Youve been asking Baileigh for years to offer a reasonable racing chassis builder with a revolutionary design. Thus, we went to our head design engineer and in a few days he dreamed up this new machine that will make chassis frame bending a pleasure for those who cant justify one of our larger hydraulic or programmable benders.
The RDB-050 manual tubing bender is revolutionary in design, function and capacity. There is no other manual tube bender on the market with this unique and ingenious design. This bending machine is extremely powerful and can bend up to 2-1/2 in OD mild steel with a wall thickness of .120 in and 2 in OD chromoly with a wall thickness of .120 in
Besides the extreme power of this manual tubing bender, it also has three unique speeds. The proper speed for each application depends on the material type, OD and wall thickness. Speed one (4 degrees per pull) has the most torque and would be used for bending 2 in OD Chromoly or 2-1/2 in OD mild steel. Speed two produces 8 degrees (for intermediate materials), while speed three produces 12 degrees (for lighter gauge materials) with each pull. The operator can continue to bend in one shot without having to stop and reset the machine (operator can bend to 200 degrees without re-pinning).
This manual tube bender has no disassembly or assembly needed to produce a bend. Simply walk up to the tube bending machine and put your tubing into the hook arm insert and begin bending. When the bend is complete, return the machine to the home position and pull your bend out, or position it for the next bend. The RDB-050 manual tubing bender can bend up to 200 degrees and an anti spring back mechanism holds each bend in place as the operator ratchets forward. Note: There isnât a dangerous back lash when releasing the anti spring back mechanism (very important when bending the likes of Chromoly material). When bending, the operator simply pulls the ratchet arm back and forth without having to touch or hold anything in place on the machine.
This manual tubing bender has been so well thought out that when you change over the tooling the machine stays intact. All pivot points utilize aluminum bronze bushings and thrust washers, so there is no metal on metal. The hook arm has quick release inserts to assist when changing over the machine to a different size of tubing. A complete changeover should take no more than one minute.
This manual tube bender has been designed for the small racing chassis builders, off road crowd, rock crawlers, monster trucks, dragsters, dirt circle track, ATV accessories and much more. Solid steel tooling available for this bending machine is specific to chassis building sizes at this time. Our counter die system uses replaceable aluminum bronze inserts which provide the best quality bend on the market.
This manual tube bender can come complete with the stand, bend handle and degree dial, or you can get the machine minus either the stand or handle to fit the tighter budget. It ships via UPS in four separate boxes to keep freight rates reasonable. Some assembly is required.
Specifications | |
---|---|
Model | RDB-050 |
Mild Steel Round Tube (Wall)
|
2 1/2 in (.120)
|
Chromolly Round Tube (Wall)
|
2 in (.120)
|
Minimum OD
|
3/4 in |
Maximum Speed to 180 Degrees
|
1 Minute
|
Maximum Center Line Radius (CLR)
|
7 in |
Minimum CLR
|
3 in |
Power Requirements
|
Manual |
Weight (Lbs.)
|
270 |
Length | 42 in |
Width | 22 in |
Height | 42 in |
RDB-050 Die Set List | |
---|---|
Part Number | PartDescription |
180 Degree Die Sets | |
DS-180-0750T-R300 | 3/4 in Round Tube, 3 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-0875T-R300 | 7/8 in Round Tube, 3 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1000T-R300 | 1 in Round Tube, 3 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1000T-R350 | 1 in Round Tube, 3.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1000T-R400 | 1 in Round Tube, 4 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1250T-R400 | 1-1/4 in Round Tube, 4 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1250T-R450 | 1-1/4 in Round Tube, 4.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1250T-R500 | 1-1/4 in Round Tube, 5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1375T-R400 | 1-3/8 in Round Tube, 4 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1375T-R450 | 1-3/8 in Round Tube, 4.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1375T-R500 | 1-3/8 in Round Tube, 5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1500T-R500 | 1-1/2 in Round Tube, 5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1500T-R550 | 1-1/2 in Round Tube, 5.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1500T-R600 | 1-1/2 in Round Tube, 6 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1625T-R600 | 1-5/8 in Round Tube, 6 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1625T-R650 | 1-5/8 in Round Tube, 6.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1750T-R600 | 1-3/4 in Round Tube, 6 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1750T-R650 | 1-3/4 in Round Tube, 6.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-1750T-R700 | 1-3/4 in Round Tube, 7 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-2000T-R600 | 2 in Round Tube, 6 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-2000T-R650 | 2 in Round Tube, 6.5 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-2000T-R700 | 2 in Round Tube, 7 in CLR, 180 Degree Die Set for RDB-050 |
DS-180-2500T-R700 | 2-1/2 in Round Tube, 7 in CLR, 180 Degree Die Set for RDB-050 |
90 Degree Die Sets | |
DS-90-0750T-R300 | 3/4 in Round Tube, 3 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-0875T-R300 | 7/8 in Round Tube, 3 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1000T-R300 | 1 in Round Tube, 3 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1000T-R350 | 1 in Round Tube, 3.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1000T-R400 | 1 in Round Tube, 4 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1250T-R400 | 1-1/4" Round Tube, 4 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1250T-R450 | 1-1/4 in Round Tube, 4.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1250T-R500 | 1-1/4 in Round Tube, 5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1375T-R400 | 1-3/8 in Round Tube, 4 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1375T-R450 | 1-3/8 in Round Tube, 4.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1375T-R500 | 1-3/8 in Round Tube, 5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1500T-R500 | 1-1/2 in Round Tube, 5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1500T-R550 | 1-1/2 in Round Tube, 5.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1500T-R600 | 1-1/2 in Round Tube, 6 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1625T-R600 | 1-5/8 in Round Tube, 6 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1625T-R650 | 1-5/8 in Round Tube, 6.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1750T-R600 | 1-3/4 in Round Tube, 6 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1750T-R650 | 1-3/4 in Round Tube, 6.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-1750T-R700 | 1-3/4 in Round Tube, 7 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-2000T-R600 | 2 in Round Tube, 6 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-2000T-R650 | 2 in Round Tube, 6.5 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-2000T-R700 | 2 in Round Tube, 7 in CLR, 90 Degree Die Set for RDB-050 |
DS-90-2500T-R700 | 2-1/2 in Round Tube, 7 in CLR, 90 Degree Die Set for RDB-050 |
ADD TO CART NOW FOR FREE SHIPPING ANYWHERE IN THE LOWER 48 STATES