia.
PHD-ST-BTM-2400 24.0 Radius Lower Die, 3.0 in dia.
PHD-ST-BTM-3600 36.0 Radius Lower Die, 3.0 in dia.
PHD-ST-BTM-6000R-1000F 1.0F x 6.0R Lower Planishing, 3.0 in dia.
PHD-ST-BTM-LIN-0500 .5 Linear Lower Stretch Die, 3.0 in dia.
PHD-ST-MEC-S-1 Mechanical Stretch Dies (2) 1 in x 2 in
PHD-SH-MEC-S-1 Mechanical Shrink Dies (2) 1 in x 2 in
PHD-UTHS-0500 Univ. Tool Holders (2) .5 in Opening, 2.0 in dia.
PHD-UTHS-0750-SQ Univ. Tool Holders (2) .75 in Opening, 2.0 in dia.
Tooling
PHD-ST-BT{00 1.5 RADIUS LOWER DIE, 2.0DIA.
PHD-ST-BT{01 2.0 RADIUS LOWER DIE, 2.0DIA.
PHD-ST-BT{02 3.0 RADIUS LOWER DIE, 2.0DIA.
PHD-ST-BT{03 6.0 RADIUS LOWER DIE, 3.0DIA.
PHD-ST-BT{04 8.0 RADIUS LOWER DIE, 3.0DIA.
PHD-ST-BT{05 12.0 RADIUS LOWER DIE, 3.0DIA.
PHD-ST-BT{06 24.0 RADIUS LOWER DIE, 3.0DIA.
PHD-ST-BT{07 36.0 RADIUS LOWER DIE, 3.0DIA.
PHD-ST-BT{08 1.0F X 6.0R LOWER PLANISHING, 3.0DIA.
PHD-ST-TO{00 P-FLAT}Master Flat Top Die, 3.0"dia
PHD-ST-TO{02 RUBBER TOP DIE, 80 DUROMETER, 3.0DIA.
PHD-UTHS-{00 UNIV. TOOL HOLDERS (2) .5 OPENING, 2.0DIA.
PHD-ST-BT{09 .5 LINEAR LOWER STRETCH DIE, 3.0DIA.
PHD-BDS-0250 1/4" Beading Dies (2)
PHD-SH-ME{00 MECHANICAL SHRINK DIES (2) 1 X 2
PHD-ST-ME{00 MECHANICAL STRETCH DIES (2) 1 X 2
PHD-THDS-V4 Thumbnail Shrink Dies (2) 3.0"dia.

 

Pneumatic Power Hammer PH-28A

Pneumatic Power Hammer (PH-28A)

Shrink and stretch with air! The compact, USA-made PH-28A hits much harder than traditional pneumatic power hammers. You can even use a thumbnail shrinker die (included).

Features:

  • 28 inch throat can handle larger panels than the MH-19 can.
  • Stretches, shrinks, and planishes up to 16 gauge mild steel.
  • Variable speed from 0 to 1,000 beats per minute.
  • Runs on 120 psi compressed air.
  • Regulator on the side lets you control the airflow.
  • Air-powered system is much quieter than a mechanical machine.
  • Foot pedal operation keeps your hands free to move the material.
  • Quick-release handle on the front allows you lift the tool up and take the material out.
  • Comes with 5 tooling sets:
    • 2.5 inch thumbnail shrinking dies.
    • 2.5 inch master flat top die.
    • 1 inch linear stretch die.
    • 12, 24, and 36 inch radius dies.
  • Oiler system on the side can deliver oil directly to the tool for convenient maintenance.
  • You can add an optional planishing hammer attachment to the side to create an all-in-one machine.
  • Small footprint is perfect for home shops or production facilities.
  • Heavy 1/2 inch steel plate frame avoids flex and ensures that the machine’s force fully transfers to the material for high-quality results.
  • Covered by a 1-year parts warranty.
  • This power hammer comes with lifetime technical support by phone from our team of experienced metalworkers.

Recommended for:Startup automotive shops, metal shapers working on airplane parts, and metal artists.

Specifications
Item Number PH-28A
Country of Manufacture United States
CFM 15 at 120psi
Speed 0 - 1000 beats / min (Variable)
Mild Steel Capacity 16 ga.
Tooling Height Adjustment 1.5 inch
Included Tooling 2 inch Thumbnail Shrinking Dies, 2.5 inch Master Flat Top Die, 1 inch Linear Stretch Die, 3 x 36 inch Radius Die, 3 x 24 inch Radius Die, 3 x 12 inch Radius Die
Throat Depth 28 inch
Aluminum Capacity 14 ga.
Power 80 - 120 psi
Shipping Weight 1000lbs
Optional Tooling Some applications may require optional tooling. Please contact a Technical Sales Specialist at Baileigh Industrial with specific application details.
Special Notes For best results, it is recommended to have a constant air supply of 120 psi
Shipping Dimensions (Inches) 60x44x77

 

Reciprocating Hammer PH-19
Reciprocating Hammer PH-19
Comes with Stand and Mini Shrink Dies (1 set)

Reciprocating Hammer PH-19

Made in United States

Baileigh industrial is making metal forming easier and more available to the masses with the economical PH-19 reciprocating power hammer.  The Baileigh Industrial PH-19 power hammer would be a great addition to any shop that has to form metal fast.  The PH-19 is considered to be the little brother to the Baileigh Industrial MH-19 multi hammer.  They took what they learned from the best hammer on the market, the MH-19 multi hammer, and created what they consider to be the best reciprocating hammer period.  The PH-19 can do many of the same functions as the MH-19, shrink, stretch, dome, edge turn, bead, offset, but at a price that fits any budget.  What is even better is that the PH-19 also accepts a lot of the readily available MH-19 tooling.

The PH-19 uses a 110V motor to produce 1700 beats per minute and enough force to shape 16 gauge mild steel.  It also has a 19 inch deep throat to allow for even the most unique shaping designs.  A tooling quick release handle allows the operator to start working in the middle of the panel with keeping the working pressure constant.  A quick release bottom tooling holder makes life on the operator easy by making tooling changes a breeze.

Contact a customer service representative for more information on the PH-19 or any of the other great Baileigh Industrial products.
 
SPecifications
Model PH-19
Speed 0 - 1700 beats / minute
Mild Steel Capacity 16 ga.
Tooling Height Adjustment 5 inch
Throat Depth 19 inch
Capacity (Mild Steel) 16 ga.
Aluminum Capacity 12 ga.
Power 110V
Shipping Weight 1,000 lbs.
Shipping Dimensions 60 x 48 x 84 inch

 

Reciprocating Hammer PH-19VS

Power Hammer PH-19VS

Made in United States

Need precise speed control for delicate jobs? Thats why we added an inverter drive to our PH-19 and created a variable-speed power hammer that more shops can afford.

Features:
  • Delivers enough force to shape 16 gauge mild steel.
  • 19 inch throat allows you get deep into panels and covers most metal shaping projects.
  • Adjustable speed from 0 to 1,700 to beats per minute.
  • You can control the speed either by foot pedal or the control box on the side of the machine.
  • Plug it into any 110-volt power outlet.
  • Quick-release tooling handle lets you start in the middle of a panel while keeping the pressure constant.
  • Tooling changes take just a few seconds and dont require any hand tools.
  • Comes standard with a mini thumbnail shrinker die set.
  • Wide variety of tooling available for shrinking, stretching, planishing, and drastic metal shaping.
  • Heavy 1/2 inch plate steel frame and rigid steel stand enable this power hammer to hit with full force and prevent deflection.
  • Small footprint saves space in smaller shops.
  • Wheels on the base make it easy to move out of the way.
  • We keep tooling and replacement parts in stock for fast deliveries.
  • Covered by a 1-year parts warranty.
  • Our team of experienced metalworkers is on hand to provide lifetime technical support by phone.
Recommended for: Small automotive and airplane shops with limited space and/or budgets, as well as schools and educational institutions.
 
Specifications
Model PH-19-VS
Country of Manufacture United States
Speed 0 - 1700 beats / minute
Tooling Height Adjustment 5 inch
Throat Depth 19 inch
Capacity (Mild Steel) 16 ga.
Aluminum Capacity 12 ga.
Power 110V
Shipping Weight 1,000 lbs.
Shipping Dimensions 60 x 48 x 84 inch

 

PH-28HD-VS Power Hammer

PH-28HD-VS Power Hammer

The PH-28HD-VS power hammer can hit harder and move metal faster than most hammers its size. This USA-made machine lets you shape multiple sheets at once, then planish them out.

Features:
  • 28 inch throat with deep cutout designed for fenders.
  • Large 14 gauge mild steel capacity.
  • Variable speed from 0 to 1,000 beats per minute.
  • 3 hp motor runs on 220-volt single-phase power.
  • Developed over 20 years of research to find what’s most important to metal shapers.
  • Hits up to 75 percent harder than its predecessor, the MH-19.
  • Incorporates Dupont linkage (also used on our massive MH-37HD) to shape heavier gauges of steel.
  • Quick-release design lets you get the tooling out of the way to add or remove your panel.
  • Switch between 3 fixed stroke settings on the fly: 1/4, 1/2, 3/4 inch.
  • Adjust the lower ram up or down via a large acme thread, so you won’t need to shim if different tool thicknesses are required.
  • Simple, proven mechanism uses easily replaceable, off-the-shelf die springs.
  • Floating chain and sprocket setup eliminates the leather strap commonly found on legacy hammers.
  • You can add an optional planishing hammer attachment to the side of this power hammer.
  • Rigid 1 inch plate steel frame ensures high-quality, controllable shaping force and won’t buckle under the heavy hits.
  • Portable pedestal raises the working height and allows better visibility of the hit mark.
  • Covered by a 1-year parts warranty.
  • Our team of experienced metal shapers is here to provide lifetime technical support by phone.

Recommended for: Automotive shops that need to shape metal quickly and often work on fenders.

 

Specifications
Item Number PH-28HD-VS
Country of Manufacture United States
Motor Hp 3
Speed 0 - 1000 beats / min (Variable)
Mild Steel Capacity 14 ga.
Tooling Height Adjustment 2 inch
Throat Depth 28 inch
Working Height 62.5 inch
Aluminum Capacity 10 ga.
Length Of Stroke Adj 3 Fixed Lengths: 1/4, 1/2, 3/4 inch
Power 220V / 1-phase
Shipping Weight 2000lbs
Optional Tooling Some applications may require optional tooling. Please contact a Technical Sales Specialist at Baileigh Industrial with specific application details.
Special Notes Does Not Include Tooling, Uses Same Tooling as MH-19. Please consult a Baileigh Rep. for proper tooling.
Shipping Dimensions (Inches) 60x50x98

 

Power Hammer MH-19

Power Hammer MH-19

Made in United States

See what Greenstone from Cutworm Specialties has to say about the Baileigh Power Hammer MH-19 

If you are into metal forming and shaping there is currently only one machine that you should have in your shop.  That machine is the MH-19 power hammer from Baileigh Industrial.  The MH-19 is truly a do it all machine.  The MH in MH-19 stands for multi-hammer because if does multiple things, but unlike other combination machines that you see, the MH-19 does them all well.  There truly is nothing that this machine cant do. The MH-19 power hammer is a 220 volt single phase machine has the ability to transform itself from a rigid style like a Pullmax style machine, to a spring slapping style like a Yoder style machine, or even a very heavy duty English wheel.

When operating in the rigid mode, there is no give between the die heads. Used for short stroke shaping, flanging. Tooling designs and profiles are endless, but some of the options are mechanical shrinking, stretching dies, flanging dies, and louvers.

The spring setup with Throw the die causing a dead blow hammering effect.  When in this mode the total amount of pressure applied when the dies hit the metal is increase exponentially. This mode would be used for aggressive shrinking and planishing, many different tooling profiles can be used.

An optional English wheel kit can be purchased for the MH-19 power hammer to even bring more versatility in the machine.  The quality of the English wheel kit is second to none and is very rigid, which is important when finishing metal.

The MH-19 uses an inverter to obtain various speeds for operation.  Speeds range from 0 to 1500 beats per minute, speed is adjusted one of two ways; either with the operator controlled foot pedal or on the operator panel where he/she can lock in their speed.  Another key feature of the MH-19 power hammer is on the fly stroke adjustments.  These stroke adjustments range from 0175 to .550 inch.

Other things that are included are, quick release adjustment handles, quick change tooling system, tooling racks, one set of thumbnail shrink dies, one flat top, and one lower planishing die.   Contact a representative for more information.

Patent # 7,810,368

Specifications
Speed 0 - 1500 beats / minute
Mild Steel Capacity 16 ga.
Tooling Height Adjustment 2 inch
Throat Depth 19 inch
Capacity (Mild Steel) 16 ga.
Aluminum Capacity 12 ga.
Length Of Stroke Adj .177 - .550 inch
Power 220V / 1-phase
Shipping Weight 1,600 lbs.
Shipping Dimensions 60 x 60 x 84 inch

 

MH-37HD Power Hammer

MH-37HD Power Hammer

Our largest power hammer, the MH-37HD can shape 4 or 5 pieces of metal at once for fast production of multiple parts. A 1-1/2 inch thick steel plate frame keeps the machine rigid.

Features:
  • 37 inch throat depth can handle large or pre-bent panels.
  • 0 to 1,500 beats per minute (inverter-driven variable speed).
  • Adjust the speed via the foot pedal or operator panel.
  • On-the-fly stroke adjustments range from 0.1 to 0.750 inch.
  • 1/8 inch steel and 1/4 inch soft aluminum shrinking capacity.
  • Runs on 220-volt 3-phase power.
  • Switch between rigid Pullmax-style mode and spring-slapping Yoder style mode, depending on your project.
  • Use rigid mode for short stroke shaping and flanging. No give between die heads.
  • Non-rigid mode creates a dead blow hammering effect, suitable for aggressive shrinking and planishing.
  • Tooling changes take only a few seconds. Release the die, pull out the pin, switch, and replace the pin.
  • Includes 7 die sets:
    • Large shrink die set.
    • Flat top master die.
    • Linear stretch die.
    • 12, 24, and 36 inch radius dies.
    • 1 x 6 inch planish die.
  • Other large radius dies and shrinking and stretching dies are available.
  • Convenient maintenance with grease zerks, exposed and easy to reach.
  • Main hammering springs are replaceable, so the power hammer lasts longer.
  • Comes standard with a work light.
  • Massive steel plate frame prevents deflection and allows this power hammer to deliver maximum force for fast, high-quality shaping.
  • Covered by a 1-year parts warranty.
  • We offer lifetime technical support by phone, provided by a team of experienced metalworkers.

Recommended for: Large automotive shops making off-road vehicles.

Specifications
Item Number MH-37HD
Country of Manufacture United States
Motor Hp 5 HP
Speed 0 - 1500 beats / minute
Mild Steel Capacity 1/8 inch
Tooling Height Adjustment 2 inch
Throat Depth 37 inch
Capacity (Mild Steel) 0.125 inch
Aluminum Capacity .250 inch Soft
Length Of Stroke Adj 0.1 - 0.75 inch
Power 220V / 3-phase
Shipping Weight 6000lbs
Shipping Dimensions (Inches) 79x60x100

 

No additional accessories

PH-28A
PNEUMATIC POWER HAMMER, 28 THROAT DEPTH, 16 GAUGE MILD STEEL CAPACITY, INCLUDES STARTER DIE SET
Mfg. item #: PH-28A
BAIPH-28A
lease to own for as little as:$126 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,303.68

26
PH-19
110V POWER HAMMER, RECIPROCATING TYPE, COMES WITH STAND AND FULLY GUARDED. INCLUDES MINI SHRINK DIES
Mfg. item #: PH-19
BAIPH-19
lease to own for as little as:$157 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$7,835.67

26
PH-19-VS
110V VARIABLE SPEED POWER HAMMER, RECIPROCATING TYPE, COMES WITH STAND AND FULLY GUARDED
Mfg. item #: PH-19-VS
BAIPH-19-VS
lease to own for as little as:$184 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9,223.29

26
PH-28HD-VS
220V 1PH VARIABLE SPEED POWER HAMMER. 16 GAUGE MILD STEEL CAPACITY. 28 THROAT DEPTH
Mfg. item #: PH-28HD-VS
BAIPH-28HD-VS
lease to own for as little as:$319 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$15,942.54

26
MH-19
220V 1PHASE MULTI-FUNCTION POWER HAMMER. 16 GAUGE MILD STEEL CAPACITY. 19 THROAT DEPTH
Mfg. item #: MH-19
BAIMH-19
lease to own for as little as:$444 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$22,213.84

26
MH-37HD
SALE - 220V 3PH MULTI-FUNCTION POWER HAMMER. 1/8 GAUGE MILD STEEL CAPACITY. 37 THROAT DEPTH
BROTHER-IN-LAW SPECIAL - PRICE REFLECTS OVERSTOCK LIMITED QUANTITY OFFER, CALL NOW TO CHECK AVAILABILITY
Mfg. item #: MH-37HD
BAIMH-37HD
lease to own for as little as:$1,047 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$52,360.78

26
MH19-ENGLISH WH
COMPLETE ENGLISH WHEEL OPTION FOR MH-19
Mfg. item #: MH19-ENGLISH WH
BAIMH19-ENGL{00
FREE shipping when ordered with a machine from this manufacturer.20
$1,034.05

662
PHD-THDS-V4
LRG SIZE THUMBNAIL SHRINK DIE SET (TOP AND BOTTOM- MH-19 ONLY)
Mfg. item #: PHD-THDS-V4
BAIPHD-THDS-V4
FREE shipping when ordered with a machine from this manufacturer.20
$944.00

662
PHD-MTHDS-V4
THUMBNAIL SHRINK DIES (2) 2.0DIA.
Mfg. item #: PHD-MTHDS-V4
BAIPHD-MTHDS-V4
Call for freight quote on this item or we will confirm freight charges before shipping.1
$887.04

3351
PHD-BDS-0250
1/4 BEADING DIE SET TOP & BOTTOM
Mfg. item #: PHD-BDS-0250
BAIPHD-BDS-0250
FREE shipping when ordered with a machine from this manufacturer.20
$438.00

662
PHD-ST-TOP-FLAT
MASTER FLAT TOP DIE, 2.0DIA.
Mfg. item #: PHD-ST-TOP-FLAT
BAIPHD-ST-TO{01
Call for freight quote on this item or we will confirm freight charges before shipping.1
$195.00

3351
PHD-ST-TOP-FLAT
MASTER FLAT TOP DIE, 3.0DIA.
Mfg. item #: PHD-ST-TOP-FLAT
BAIPHD-ST-TO{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$195.00

3351
PHD-ST-TOP-RUB-
RUBBER TOP DIE 80 DUROMETER 3.0 DIA
Mfg. item #: PHD-ST-TOP-RUB-
BAIPHD-ST-TO{02
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0150
1.5 RADIUS LOWER DIE 2.0 DIA
Mfg. item #: PHD-ST-BTM-0150
BAIPHD-ST-BT{00
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0200
2.0 RADIUS LOWER DIE 2.0 DIA
Mfg. item #: PHD-ST-BTM-0200
BAIPHD-ST-BT{01
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0300
3.0 RADIUS LOWER DIE 2.0 DIA
Mfg. item #: PHD-ST-BTM-0300
BAIPHD-ST-BT{02
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0600
6.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-0600
BAIPHD-ST-BT{03
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0800
8.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-0800
BAIPHD-ST-BT{04
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-1200
12.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-1200
BAIPHD-ST-BT{05
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-2400
24.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-2400
BAIPHD-ST-BT{06
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-3600
36.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-3600
BAIPHD-ST-BT{07
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-6000
1.0 FLAT X 6.0R LOWER PLANISH DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-6000
BAIPHD-ST-BT{08
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-LIN-
.5 LINEAR LOWER STRETCH DIE, 3.0DIA.
Mfg. item #: PHD-ST-BTM-LIN-
BAIPHD-ST-BT{09
Call for freight quote on this item or we will confirm freight charges before shipping.1
$379.51

3351
PHD-ST-MEC-S-1
MECHANICAL STRETCH DIES (2) 1 X 2
Mfg. item #: PHD-ST-MEC-S-1
BAIPHD-ST-ME{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$569.75

3351
PHD-SH-MEC-S-1
MECHANICAL SHRINK DIES (2) 1 X 2
Mfg. item #: PHD-SH-MEC-S-1
BAIPHD-SH-ME{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$569.75

3351
PHD-UTHS-0500
UNIVERSAL TOOL HOLDERS FOR 1/2 THICK BAR STOCK (2PCS SET FOR CUSTOM PROFILES)
Mfg. item #: PHD-UTHS-0500
BAIPHD-UTHS-{00
FREE shipping when ordered with a machine from this manufacturer.20
$389.00

662
PHD-UTHS-0750-S
UNIVERSAL TOOL HOLDER, 3/4 SQUARE OPENING, SET OF TWO
Mfg. item #: PHD-UTHS-0750-S
BAIPHD-UTHS-{01
FREE shipping when ordered with a machine from this manufacturer.20
$389.00

662
PHD-ST-BTM-0150
1.5 RADIUS LOWER DIE 2.0 DIA
Mfg. item #: PHD-ST-BTM-0150
BAIPHD-ST-BT{00
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0200
2.0 RADIUS LOWER DIE 2.0 DIA
Mfg. item #: PHD-ST-BTM-0200
BAIPHD-ST-BT{01
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0300
3.0 RADIUS LOWER DIE 2.0 DIA
Mfg. item #: PHD-ST-BTM-0300
BAIPHD-ST-BT{02
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0600
6.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-0600
BAIPHD-ST-BT{03
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-0800
8.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-0800
BAIPHD-ST-BT{04
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-1200
12.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-1200
BAIPHD-ST-BT{05
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-2400
24.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-2400
BAIPHD-ST-BT{06
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-3600
36.0 RADIUS LOWER DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-3600
BAIPHD-ST-BT{07
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-BTM-6000
1.0 FLAT X 6.0R LOWER PLANISH DIE 3.0 DIA
Mfg. item #: PHD-ST-BTM-6000
BAIPHD-ST-BT{08
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-ST-TOP-FLAT
MASTER FLAT TOP DIE, 3.0DIA.
Mfg. item #: PHD-ST-TOP-FLAT
BAIPHD-ST-TO{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$195.00

3351
PHD-ST-TOP-RUB-
RUBBER TOP DIE 80 DUROMETER 3.0 DIA
Mfg. item #: PHD-ST-TOP-RUB-
BAIPHD-ST-TO{02
FREE shipping when ordered with a machine from this manufacturer.20
$195.00

662
PHD-UTHS-0500
UNIVERSAL TOOL HOLDERS FOR 1/2 THICK BAR STOCK (2PCS SET FOR CUSTOM PROFILES)
Mfg. item #: PHD-UTHS-0500
BAIPHD-UTHS-{00
FREE shipping when ordered with a machine from this manufacturer.20
$389.00

662
PHD-ST-BTM-LIN-
.5 LINEAR LOWER STRETCH DIE, 3.0DIA.
Mfg. item #: PHD-ST-BTM-LIN-
BAIPHD-ST-BT{09
Call for freight quote on this item or we will confirm freight charges before shipping.1
$379.51

3351
PHD-SH-MEC-S-1
MECHANICAL SHRINK DIES (2) 1 X 2
Mfg. item #: PHD-SH-MEC-S-1
BAIPHD-SH-ME{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$569.75

3351
PHD-ST-MEC-S-1
MECHANICAL STRETCH DIES (2) 1 X 2
Mfg. item #: PHD-ST-MEC-S-1
BAIPHD-ST-ME{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$569.75

3351
Copyright © 2020 Smith-Hamilton, Inc
0.034 191219 07:45